Microstructural and interface geometrical influence on the mechanical fatigue property of aluminum/high-strength steel lap joints using resistance element welding for lightweight vehicles: experimental and computational investigation
Source abstract
Abstract
The present study investigates a fatigue property and its microstructural and interface geometrical effect on the resistance element welded (REWed) aluminum (Al)/high-strength steel (Fe) lap joint. The assembled Al/Fe joints were subjected under the fatigue strength up to 80% of tensile-shear loads with 0.1 of the load ratio. As a result, an exceptional fatigue strength has been secured inducing the base material fracture because there are no noticeable interfacial defects at the 10.5 kA welding condition compared to assemblies joined with 3.5–4.5 kA of welding currents. Even, maximum tensile-shear loads exceed 9 kN at the 10.5 kA welding condition. Microstructural developments of base materials and welding interfaces were thoroughly analyzed by an optical microscopy (OM) and electron backscatter diffraction (EBSD), the development of prior-austenite-grain-boundaries (PAGBs) and α'-martensite phases were observed in the welding interfaces at all conditions. Heat affected zone (HAZ) developments of AA5052 were quantitatively analyzed in terms of recrystallization and grain growth, providing significant differences in the fatigue performances and striation, crack propagation developments. In addition, with the help of a finite element (FE) computational modeling, a mechanical stress distribution and strain behavior by geometries of the joining interface are discussed in detail.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Mechanical degradation of magnetic pulse welded Al–Fe joint in neutral salt environment10.1016/j.jmrt.2021.09.078 ↗
2. Interfacial microstructure and mechanical properties of laser-welded 6061Al/AISI304 dissimilar lap joints via beam oscillation10.1016/j.jmrt.2020.10.064 ↗
3. Pinless FSSW of DP600/Zn/AA6061 dissimilar joints10.1016/j.jmrt.2021.08.071 ↗
4. Effect of mismatch in mechanical properties on interfacial strength of aluminum alloy/steel dissimilar joints10.1016/j.msea.2020.139437 ↗
5. Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel10.1016/j.jmatprotec.2008.11.017 ↗
6. Optimization of postweld tempering pulse parameters for maximum load bearing and failure energy absorption in dual phase (DP590) steel resistance spot welds10.1016/j.msea.2020.140713 ↗
7. Multi-scale mechanical modeling of Al-steel resistance spot welds10.1016/j.msea.2018.08.039 ↗
8. Effects of fusion zone size and failure mode on peak load and energy absorption of advanced high strength steel spot welds under lap shear loading conditions10.1016/j.engfailanal.2007.01.018 ↗
9. Microstructure and mechanical properties of Al/steel dissimilar welds fabricated by friction surfacing assisted friction stir lap welding10.1016/j.jmrt.2019.10.046 ↗
10. Schedule and electrode design for resistance spot weld bonding Al to steels10.1016/j.jmatprotec.2018.10.011 ↗
11. Self-pierce riveting of multiple steel and aluminium alloy sheets10.1016/j.jmatprotec.2013.09.007 ↗
12. Experimental and numerical investigations of aluminium–steel self-piercing riveted joints under quasi-static and dynamic loadings10.1016/j.tws.2021.108277 ↗
13. High-productivity and high-strength Fe/Al dissimilar metal joining by spot forge welding10.1016/j.matlet.2020.128412 ↗
14. Effects of Si contents in filling wires on microstructure evolution and properties of Al-steel dissimilar joint by laser welding-brazing10.1016/j.jmrt.2021.09.053 ↗
15. Effects of process parameters on mechanical performance and interfacial morphology of electromagnetic pulse welded joints between aluminum and galvanized steel10.1016/j.jmrt.2020.12.047 ↗
