journal article·2021-11Open access

Experimental and numerical investigation of single-pass laser welding of 20 mm-thick high-strength steel under reduced ambient pressure

Meng Jiang, Nan Jiang, Xi Chen, Shengchong Ma, Yuan Chen, Yanbin Chen, Zhenglong Lei

Abstract

The currently available high-power laser presents significant opportunities for welding of thick section components in single-pass. However, weld defects frequently occur and depth of penetration is usually lower than expected in this situation. In this work, a process of laser welding under reduced ambient pressure was investigated to achieve a single-pass complete-joint-penetration weld of 20 mm-thick high-strength steel. An experimental and theoretical program of investigation was undertaken to evaluate the characteristic of this welding process. The weld appearance, porosity inside the weld metal, microstructure and mechanical properties of weld joint were examined experimentally. The temperature field was calculated numerically using a 3D heat transfer and fluid flow model. A defect-free sound weld joint of 20 mm-thick plate was obtained just using an 8-kW laser power. The weld joint showed a very high aspect ratio characteristic of electron beam welding. From base metal (BM) to fusion zone (FZ) through heat-affected zone (HAZ), the microhardness varied significantly duo to their different microstructures resulted from the various peak temperatures and cooling rates for varying distances from weld center. All the tensile test samples fractured at the BM away from HAZ and FZ, which suggested that the welded metal was stronger than BM. The calculated weld geometry agreed with the corresponding experimental results through considering the role of ambient pressure. Their good agreement indicated the validity of the potential causative variables considered in the simulations. The modelling results also showed that the weld pool had a lower peak temperature and thinner liquid weld metal around keyhole under reduced ambient pressure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Laser and Thermal Forming Techniques · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. High power disk laser-metal active gas arc hybrid welding of thick high tensile strength steel plates10.2351/1.4934939 ↗
2. Comparison of processing window and porosity distribution in laser welding of 10 mm thick 30CrMnSiA ultrahigh strength between flat (1G) and horizontal (2G) positions10.2351/1.4943992 ↗
3. Influence of alternating magnetic field on microstructure and mechanical properties of laser-MIG hybrid welded HG785D steel joint10.1016/j.jmrt.2020.09.122 ↗
4. Inhomogeneous microstructure and fatigue crack propagation of thick-section high strength steel joint welded using double-sided hybrid fiber laser-arc welding10.1016/j.optlastec.2020.106668 ↗
5. Microstructure and mechanical properties of a thick-section high-strength steel welded joint by novel double-sided hybrid fibre laser-arc welding10.1016/j.msea.2013.05.077 ↗
6. Mitigation of root defect in laser and hybrid laser Arc Welding
7. Comparison of processing window in full penetration laser welding of thick high-strength steel under atmosphere and sub-atmosphere10.1016/j.optlastec.2018.08.023 ↗
8. Correlation between the spatters and evaporation vapor on the front keyhole wall during fiber laser keyhole welding10.1016/j.jmrt.2020.10.103 ↗
9. Effect of beam oscillating behavior on pore inhibition and microstructure evolution mechanisms of laser welded Q235 steel10.1016/j.jmrt.2021.02.033 ↗
10. Zoning study on the fatigue crack propagation behaviors of a double-sided electron beam welded joint of TC4 titanium alloy with the thickness of 140 mm10.1016/j.ijfatigue.2021.106145 ↗
11. Through-thickness microstructure and mechanical properties of electron beam welded 20 mm thick AISI 316L austenitic stainless steel10.1016/j.matdes.2017.05.080 ↗
12. The impact of transformation plasticity on the electron beam welding of thick-section ferritic steel components10.1016/j.nucengdes.2017.03.040 ↗
13. Electron beam welding - techniques and trends - Review10.1016/j.vacuum.2016.05.004 ↗
