Enhancing mechanical performance of green fiber cement composites: Role of eco-friendly alkyl ketene dimer on surfaces of hemp fibers
Source abstract
Abstract
Fiber composites reinforced natural fibers have attracted more attention in sustainable building materials due to the high Young's modulus, availability, and biodegradability. However, poor interfacial bonding of the fiber-reinforced cement composites attributed to the intrinsically swelling-shrinkage behavior of the hydrophilic natural fibers, seriously limits the strength development of the composite. Here, an eco-friendly and low-cost surface treatment agent, alkyl ketene dimer (AKD), is innovatively introduced for reinforcing the combined effect of hemp fiber (HF)/cement matrix. The experimental approach includes the chemical modification of hemp fibers, followed by the direct preparation of fiber cement composites. Fourier transformation infrared spectroscopy (FTIR) and water absorption test analyses confirmed that the modified HF surface was successfully grafted with AKD, leading to superior hydrophobic characterization and reduced swelling-shrinking behavior. Adding the modified HF to the cement composites effectively enhanced their mechanical properties and toughness capacity by strengthening the interfacial bond of modified HF/Mortar. The modified fiber-reinforced mortar has the highest increment (28 % in compressive strength and 24 % in flexural strength, respectively) from 7 d to 28 d among all investigated mortars. Furthermore, the micro-observation of fractured mortar composites supports the strengthened interface of the modified fibers/cement matrix. The study provides a feasible and practical approach to improving the comprehensive strength properties of hemp fiber-reinforced cement composites. It benefits the practical industrial-scale application of biomaterials in low-cost housing, thus enhancing sustainability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Innovative concrete reinforcement materials · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Reinforcement-matrix interactions and their consequences on the mechanical behavior of basalt fibers-cement composites10.1016/j.conbuildmat.2021.125103 ↗
2. Fiber-reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
3. The role of fiber reinforcement in mitigating shrinkage cracks in concrete
4. Crack growth resistance of hybrid fiber reinforced cement composites10.1016/S0958-9465(01)00043-9 ↗
5. Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface10.1016/j.compositesb.2020.108011 ↗
6. Chemical and microstructural changes at alkali‐resistant glass fiber–cement interfaces10.1111/j.1151-2916.1991.tb04301.x ↗
7. Strength and reliability of carbon-fiber-reinforced cement composites10.1016/0958-9465(94)90026-4 ↗
8. Superflexible yet robust functionalized carbon nanotube fiber reinforced sulphoaluminate cement-based grouting materials with excellent mechanical, electrical and thermal properties10.1016/j.conbuildmat.2022.126999 ↗
9. Plasma-functionalized graphene fiber reinforced sulphoaluminate cement-based grouting materials10.1016/j.ceramint.2021.02.104 ↗
10. The effect of processing on the bond and interfaces in steel fiber reinforced cement composites10.1016/0958-9465(96)00022-4 ↗
11. Development and characterization of hybrid polyethylene fiber reinforced cement composites10.1016/0950-0618(93)90006-X ↗
12. Polyvinyl alcohol fiber reinforced engineered cementitious composites: material design and performances
13. Strain hardening behavior of lightweight hybrid polyvinyl alcohol (PVA) fiber reinforced cement composites10.1617/s11527-010-9691-8 ↗
14. Hornification on vegetable fibers to improve fiber-cement composites: a critical review
15. Effect of hornification on the structure, tensile behavior, and fiber-matrix bond of sisal, jute, and curauá fiber cement-based composite systems10.1016/j.conbuildmat.2016.10.004 ↗
16. A review of the use of coconut fiber in cement composites10.3390/polym15051309 ↗
17. Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite10.1016/j.conbuildmat.2014.12.091 ↗
18. The potential of hemp (Cannabis sativa L.) for sustainable fiber production: a crop physiological appraisal10.1111/j.1744-7348.1996.tb05736.x ↗
19. New developments in fiber hemp (Cannabis sativa L.) breeding10.1016/j.indcrop.2014.08.011 ↗
20. 2023
21. Hemp fiber and its composites–a review10.1177/0021998311413623 ↗
22. Compressive and flexural properties of hemp fiber reinforced concrete10.1007/BF02902998 ↗
23. Effects of hemp fibers on characteristics of cement-based mortar10.1016/j.conbuildmat.2018.03.029 ↗
24. Mechanical behavior of cementitious composites reinforced with bagasse and hemp fibers10.1016/j.conbuildmat.2019.117856 ↗
25. Experimental investigation on the influence of immersion/drying cycles on the hygrothermal and mechanical properties of hemp concrete
26. Parveen · 2017 · 343
27. Effect of chemical modification on properties of hybrid fiber biocomposites10.1016/j.compositesa.2007.10.002 ↗
28. Influence of an impregnation treatment on the morphology and mechanical behavior of flax yarns embedded in hydraulic lime mortar10.3390/fib7040030 ↗
29. Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites10.1016/j.compositesb.2017.09.030 ↗
30. Mechanical behavior of chemically-treated hemp fibers reinforced composites subjected to moisture absorption10.1016/j.jmrt.2022.11.152 ↗
31. Effect of drying and rewetting cycles on the structure and physicochemical characteristics of softwood fibers for reinforcement of cementitious composites10.1016/j.carbpol.2009.07.057 ↗
32. Fidelis · 2012
33. Ohama · 1995
34. Silane treatment of bagasse fiber for reinforcement of cementitious composites10.1016/j.compositesa.2008.05.013 ↗
35. A novel surface treatment for bamboo flour and its effect on the dimensional stability and mechanical properties of high-density polyethylene/bamboo flour composites10.1016/j.conbuildmat.2018.08.003 ↗
36. Effect of a novel coupling agent, alkyl ketene dimer, on the mechanical properties of wood–plastic composites10.1016/j.matdes.2014.02.048 ↗
37. A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites10.1002/pc.20040 ↗
38. Improving the interface compatibility and mechanical performances of the cementitious composites by low-cost alkyl ketene dimer modified fibers10.1016/j.conbuildmat.2023.132186 ↗
39. Enhancement of hydrophobicity of nanofibrillated cellulose through grafting of alkyl ketene dimer10.1007/s10570-018-2048-0 ↗
40. Standardization Ecf. Methods of testing cement-Part 1: Determination of strength. EN 196-12005.
41. Experimental study on dynamic mechanical properties and constitutive model of basalt fiber reinforced concrete10.1016/j.conbuildmat.2017.06.177 ↗
42. Wetting analysis and surface characterization of flax fibers modified with zirconia by sol-gel method10.1016/j.surfcoat.2017.02.008 ↗
43. Performance enhancement of asphalt mixtures enabled by bamboo fibers and acrylated epoxidized soybean oil
44. Measurement of properties of fiber reinforced concrete
45. Influence of acrylic latex and pre-treated hemp fibers on cement-based mortar properties
46. Improving the flexibility and durability of aged paper with bacterial cellulose
47. Quantitative analysis of concrete property under effects of crack, freeze-thaw, and carbonation10.1016/j.conbuildmat.2016.10.113 ↗
48. Evaluation of compatibility between beetle-killed lodgepole pine (pinus contorta var. Latifolia) wood with Portland cement10.3390/ma3125311 ↗
49. Wood-cement compatibility review
50. Using alternative waste coir fibers as a reinforcement in cement-fibre composites10.1016/j.conbuildmat.2019.117121 ↗
51. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review10.1007/s10924-006-0042-3 ↗
52. Mechanism of fiber/matrix bond and properties of wood polymer composites produced from alkaline‐treated D aniella oliveri wood flour10.1002/pc.23460 ↗
53. Chain length and thermal sensitivity of the infrared spectra of a homologous series of anhydrous silver(I) n-alkanoates10.1155/2016/3068430 ↗
