journal article·2023-11Open access

Experimental research on wear mechanism of diamond wheels for grinding Cf/SiC composites grooves

Bing Chen, Hu Xu, Ye Guo, Bing Guo, Guoyue Liu

Abstract

Aiming at the problems of low processing efficiency, low groove shape accuracy and poor surface quality caused by grinding wheel wear in the grinding process of Cf/SiC composite grooves. In this paper, based on the motion mode of grinding wheel grinding, the wear volume formula of grinding wheels was analyzed, and the grinding wheel wear comparison experiment of different bond diamond grinding wheels grinding Cf/SiC composite grooves was carried out, and the more suitable kind of diamond grinding wheel for grinding Cf/SiC composite grooves was selected. From the experimental results, compared with the ceramic-bonded diamond wheel and resin-bonded diamond wheel, the grinding times of electroplated diamond wheel grinding Cf/SiC composites was increased by 20 and 104, respectively, and the surface roughness of the groove was most stable and the processing damage was smallest. Therefore, the best quality of grinding Cf/SiC composites groove was obtained by the electroplated diamond grinding wheel, and its life in grinding Cf/SiC composites was longest. At the same time, the wear mechanism of the electroplated grinding wheel was explored, the wear on the bottom surface of electroplated grinding wheel was more serious than that on the circumferential surface. The wear on the bottom surface was mainly wear and tear, and it gradually diffused along the inner diameter of the grinding wheel with the increasing grinding times.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Influence of laser parameters on processing microgrooves of 2.5-dimensional C/SiC composites via nanosecond laser10.1007/s00170-021-07318-6 ↗
2. Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser10.1007/s00170-020-06499-w ↗
3. Effect of shear strain rate on interlaminar shear behavior of 2D-C/SiC composites: a damage transition from notch ends initiation to gauge section initiation10.1016/j.carbon.2020.05.067 ↗
4. Machining of SiC ceramic matrix composites: a review10.1016/j.cja.2020.08.001 ↗
5. Laser ablation behavior of C/SiC composites subjected to transverse hypersonic airflow10.1016/j.corsci.2021.109345 ↗
6. Research progress of ceramic matrix composite parts based on additive manufacturing technology10.1080/17452759.2019.1607759 ↗
7. Towards understanding the cutting and fracture mechanism in ceramic matrix composites10.1016/j.ijmachtools.2017.03.008 ↗
8. Cryogenic optical testing of an 800mm lightweight C/SiC composite mirror mounted on a C/SiC optical bench10.1364/AO.49.003941 ↗
9. Research progress of fiber reinforced composites by grinding technology for hole making
10. Effect of intermittent cutting behavior on the ultrasonic vibration-assisted grinding performance of Inconel718 nickel-based superalloy10.1016/j.precisioneng.2022.08.006 ↗
11. Vibration coupling effects and machining behavior of ultrasonic vibration plate device for creep-feed grinding of Inconel 718 nickel-based superalloy10.1016/j.cja.2020.12.039 ↗
12. Research progress in preparation and processing technology of C/SiC composites
13. An investigation on wear mechanism of resin-bonded diamond wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire10.1016/j.jmatprotec.2011.11.009 ↗
14. Laser-grinding compound processing of 2.5 dimensional C/SiC composite grooves
15. Experimental evaluation of wear mechanism and grinding performance of SG wheel in machining nickel-based alloy GH4169
16. Alumina abrasive wheel wear in ultrasonic vibration-assisted creep-feed grinding of Inconel 718 nickel-based superalloy10.1016/j.jmatprotec.2021.117241 ↗
17. Development and performance of a novel ultrasonic vibration plate sonotrode for grinding10.1016/j.jmapro.2020.06.030 ↗
18. Material removal behavior of Cf/SiC ceramic matrix composites as a function of abrasive wear during diamond abrasive belt grinding
19. Wear analysis of arc-sharped wheel in aspheric grinding process
20. Diamond wheel wear mechanism and its impact on the surface generation in parallel diamond grinding of RB-SiC/Si10.1016/j.diamond.2017.01.019 ↗
21. Influences of processing parameters on metal-bonded diamond wheel wear when grinding a sapphire wafer10.1016/j.diamond.2021.108275 ↗
22. Feasibility and tool performance of ultrasonic vibration-assisted milling-grinding SiCf/SiC ceramic matrix composite10.1016/j.jmrt.2022.06.063 ↗
23. An investigation of grinding with electroplated CBN wheels10.1016/S0007-8506(07)60581-2 ↗
24. Multi-response optimization of Al alloy-SiC composite machining parameters for minimum tool wear and maximum metal removal rate
25. Analysis of the grinding wheel wear in dependency of the cemented carbide specification10.1007/s00170-018-2362-6 ↗
26. Investigating the grinding performance of unidirectional and 2.5 D C/SiCs10.1016/j.ceramint.2020.10.090 ↗
27. Parameters optimization of laser-grinding chain for processing groove of 2.5-dimensional C/SiC composites10.3390/ma16134761 ↗
28. Affecting factors, optimization, and suppression of grinding marks: a review10.1007/s00170-021-07116-0 ↗
29. Conditioning and monitoring of grinding wheels10.1016/j.cirp.2011.05.003 ↗
30. Dicing of hard and brittle materials with on-machine laser-dressed metal-bonded diamond blades10.1016/j.precisioneng.2013.08.007 ↗
31. A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: laser-induced ablation-assisted grinding10.1016/j.jmatprotec.2022.117503 ↗