14. Laser welding under vacuum: a review10.3390/app7090909 ↗
15. Welding of high thicknesses using a fibre optic laser up to 30 kW10.1080/09507116.2011.600043 ↗
16. Ultra high power (100 kW) fiber laser welding of steel10.1364/OL.43.004667 ↗
17. High quality welding of stainless steel with 10 kW high power fibre laser10.1179/136217108X372531 ↗
18. Optimization of deep penetration laser welding of thick stainless steel with a 10kW fiber laser10.1016/j.matdes.2013.06.066 ↗
19. Advanced welding analysis methods applied to heavy section welding with a 15 kW fiber laser
20. Welding with high-power lasers: trends and developments10.1016/j.phpro.2016.08.003 ↗
21. Numerical simulation of full-penetration laser beam welding of thick aluminium plates with inductive support10.1088/0022-3727/45/3/035201 ↗
22. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel10.1016/j.jmatprotec.2013.11.013 ↗
23. Full penetration laser beam welding of thick duplex steel plates with electromagnetic weld pool support10.2351/1.4944103 ↗
24. Fundamental phenomena in high power CO_2 laser (report II): vacuum laser welding (welding physics, process & instrument)
25. Effect of reduced pressure atmosphere on weld geometry in partial penetration laser welding of stainless steel and aluminium alloy with high power and high brightness laser10.1179/1362171813Y.0000000182 ↗
26. Laser beam welding in vacuum – a process variation in comparison with electron beam welding
27. Laser beam welding under vacuum of high grade materials10.1007/s40194-016-0302-3 ↗
28. Welding of thick plate copper with laser beam welding under vacuum10.2351/1.4983165 ↗
29. Influence of ambient pressure on spattering and weld seam quality in laser beam welding with the solid-state laser
30. Effect of subatmospheric pressure on plasma plume in fiber laser welding10.1016/j.jmatprotec.2014.08.011 ↗
31. Increasing keyhole stability of fiber laser welding under reduced ambient pressure10.1016/j.jmatprotec.2019.01.026 ↗
32. Mitigation of porosity defects in fiber laser welding under low vacuum10.1016/j.jmatprotec.2019.116385 ↗
33. Improving thermal efficiency and stability of laser welding process for magnesium alloy by combining power modulation and subatmospheric pressure environment
34. The effect of reduced pressure on laser keyhole weld porosity and weld geometry in commercially pure titanium and nickel
35. 2009
36. 2001
37. Enhanced penetration depth during reduced pressure keyhole-mode laser welding10.29391/2020.99.011 ↗
38. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium10.1088/0022-3727/40/18/037 ↗
39. A computationally efficient model of convective heat transfer and solidification characteristics during keyhole mode laser welding10.1063/1.2537587 ↗
40. Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid welding10.1179/136217108X356782 ↗
41. A model of deep penetration laser welding based on calculation of the keyhole profile10.1088/0022-3727/27/9/002 ↗
42. Analysis of the physical processes occurring during deep penetration laser welding under reduced pressure10.2351/1.4944002 ↗
43. Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser10.1016/j.jmatprotec.2014.03.016 ↗
44. Root defects in full penetration laser welding of thick plates using steady electromagnetic force10.1016/j.jmatprotec.2018.05.009 ↗
45. Welding thick steel plates with fibre lasers and GMAW10.1007/BF03263489 ↗
46. Study of filler metal mixing and its implication on weld homogeneity of laser-hybrid and laser cold-wire welded thick austenitic stainless steel joints
47. Full penetration laser beam welding of thick duplex steel plates with electromagnetic weld pool support10.2351/1.4944103 ↗
48. Comparison of laser welds in thick section S700 high-strength steel manufactured in flat (1G) and horizontal (2G) positions10.1016/j.cirp.2015.04.070 ↗
49. Deep penetration laser welding of austenitic stainless steel thick-plates using a 20 kW fiber laser10.2351/1.5094176 ↗
50. ISO 13919-1 · 1996
51. Microstructure and mechanical properties of laser welded S960 high strength steel10.1016/j.matdes.2015.07.037 ↗