54. Comparative study of functional groups in natural fibers: Fourier transform infrared analysis (FTIR)
55. Influence of alkali treatment on the structure and properties of hemp fibers10.1007/s12221-013-0389-8 ↗
56. Polyaniline and magnetite on curaua fibers for molecular interface improvement with a cement matrix
57. Composition, structure, and mechanical properties of hemp fiber reinforced composite with recycled high-density polyethylene matrix10.1177/0021998311427778 ↗
58. Preparation and characterization of alkyl ketene dimer (AKD) modified cellulose composite membrane10.1016/j.carbpol.2011.10.062 ↗
59. Characterization of natural fiber surfaces and natural fiber composites10.1016/j.compositesa.2008.07.007 ↗
60. Charpy impact test of epoxy composites reinforced with untreated and mercerized mallow fibers10.1016/j.jmrt.2018.03.008 ↗
61. Preparation and infrared study of cellulose-based amphiphilic materials
62. Effect of fiber surface treatment on the fiber–matrix bond strength of natural fiber reinforced composites10.1016/S1359-8368(98)00054-7 ↗
63. Anisotropic behavior in bending of 3D printed concrete reinforced with fibers10.1016/j.compstruct.2020.112808 ↗
64. Glutaraldehyde crosslinking of arabinoxylan produced from corn ethanol residuals10.1007/s10570-015-0828-3 ↗
65. Seebeck effect and mechanical properties of carbon nanotube-carbon fiber/cement nanocomposites
66. Balasubramanian, Chandrashekaran J, Selvan D. Experimental investigation of natural fiber reinforced concrete in construction industry.
67. Mechanical properties of geopolymer composites reinforced with natural fibers10.1016/j.proeng.2016.07.395 ↗
68. The influence of wood extractives and additives on the hydration kinetics of cement paste and cement-bonded particleboard10.3923/jas.2011.2186.2192 ↗
69. Jute fiber/epoxy composites: surface properties and interfacial adhesion10.1016/j.compscitech.2012.03.025 ↗
70. Hydration and internal curing properties of plant-based natural fiber-reinforced cement composites
71. Effect of abaca natural fiber on the setting behavior and autogenous shrinkage of cement composite
72. Role of homogenization and surface treatment of flax fiber on performance of cement-based composites
73. Natural fiber-reinforced mortars
74. Comparative study of composition, structure, and properties of Apocynum venetum fibers under different pretreatments10.1016/j.carbpol.2006.12.028 ↗
75. Study of modifications on the chemical and mechanical compatibility between cement matrix and oil palm fibers10.1016/j.rineng.2020.100150 ↗
76. Impact of hemp shiv extractives on the hydration of Portland cement10.1016/j.conbuildmat.2020.118300 ↗
77. Effect of treated Alfa fibers on hydration kinetics, mechanical, and adhesion properties of fiber cement composite
78. Le Hoang · 2013
79. Impact of Alfa fibers morphology on hydration kinetics and mechanical properties of cement mortars10.1016/j.conbuildmat.2021.123514 ↗
80. A review: natural fiber composites selection in view of mechanical, light weight, and economic properties10.1002/mame.201400089 ↗
81. Microstructure evolution of lime putty upon aging10.1016/j.jcrysgro.2010.05.020 ↗
82. Myerson · 2002
83. Specimen preparation for nano-scale investigation of cementitious repair material10.1016/j.micron.2018.01.007 ↗
84. Degradation behavior and kinetics of sisal fiber in pore solutions of sustainable cementitious composite containing metakaolin10.1016/j.polymdegradstab.2018.01.027 ↗
85. Combined utilization of construction and demolition waste and propylene fiber in cement-stabilized soil10.3390/buildings12030350 ↗
86. The effects of hemicelluloses and lignin removal on water uptake behavior of hemp fibers10.1016/j.biortech.2007.12.073 ↗
87. Effect of fiber treatments on the sisal fiber properties and fiber–matrix bond in cement-based systems10.1016/j.conbuildmat.2015.10.120 ↗
88. Interfacial modification of hemp fiber–reinforced composites
89. Ultrahigh performance of nanoengineered graphene-based natural jute fiber composites10.1021/acsami.9b04696 ↗