journal article·2022-01Open access

Martensite reversion and strain hardening of a 2304 lean duplex stainless steel subjected to cold rolling and isochronous annealing at low temperatures

Renata Mangini Santos, Daniella Gomes Rodrigues, Maria Luiza Dias Santos, Dagoberto Brandão Santos

Abstract

Lean duplex stainless steels (LDSS) have a microstructure composed of ferrite and austenite phases. This microstructure provides good mechanical and corrosion resistances. The effects of cold rolling, leading to α′-martensite formation by strain-induced transformation and subsequent reversion annealing treatment were analyzed on the microstructural evolution and mechanical properties of an LDSS 2304. The steel was cold-rolled to a 60% reduction and annealed for 1800 s at 600, 700, 800, and 900 °C. The analysis of mechanical properties performed by tensile tests, along with microstructural analysis, allowed the characterization of each stage of strain hardening. The work hardening rate curves revealed well-defined stages involved in the steel deformation process, linked to the different mechanisms of plastic deformation of the microstructure. These results indicated that a transformation-induced plasticity, TRIP effect, occurred concurrently in the austenite after reversion at low annealing temperatures. The synergy and mutual competition from the coexistence of slipping and TRIP caused multiple-stage strain hardening. The shape of the strain-hardening curve for the selected annealing temperature range could be divided into two cases: a multiple-stage strain-hardening for the as-received and fully annealed sample (900 °C) to a characteristic three-stage strain-hardening from 600 to 800 °C annealing conditions. Microstructural observations revealed that the typical three-stage hardening was mainly related to strain-induced martensite formation and its reversion.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Duplex stainless steels: brief history and some recent alloys
2. About heat treatment and properties of Duplex Stainless Steels
3. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
4. Microstructural evolution during industrial rolling of a duplex stainless steel10.2355/isijinternational.48.1596 ↗
5. Development of a lean duplex stainless steel10.1002/srin.200806154 ↗
6. Influence of long-term ageing in solution containing chloride ions on the passivity and the corrosion resistance of duplex stainless steels10.1016/j.corsci.2010.11.011 ↗
7. Precipitation of secondary phases in lean duplex stainless steel 2101 during isothermal ageing10.2355/isijinternational.50.286 ↗
8. TRIP aided deformation of a near-ni-free, Mn–N bearing duplex stainless steel10.1016/j.msea.2011.12.037 ↗
9. Effect of annealing temperature on mechanical behavior, pitting resistance and grain boundary character of a 2304 lean duplex stainless steel10.1007/s11661-019-05193-1 ↗
10. Deformation and annealing behavior of nitrogen alloyed duplex stainless steels. Part II: Annealing10.2355/isijinternational.43.1788 ↗
11. Determination of stacking fault energy of austenite in a duplex stainless steel10.1002/srin.199605486 ↗
12. Effect of cold rolling reduction on texture, recrystallization, and mechanical properties of UNS S32304 Lean Duplex stainless steel
13. Strain-induced martensite and reverse transformation in 2304 lean duplex stainless steel and its influence on mechanical behavior10.1002/srin.201800437 ↗
14. Evolution of microstructure and mechanical properties in a cold deformed nitrogen bearing TRIP-assisted duplex stainless steel after reversion annealing10.1016/j.msea.2016.10.105 ↗
15. Effect of cold rolling on microstructure and magnetic properties in a metastable lean duplex stainless steel10.1007/s10853-010-4582-5 ↗
16. Microstructural and magnetic characterization of a lean duplex steel: strain-induced martensite formation and austenite reversion10.1016/j.jmmm.2020.167370 ↗
17. Deformation behavior of lean duplex stainless steels with strain induced martensitic transformation: role of deformation mechanisms, alloy chemistry and predeformation10.1016/j.mtla.2018.100190 ↗
