Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios
Source abstract
Abstract
This work investigates the electrochemical behavior and discharge performance of Mg–3Al-0.4Ca-0.7Mn alloys with three extrusion ratios (ER) of 10, 16, and 25 as anodes for Mg-air batteries. The results show that the ER16 alloy has the lowest corrosion current density and the highest corrosion resistance. The ER25 slightly reduces the corrosion performance due to excessive discontinuous second phase leading to elevated self-corrosion rate. The alloy exhibits higher discharge voltage and stable discharge process with increasing extrusion ratio. Increasing the extrusion ratio has a homogeneous microstructure, the increase in the area fraction of non-basal oriented grains is conducive to the homogeneous dissolution of the anode and the inhibition of the “chunk effect”. The ER25 alloy showed the highest anode efficiency, specific capacity and energy density of 55.73 %, 1306.67 mA h g-1 and 1635.947 mW h g−1 at 20 mA cm−2, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Microstructure and discharge performance of Mg-La alloys as the anodes for primary magnesium-air batteries10.1016/j.jallcom.2022.165803 ↗
2. Discharge performance of Mg-Y binary alloys as anodes for Mg-air batteries
3. Revealing the influence of crystallographic orientation on the electrochemical and discharge behaviors of extruded diluted Mg–Sn–Zn–Ca alloy as anode for Mg-air battery10.1016/j.jpowsour.2021.230802 ↗
4. A comprehensive review of the development of magnesium anodes for primary batteries10.1039/D1TA01471D ↗
5. Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries10.1016/j.jpowsour.2019.227201 ↗
6. Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg17Al12 phase as the anodes for Mg-air batteries10.1016/j.electacta.2023.143352 ↗
7. Discharge performance of the magnesium anodes with different phase constitutions for Mg-air batteries10.1016/j.jpowsour.2018.06.085 ↗
8. Composition optimization and electrochemical properties of Mg-Al-Sn-Mn alloy anode for Mg-air batteries10.1016/j.matdes.2017.10.031 ↗
9. Effects of heat treatment on the discharge behavior of Mg-6wt.% Al-1wt.% Sn alloy as anode for magnesium-air batteries10.1007/s11665-017-2733-4 ↗
10. Wrought Mg-Al-Pb-RE alloy strips as the anodes for Mg-air batteries10.1016/j.jpowsour.2019.226855 ↗
11. Enhancement of corrosion resistance and discharge performance of Mg–5Li–3Al–1Zn sheet for Mg-air battery via rolling10.1149/1945-7111/aba339 ↗
12. Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries10.1016/j.jmst.2020.05.067 ↗
13. Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries10.1016/j.jpowsour.2018.12.092 ↗
14. Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery10.1016/j.jpowsour.2023.233569 ↗
15. Effect of Al and Pb contents on the corrosion electrochemical properties and activation of Mg-Al-Pb alloy anode10.1149/2.1211702jes ↗
16. Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion10.1016/j.jmst.2020.04.057 ↗
17. Corrosion properties of ECAP-processed Mg− Al− Ca− Mn alloys with separate Al2Ca and Mg2Ca phases10.1016/S1003-6326(22)65963-6 ↗
18. Tailoring the corrosion behavior and mechanism of AZ31 magnesium alloys by different Ca contents for marine application10.1016/j.corsci.2021.109842 ↗
19. Discharge properties of Mg–Al–Mn–Ca and Mg–Al–Mn alloys as anode materials for primary magnesium–air batteries10.1016/j.jpowsour.2015.08.042 ↗
20. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
21. Enhancement of the discharge performance of AP65 magnesium alloy anodes by hot extrusion10.1016/j.corsci.2013.12.005 ↗
22. Effects of microstructure on the electrochemical discharge behavior of Mg-6wt% Al-1wt% Sn alloy as anode for Mg-air primary battery10.1016/j.jallcom.2016.12.172 ↗