16. Electrically assisted solid state lap joining of dissimilar steel S45C and aluminum 6061-T6 alloy10.1016/j.jmrt.2021.02.091 ↗
17. Microstructure evolution of AA5052 joint failure process and mechanical performance after reconditioning with tubular rivet10.1016/S1003-6326(21)65736-9 ↗
18. Aluminum-steel dissimilar robotic arc spot welding with auxiliary insert10.1007/s40194-019-00795-0 ↗
19. Effect of post-weld tempering pulse on microstructure and mechanical properties of resistance spot welding of Q&P1180 steel
20. Joining lightweight components by short-time resistance spot welding10.1007/s40194-016-0398-5 ↗
21. Interface microstructure and tensile properties of a third generation aluminium-steel butt weld produced using the Hybrid Metal Extrusion & Bonding (HYB) process
22. Fracture mechanisms of Al/steel resistance spot welds in coach peel and cross tension testing10.1016/j.jmatprotec.2017.09.035 ↗
23. Effect of axial magnetic field on TIG welding-brazing of AA6061 aluminum alloy to HSLA350 steel10.1016/j.jmrt.2021.03.039 ↗
24. Fatigue life assessment of Al-steel resistance spot welds using the maximum principal strain approach considering material inhomogeneity10.1016/j.ijfatigue.2020.105851 ↗
25. Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets10.1016/j.msea.2017.03.023 ↗
26. Innovative and highly productive joining technologies for multi-material lightweight car body structures10.1007/s11665-014-0962-3 ↗
27. Microstructure, mechanical properties, and damping capacity in stir zone after friction stir welding of Fe–17Mn damping alloy10.1016/j.jallcom.2019.06.367 ↗
28. Robust bonding and microstructure behavior of aluminum/high-strength steel lap joints using resistance element welding process for lightweight vehicles: experimental and numerical investigation
29. Effect of vacuum pressure on small crack propagation in Ti-6Al-4V10.1016/j.ijfatigue.2020.105961 ↗
30. Design variables influencing the fatigue of Al 2024-T3 in riveted aircraft lap joints: squeeze force and initial fit tolerance10.1016/j.ijfatigue.2020.105751 ↗
31. Fatigue strength reduction factors at rivet holes for aircraft fuselage lap joints10.1016/j.ijfatigue.2015.06.025 ↗
32. Microstructures and fatigue behavior of metal-inert-gas-welded joints for extruded Al-Mg-Si alloy10.1016/j.msea.2018.12.080 ↗
33. Relationship between welding conditions, abnormal grain growth and mechanical performance in friction-stir welded 6061-T6 aluminum alloy10.1016/j.msea.2021.141409 ↗
34. Milella · 2005 · vol. 42
35. Control of cementite precipitation in lath martensite by rapid heating and tempering10.2355/isijinternational.44.1937 ↗
36. Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel10.1007/s11661-002-0378-9 ↗
37. Critical assessment: martensite-start temperature for the γ → ε transformation
38. Phase transformation from fine-grained austenite10.2355/isijinternational.48.1038 ↗
39. Effect of austenite grain size on the mechanical properties in air-cooled 0.1c-5Mn martensitic steel10.4028/www.scientific.net/MSF.783-786.1027 ↗
40. Comments on the microstructure and properties of ultrafine grained steel10.2355/isijinternational.48.1063 ↗
41. Austenite grain size and the martensite-start temperature10.1016/j.scriptamat.2008.11.043 ↗
42. Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels10.1016/j.actamat.2014.09.017 ↗
43. Fatigue assessment of welded thin sheets with the notch stress approach – proposal for recommendations10.1016/j.ijfatigue.2020.105844 ↗
44. Stress concentration factor analysis for notched welded tubular T-joints10.1016/j.ijfatigue.2006.10.030 ↗
45. Re-evaluation of weld root fatigue strength for load-carrying fillet welded joints using the notch stress concept10.1016/j.ijfatigue.2020.106076 ↗
46. Grain size dependence of fatigue properties of friction stir processed ultrafine-grained Al-5024 alloy10.1016/j.ijfatigue.2017.12.007 ↗