18. Effect of austenitic texture on tensile behavior of lean duplex stainless steel with transformation induced plasticity (TRIP)10.1016/j.msea.2016.11.001 ↗
19. Strain hardening of cold-rolled lean-alloyed metastable ferritic-austenitic stainless steels10.1016/j.msea.2016.09.038 ↗
20. Influence of annealing temperature on the strain-hardening behavior of a lean duplex stainless steel10.1016/j.msea.2018.03.027 ↗
21. Effect of heat treatment on transformation-induced plasticity of economical Cr19 duplex stainless steel10.1016/j.matdes.2013.12.019 ↗
22. Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism10.1016/j.msea.2014.06.065 ↗
23. Influence of annealing temperature on deformation behavior of 329LA lean duplex stainless steel10.1016/j.msea.2016.10.062 ↗
24. Development of an Easy-Deformable Cr21 lean duplex stainless steel and the effect of heat treatment on its deformation mechanism10.1016/j.msea.2017.07.020 ↗
25. Enhancement of mechanical properties of a TRIP-aided austenitic stainless steel by controlled reversion annealing10.1016/j.msea.2015.01.042 ↗
26. Mechanisms of the reverse martensite-to-austenite transformation in a metastable austenitic stainless steel10.3390/met11040599 ↗
27. Reverse martensitic transformation and resulting microstructure in a cold rolled metastable austenitic stainless steel10.1002/srin.200806149 ↗
28. Effect of strain and strain rate on the development of deformation heterogeneity during tensile deformation of a solution annealed 304 LN austenitic stainless steel: an EBSD study10.1016/j.msea.2019.138854 ↗
29. The significance of texture parameters in phase analysis by X-ray diffraction10.1107/S0021889869006881 ↗
30. Effect of low cold-rolling strain on microstructure, texture, phase transformation and mechanical properties of 2304 lean duplex stainless steel10.1016/j.matchar.2019.02.011 ↗
31. Effect of warm rolling and annealing on microstructure, texture, and mechanical properties of a 2205 duplex stainless steel10.1002/srin.201900543 ↗
32. A mechanism for the strain-induced nucleation of martensitic transformations10.1016/0022-5088(72)90173-7 ↗
33. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels10.1016/j.actamat.2007.07.015 ↗
34. Nucleation and evolution of strain-induced martensitic (b.c.c.) embryos and substructure in stainless steel: a transmission electron microscope study10.1016/0001-6160(83)90103-7 ↗
35. Effect of pre-cold-working on diffusional reversion of deformation induced martensit in metastable austenitic stainless steel10.2355/isijinternational.34.522 ↗
36. Microstructure and texture evolution of duplex stainless steels with different molybdenum contents10.1016/j.matchar.2018.06.006 ↗
37. Texture and structure evolution during cold rolling of austenitic stainless steel
38. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
39. Effects of reversion and recrystallization on microstructure and mechanical properties of Nb-alloyed low-Ni high-Mn austenitic stainless steels10.1016/j.msea.2016.01.093 ↗
40. Effect of thermo-mechanical processing on texture evolution in austenitic stainless steel 316L10.1016/j.matchar.2014.10.006 ↗
41. Structure and texture evolution of the metastable austenitic steel during cold working10.1134/S0031918X20070066 ↗
42. Enhanced mechanical properties through reversion in metastable austenitic stainless steels10.1007/s11661-008-9723-y ↗
43. Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel10.1016/j.msea.2006.09.059 ↗
44. Strain induced martensite formation and its effect on strain hardening behavior in the cold drawn 304 austenitic stainless steels10.1016/S1359-6462(96)00338-7 ↗
45. Influence of temperature on mechanical properties, fracture morphology and strain hardening behaviour of a 304 stainless steel10.1590/1980-5373-mr-2016-0932 ↗
46. Martensite formation, strain rate sensitivity, and deformation behavior of type 304 stainless steel sheet10.1007/BF02647406 ↗
47. Processing and properties of reversion-treated austenitic stainless steels10.3390/met10020281 ↗
48. Development of TRIP-aided lean duplex stainless steel by twin-roll strip casting and its deformation mechanism10.1007/s11661-016-3771-5 ↗