journal article·2022-05Open access

Deformation behavior and softening mechanism in ferrite steel during warm deformation

Leilei Li, Huibin Wu, Chaohai Guo, Yuhui Feng

Abstract

Ferrite rolling is generally used to produce deep-drawn steel sheets, which can replace cold rolling to achieve short-flow production. Realizing low-cost production of deep-drawn steel. However, the deep-drawn performance of ferrite rolling products is not as good as the deep-drawn performance of cold rolled products. Of which dynamic recrystallization microstructure have a great effect on the deep-drawn performance. In the present study, ferrite steel was compressed at different deformation parameters (including deformation temperatures and strain rates) in a thermo-mechanical testing system to simulate the deformation behavior during the ferrite regions. The flow behavior of the ferrite steel was studied, and processing maps of the ferrite steel were plotted. The relationship between the Zener-Hollomon parameter and the dynamic recrystallization mechanisms of the ferrite steel was studied in this paper. The microstructure evolution in the steel was characterized by optical microstructure, electron backscatter diffraction, and transmission electron microscopy. The results show that both dynamic recovery and dynamic recrystallization happened during deformation process. The main softening mechanism was dynamic recovery. Discontinuous dynamic recrystallization, continuous dynamic recrystallization and geometric dynamic recrystallization were found in ferrite steel. Meanwhile, it was found that a corresponding relationship between dynamic recrystallization mechanisms and ln Zener-Hollomon values. At high ln Zener-Hollomon value, the dynamic recrystallization mechanism was discontinuous dynamic recrystallization. At middle ln Zener-Hollomon value, the dynamic recrystallization mechanism was continuous dynamic recrystallization. At low ln Zener-Hollomon value, the dynamic recrystallization mechanism in addition to continuous dynamic recrystallization and geometric dynamic recrystallization.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Effects of annealing cooling rates on mechanical properties, microstructure and texture in continuous annealed IF steel10.1016/j.jallcom.2016.09.018 ↗
2. Effect of hot rolling conditions to produce deep drawing quality steels for continuous annealing process10.1016/j.jmatprotec.2005.04.097 ↗
3. Effect of P addition on texture evolution of Ti+V-bearing ultra-low carbon bake hardening steel10.1016/j.msea.2016.11.100 ↗
4. Effect of chromium and boron additions on the warm rolling behavior of low carbon steels10.2355/isijinternational.42.Suppl_S52 ↗
5. Evolution of recrystallization texture in a 0.78 wt.% Cr extra-low-carbon steel after warm and cold rolling10.1016/j.actamat.2011.04.027 ↗
6. Effect of continuous annealing temperature on microstructure and properties of ferritic rolled interstitial-free steel10.1007/s12613-018-1600-0 ↗
7. Microstructural and textural development in an extra low carbon steel during warm rolling10.1016/j.msea.2004.09.014 ↗
8. Role of in-grain shear bands in the nucleation of <111>//ND recrystallization textures in warm rolled steel10.2355/isijinternational.38.78 ↗
9. EBSD study of a hot deformed nickel-based superalloy10.1016/j.jallcom.2015.04.008 ↗
10. Dynamic recrystallization and its effect on microstructure and texture evolution in magnesium Alloys
11. Study on the dynamic recrystallization mechanisms of Inconel 740 superalloy during hot deformation10.1016/j.jallcom.2019.153325 ↗
12. Surface gradient microstructural characteristics and evolution mechanism of 2195 aluminum lithium alloy induced by laser shock peening10.1016/j.optlastec.2018.07.041 ↗
13. Hot deformation behavior and constitutive equation of TB8 titanium alloy with a lamellar structure of α phase
14. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
15. Humphreys · 2004 · 557
16. Dynamic and static softening behavior of a titanium added ultra-low carbon steel during hot and warm deformation10.1016/j.jmrt.2020.01.015 ↗
17. A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure10.1016/j.actamat.2016.12.045 ↗
18. Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel10.1016/j.scriptamat.2005.05.027 ↗
19. Effect of rolling temperature on deformation behavior and mechanical properties of Mg-8Li-1Al-0.6Y-0.6Ce alloy10.1016/j.jallcom.2020.154765 ↗
20. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy10.1016/j.matchar.2021.110976 ↗
21. Dynamic recrystallization mechanisms of 2195 aluminum alloy during medium/high temperature compression deformation10.1016/j.msea.2020.140650 ↗
22. Study on hot deformation characteristics of 12%Cr ultra-super-critical rotor steel using processing maps and Zener–Hollomon parameter10.1016/j.matchar.2009.10.001 ↗
23. The hot deformation behavior and 3D processing maps of 25Cr2Ni4MoV steel for a super-large nuclear-power rotor10.1016/j.jmapro.2020.09.062 ↗
24. Evaluation of the deformation behaviors and hot workability of a high-strength low-alloy steel10.1016/j.msea.2021.141031 ↗
25. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
26. Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel10.1016/j.matdes.2016.05.118 ↗
27. Hot deformation behavior of GH4945 superalloy using constitutive equation and processing map10.1016/S1006-706X(17)30094-8 ↗
28. New constitutive model for high-temperature deformation behavior of inconel 718 superalloy10.1016/j.matdes.2015.03.001 ↗
29. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
30. General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels10.1016/1359-6454(95)00151-0 ↗
31. Hot deformation behaviors of low-alloyed ultrahigh strength steel 30CrMnSiNi2A: microstructure evolution and constitutive modeling10.1016/j.mtcomm.2021.102009 ↗
32. Elucidation of deformation mechanisms and construction of processing maps for a Ti+Nb stabilized IF steel10.1016/j.msea.2020.139648 ↗
33. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
34. Processing maps for the Cu-Cr-Zr-Y alloy hot deformation behavior10.1016/j.msea.2016.03.033 ↗
35. Hot deformation characteristic and processing map of superaustenitic stainless steel S3265410.1016/j.msea.2014.01.027 ↗
36. Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950°C10.1016/j.msea.2004.08.049 ↗
37. The hot deformation behavior and processing map of Ti-47.5Al-Cr-Valloy10.1016/j.matdes.2015.07.027 ↗
38. Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation10.1016/j.matdes.2019.108181 ↗
39. The microstructural evolution of aluminum alloy 7055 manufactured by hot thermo-mechanical process10.1016/j.jallcom.2019.05.054 ↗