23. The role of Al2Gd cuboids in the discharge performance and electrochemical behaviors of AZ31-Gd anode for Mg-air batteries10.1016/j.energy.2019.116314 ↗
24. Elucidating the dependence of electrochemical behavior and discharge performance on the grain structure of lean Mg-0.3Bi-0.3Ag-0.3In anodes in primary Mg-air battery10.1016/j.jpowsour.2023.232856 ↗
25. Electrochemical performance of Mg-3Al modified with Ga, in and Sn as anodes for Mg-air battery10.1149/2.0371607jes ↗
26. Magnesium alloys as anodes for neutral aqueous magnesium-air batteries10.1016/j.jma.2021.04.011 ↗
27. Electrochemical properties and discharge performance of Mg-3Sn-xCa alloy as a novel anode for Mg-air battery10.1016/j.jallcom.2022.167849 ↗
28. Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet10.1016/j.actamat.2017.05.027 ↗
29. Role of micro-Ca/In alloying in tailoring the microstructural characteristics and discharge performance of dilute Mg-Bi-Sn-based alloys as anodes for Mg-air batteries
30. Texture weakening and ductility variation of Mg–2Zn alloy with CA or RE addition10.1016/j.msea.2015.08.025 ↗
31. In-situ EBSD analysis of microstructural evolution and damage behavior of Mg-Al-Ca-Mn alloys with different extrusion ratios10.1016/j.matchar.2023.112781 ↗
32. Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ3110.1016/j.jallcom.2020.153844 ↗
33. The effect of grain size on aluminum anodes for Al–air batteries in alkaline electrolytes10.1016/j.jpowsour.2015.03.063 ↗
34. Revisiting the electrochemical impedance spectroscopy of magnesium with online inductively coupled plasma atomic emission spectroscopy10.1002/cphc.201402666 ↗
35. The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery10.1016/j.jpowsour.2020.227807 ↗
36. AZ31 magnesium alloy with ultrafine grains as the anode for Mg-air battery10.1016/j.electacta.2021.138135 ↗
37. Tailoring the microstructure of Mg-Al-Sn-RE alloy via friction stir processing and the impact on its electrochemical discharge behaviour as the anode for Mg-air battery
38. Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2 Zr alloy10.1016/j.corsci.2019.108338 ↗
39. Influence of grain size on mechanical and corrosion properties of magnesium alloy for medical implants10.1002/mawe.200900434 ↗
40. Discharge properties of low-alloyed Mg–Bi–Ca alloys as anode materials for Mg–air batteries: influence of Ca alloying10.1016/j.jallcom.2020.153779 ↗
41. Corrosion mechanism and hydrogen evolution on Mg10.1016/j.cossms.2014.09.005 ↗
42. Electrochemical performance of Mg-Al-Zn and Mg-Al-Zn-Ce alloys as anodes for Mg-air battery10.20964/2018.11.89 ↗
43. Hypoeutectic Mg–Zn binary alloys as anode materials for magnesium-air batteries10.1016/j.jallcom.2020.157579 ↗
44. High-energy and durable aqueous magnesium batteries: recent advances and perspectives10.1016/j.ensm.2021.09.008 ↗
45. Crystal orientation and electrochemical corrosion of polycrystalline Mg10.1016/j.corsci.2012.05.019 ↗
46. The high corrosion-resistance of ultra-high purity Mg–Ge alloy and its discharge performance as anode for Mg–air battery10.1016/j.electacta.2023.142127 ↗
47. A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries10.1016/j.jma.2023.05.004 ↗
48. Unveiling the effect of Al-Mn intermetallic on the micro-galvanic corrosion of AM50 Mg alloy in NaCl solution10.1016/j.jmrt.2023.07.168 ↗
49. Influence of crystallographic texture and grain size on the corrosion behaviour of as-extruded Mg alloy AZ31 sheets10.1016/j.corsci.2017.08.004 ↗
50. Effects of grain size on the corrosion and discharge behaviors of Mg–Y binary alloys for Mg-air batteries10.1149/1945-7111/abb7dd ↗