Ignition and energy release characteristics of energetic high-entropy alloy HfZrTiTa0.2Al0.8 under dynamic loading
Source abstract
Abstract
Steel-like density HfZrTiTa0.2Al0.8 high entropy alloy (HEA) with a density of 7.78 g/cm3 is designed and fabricated as a novel energetic structural material (ESM). The microstructure, thermal analysis, compressive mechanical properties, ignition and energy release under dynamic loading are systemically investigated. The experimental results show that the HfZrTiTa0.2Al0.8 HEA has a single BCC solid solution structure, and spinodal decomposition with elements segregation in the nanoscale is observed. Thermal analysis shows the HEA keeps stable in the Ar atmosphere and the oxidizing reaction occurs in the Air atmosphere. The mechanical properties show brittle characteristics with maximum strength with 1520 MPa and fracture strain 0.07 and strain rate effect from 0.001s−1 to 3000s−1 is observed. Under high strain rate loading, the fracture-induced spark is observed, which is caused by an oxidizing reaction due to the rise. By direct ballistic test, the energy release velocity threshold is measured as 980 m/s, and the energy release intensity is more violent in higher velocity impact conditions. Moreover, the impact reaction degree is increased with increasing fragmentation degree and adiabatic temperature rise induced by impact. The designed HEA-ESM is a promising candidate that simultaneously possesses both high strength, high reactive heat and excellent energetic characteristics in the application field of high-strength ESM fragment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Microstructure characterization of Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
2. Nanostructured high-entropy alloys with Multiple principal elements: novel alloy Design concepts and Outcomes10.1002/adem.200300567 ↗
3. Excellent strength-ductility synergy in a novel single-phase equiatomic CoFeNiTiV high entropy alloy10.1016/j.ijrmhm.2020.105416 ↗
4. Fabrication of Nanocrystalline AlCoCrFeNi high entropy alloy through shock Consolidation and mechanical alloying10.3390/e21090880 ↗
5. NbMoTaW refractory high entropy alloy composites strengthened by in-situ metal-non-metal compounds10.1016/j.jallcom.2019.153423 ↗
6. Dynamic behavior and microstructure characterization of TaNbHfZrTi high-entropy alloy at a wide range of strain rates and temperatures10.1016/j.ijmecsci.2020.105738 ↗
7. Joining AlCoCrFeNi high entropy alloys and Al-6061 by explosive welding method10.1016/j.vacuum.2020.109221 ↗
8. Shi · 2017
9. Microstructures and mechanical properties of Ti NbMoTaW refractory high-entropy alloys10.1016/j.msea.2017.12.004 ↗
10. Irradiation resistance mechanism of the CoCrFeMnNi equiatomic high-entropy alloy10.1038/s41598-020-79775-0 ↗
11. High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing10.1016/j.matdes.2021.109462 ↗
12. Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa0.5310.1016/j.matdes.2017.08.022 ↗
13. Compression properties and impact energy release characteristics of TiZrNbV high-entropy alloy10.1016/j.msea.2021.142074 ↗
14. Effect of lattice distortion on the diffusion behavior of high-entropy alloys10.1016/j.jallcom.2020.154099 ↗
15. Dynamic mechanical behavior and penetration performance of WFeNiMo high-entropy alloy
16. Impact-initiated behavior and reaction mechanism of W/Zr composites with SHPB setup10.1063/1.4967340 ↗
17. Fragmentation of structural energetic materials: implications for performance
18. Effect of dynamic fragmentation on the reaction characteristics of a Zr-based metallic glass10.1016/j.jnoncrysol.2019.04.022 ↗
19. Effects of microstructure on the dynamic properties of TA15 titanium alloy10.1016/j.mechmat.2019.103121 ↗
20. Vented chamber calorimetry for impact-initiated energetic materials
21. Dynamic fragmentation of a Zr-based metallic glass under various impact velocities10.1007/s10853-020-05495-5 ↗
22. Influence of additives on microstructures, mechanical properties and shock-induced reaction characteristics of Al/Ni composites10.1016/j.jallcom.2015.07.004 ↗
23. The shock-induced chemical reaction behaviour of Al/Ni composites by cold rolling and powder compaction10.1007/s10853-019-03357-3 ↗
24. Impact-induced initiation and energy release behavior of reactive materials10.1063/1.3644974 ↗
25. The energy release characteristics of shock-induced chemical reaction of Al/Ni composites10.1021/acs.jpcc.6b06530 ↗
26. Fischer · 1996
27. Experimental study of the compression properties of Al/W/PTFE granular composites under elevated strain rates10.1016/j.msea.2013.05.063 ↗
28. Kinetic study of thermal- and impact-initiated reactions in Al–Fe2O3 nanothermite, Combust10.1016/j.combustflame.2010.07.012 ↗
29. Effects of microstructure on mechanical and energy release properties of Ni–Al energetic structural materials10.1016/j.msea.2022.143332 ↗
30. Quasi-static and dynamic response of explosively consolidated metal–aluminum powder mixtures10.1016/j.actamat.2011.10.027 ↗
31. Preparation and dynamic compression properties of Zr-W multifunctional energetic structural material
32. Effect of in-situ crystalline phases on the mechanical properties and energy release behaviors of Zr55Ni5Al10Cu30 bulk metallic glasses10.1016/j.intermet.2020.106720 ↗
33. Mott · 2006
34. Mott · 1947 · vol. 189 · 300
35. Grady · 1985 · vol. 58
36. Impact fragmentation of high-velocity compact projectiles on thin plates: a physical and statistical characterization of fragment debris10.1016/S0734-743X(01)00085-9 ↗
37. Length scales and size distributions in dynamic fragmentation10.1007/s10704-009-9418-4 ↗
38. Fragment size distributions from the dynamic fragmentation of brittle solids10.1016/j.ijimpeng.2008.07.042 ↗