Characterization and machining studies of nano borosilicate particles reinforced aluminium alloy composites using AWJM process
Source abstract
Abstract
This work documents the experimental examination on mechanical properties of novel nano-boro silicate particles (nBSp) reinforced aluminium metal matrix nanocomposite (AMMNC) and machinability evaluation of the fabricated nanocomposite using Abrasive Waterjet Machining (AWJM) by adopting Taguchi's experimental design considering pressure, rate of abrasive feed and stand-off distance. Simultaneous optimization of outputs viz., material removal rate (MRR) and average roughness (Ra) is done by adopting The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) methodology. In aluminium alloy 7075 (AA7075), different weight fractions of nBSp (3%, 6% and 9%) are reinforced, AMMNC is fabricated via liquid processing technique. Mechanical features like tensile and compressive strength and hardness are assessed based on ASTM procedures. Higher addition of nBSp produces higher tensile strength (22.14%), compressive strength (29.01%), hardness (21.49%), wear resistance (64.51%) and corrosion resistance (98.6%) as compared with as-cast AA7075. Machining studies indicate that with the increase in the percentages of nBSp leads to higher SR and MRR and higher abrasive flow rate is needed for removing material in 9%nBSp nano composite.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Erosion and Abrasive Machining · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. A model for abrasive water jet machining10.1115/1.3226448 ↗
2. Waterjet-An innovative tool for manufacturing10.1016/j.jmatprotec.2009.05.025 ↗
3. Momber · 1998
4. Optimization factors in abrasive-waterjet machining10.1115/1.2899619 ↗
5. A fuzzy based decision model for nontraditional machining process selection10.1007/s00170-013-5474-z ↗
6. Multi-attribute decision making for green electrical discharge machining10.1016/j.eswa.2011.01.026 ↗
7. Comparative analysis of multi-criteria decision making methodologies and implementation of a warehouse location selection problem10.1016/j.eswa.2011.02.022 ↗
8. Abrasive water jet machining of Al6063/B4C/ZrSiO4 hybrid composites: a study of machinability and surface characterization analysis
9. Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining10.1007/s00170-016-9669-y ↗
10. Hybrid aluminium matrix composite AWJ turning using olivine and Barton garnet10.1007/s00170-017-1036-0 ↗
11. Prediction of surface roughness quality of green abrasive water jet machining: a soft computing approach10.1007/s10845-015-1169-7 ↗
12. Experimental investigation into the effect of abrasive process parameters on the cutting performance for abrasive waterjet technology: a case study10.1007/s00170-020-05183-3 ↗
13. Masked micro-channel machining in aluminum alloy and borosilicate glass using abrasive water jet micro-machining10.1016/j.jmapro.2018.08.017 ↗
14. Investigations on AWJ cutting process of hybrid aluminium 7075 metal matrix composites using nozzle oscillation technique
15. Optimization of machining parameters for surface roughness during abrasive water jet machining of aluminium/magnesium hybrid metal matrix composites
16. Characterization and optimization of Abrasive Water Jet Machining parameters of aluminium/tungsten carbide composites10.1016/j.measurement.2017.11.059 ↗
17. Selection of a manufacturing process with multiple attributes - a case study10.1016/0923-4748(95)00011-7 ↗
18. A combined TOPSIS-AHP-method-based approach for non-traditional machining processes selection10.1243/09544054JEM1238 ↗
19. Taguchi Optimization of Multi objective CNC machining using TOPSIS10.3923/itj.2009.917.922 ↗
20. Optimization of correlated multiple responses of ultrasonic machining (USM) process10.1007/s00170-010-2905-y ↗
21. Machinability evaluation of work materials using a combined multiple attribute decision-making method10.1007/s00170-004-2348-4 ↗
22. Grinding wheel abrasive material selection using fuzzy TOPSIS method10.1080/10426914.2012.700159 ↗
23. Mechanical and wear behavior of AA7075 aluminum matrix composites reinforced by Al2O3 nanoparticles10.1080/20550324.2019.1637576 ↗
24. Microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds – effect of post weld heat treatment10.1016/j.dt.2015.04.003 ↗
25. Borosilicate glasses
26. Mechanical and thermal behavior of chilled aluminum alloy (Lm-25) reinforced with borosilicate glass particulate metal matrix composites (MMCs)
27. Roy · 2001
28. Optimization of machining and geometrical parameters in turning process using Taguchi method10.7158/M12-113.2014.12.2 ↗
29. Ross · 2005
30. Taguchi's Methodology of optimizing turning parameters over Chip Thickness Ratio in machining P/M AMMC10.1007/s42452-019-0170-8 ↗
31. Machinability evaluation of Al–4%Cu–7.5%SiC metal matrix composite by Taguchi–Grey relational analysis and NSGA-II10.1007/s12046-016-0546-z ↗
32. Hwang · 1981
33. Yoon · 1980
34. Parametric optimization of WEDM control variables on magnesium AZ91 alloy by TOPSIS method
35. Optimization of machining parameters in turning operation using combined TOPSIS and AHP method
36. Investigations of micro-milling parameters in woven banana fibre reinforced polymer composite filled with rice bran particles
37. An experimental analysis and optimization of heat treatment parameters of Al6061 alloy for improved mechanical properties
38. An investigation on microstructure and mechanical behaviour of copper-nickel coated carbon fibre reinforced aluminium composites10.1088/2053-1591/abcb4c ↗
39. Evaluation of mechanical properties of aluminium alloy (LM25) reinforced with fused silica metal matrix composite
40. Investigations on LM6 metal matrix composite with borosilicate glass reinforcement for aerospace applications10.1088/1757-899X/247/1/012012 ↗
41. Fabrication and mechanical characterization of stir cast AA6063-borosilicate-fly ash hybrid metal matrix composites10.14419/ijet.v7i3.6.14949 ↗
42. Evaluation of mechanical properties of aluminium 6063 - borosilicate reinforced metal matrix composite10.1063/5.0025114 ↗
43. Whan · 1992 · vol. 10
44. 2004
45. 2011
46. Chandler · 1999
47. Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites10.1016/j.measurement.2012.11.034 ↗
48. Revie · 2011
49. Synthesis and characterization of silicon nitride reinforced Al-Mg-Zn alloy composites10.1007/s12540-020-00906-3 ↗
50. Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method10.1016/j.jmrt.2020.03.043 ↗
51. Gr–Al composite reinforced with Si3N4 and SiC particles for enhanced microhardness and reduced thermal expansion10.1007/s42452-020-2838-5 ↗
52. Zum Gahr · 1987 · vol. 10 · 351
53. Characterization studies of ceramic-based composites related to functionalized filler-matrix interface
54. A review on the corrosion behaviour of nanocoatings on metallic substrates10.3390/ma12020210 ↗
55. Impact of nozzle design on surface roughness of abrasive jet machined glass fibre reinforced polymer composites10.1007/s12633-018-9777-4 ↗
56. Investigation on performance of abrasive water jet in machining hybrid composites10.1080/10426914.2016.1198039 ↗
57. Studies on parametric optimization for abrasive water jet machining of Al7075-TiB2 in-situ composite10.1088/1757-899X/149/1/012024 ↗
58. Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis10.1016/j.measurement.2014.09.025 ↗
59. Investigation and optimization of machining parameters influence on surface roughness in turning AISI 4340 steel10.5937/fme2002383B ↗
60. Scheffé · 1999
61. Gamst · 2008
62. A grey-fuzzy approach for optimizing machining parameters and the approach angle in turning AISI 1045 steel
63. Optimization of energy conservation in air-conditioned system smart class room of a school building: approach to human comfort and energy management