journal article·2022-05Open access

A high Fe-containing AlSi12 alloy fabricated by laser powder bed fusion

Xinhai Ai, Jianying Wang, Tao Wen, Feipeng Yang, Xixi Dong, Hailin Yang, Shouxun Ji

Abstract

The high Fe-containing AlSi12 alloy was processed by additive manufacturing of laser powder bed fusion (LPBF) to understand the features of microstructures and mechanical properties under as-fabricated condition. The Fe impurity was found to be beneficial for mechanical property enhancement in the LPBFed samples. The parameters including the combination of laser power of 200 W, scanning speed of 1110 mm/s, hatch spacing of 0.15 mm, layer thickness of 0.03 mm and laser volumetric energy density of 40 J/mm3 were optimized to achieve a high relative density of 99.7%. The as-LPBFed AlSi12FeMn alloy was featured by a high density of significantly refined spherical α-Al(Fe,Mn)Si phase (10–50 nm), which was coherent with the Al matrix. Meanwhile, the as-LPBFed AlSi12FeMn alloy can deliver superior mechanical properties including the yield strength of 305 MPa, the ultimate tensile strength of 485 MPa and the fracture strain of 6.1%. The improved mechanical properties are attributed to synergistic strengthening mechanisms, including solid solution strengthening, grain boundary strengthening and precipitation strengthening. Moreover, the formation of high-density stacking faults (SFs) and Lomer-Cottrell locks (LCs) in localized regions can also offer strengthening in the as-LPBFed AlSi12FeMn alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
2. Silicon carbide reinforced aluminium metal matrix nano composites-A review10.1016/j.matpr.2017.02.296 ↗
3. Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment10.1016/j.msea.2020.139497 ↗
4. Eutectic nucleation in Al–Si alloys10.1016/j.actamat.2004.05.043 ↗
5. As-cast morphology of iron-intermetallics in Al–Si foundry alloys10.1016/j.scriptamat.2005.06.028 ↗
6. Effect of Fe-content on fatigue crack initiation and propagation in a cast aluminum–silicon alloy (A356–T6)10.1016/S0921-5093(04)00964-5 ↗
7. Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys10.1016/j.mtcomm.2021.102055 ↗
8. Fast aging strengthening by hybrid precipitates in high pressure die-cast Al-Si-Cu-Mg-Zn alloy10.1016/j.matchar.2021.111312 ↗
9. Influence of pore characteristics and eutectic particles on the tensile properties of Al–Si–Mn–Mg high pressure die casting alloy10.1016/j.msea.2020.139280 ↗
10. Mechanical properties of equal channel angular pressed powder extrudates of a rapidly solidified hypereutectic Al-20wt% Si alloy10.1016/j.msea.2006.01.164 ↗
11. Property improvement in Al–Si alloys through rapid solidification processing10.1016/S0924-0136(97)00198-2 ↗
12. Melt superheating on the microstructure and mechanical properties of diecast Al-Mg-Si-Mn alloy10.1007/s12540-015-4215-2 ↗
13. Microstructural evolution and solidification behavior of Al-Mg-Si alloy in high-pressure die casting10.1007/s11661-013-1663-5 ↗
14. The dependence of the β-AlFeSi to α-Al(FeMn)Si transformation kinetics in Al–Mg–Si alloys on the alloying elements10.1016/j.msea.2004.09.073 ↗
15. Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified10.1016/j.msea.2020.140477 ↗
16. Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys10.1016/j.msea.2012.11.095 ↗
17. Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content10.1016/j.jallcom.2020.157937 ↗
18. A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
19. Formation of metastable cellular microstructures in selective laser melted alloys10.1016/j.jallcom.2016.12.209 ↗
20. Microstructure and strength of selectively laser melted AlSi10Mg10.1016/j.actamat.2016.07.012 ↗
21. 3D printing of Aluminium alloys: additive Manufacturing of Aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
22. High-fidelity modelling of selective laser melting copper alloy: laser reflection behavior and thermal-fluid dynamics10.1016/j.matdes.2021.109857 ↗
23. Effect of SLM process parameters on hardness and microstructure of stainless steel 316 material10.1016/j.matpr.2021.09.144 ↗
24. Research progress on selective laser melting (SLM) of magnesium alloys: a review10.1016/j.ijleo.2019.163842 ↗
25. Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects10.1016/j.mtadv.2020.100097 ↗
26. Inconel 625 lattice structures manufactured by selective laser melting (SLM): mechanical properties, deformation and failure modes10.1016/j.matdes.2018.06.010 ↗
27. The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy10.1016/j.msea.2014.01.012 ↗
28. Defining the tensile properties of Al-12Si parts produced by selective laser melting10.1016/j.actamat.2016.12.044 ↗
29. Effect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy
30. Additive manufacturing of a high strength Al-5Mg2Si-2Mg alloy: microstructure and mechanical properties10.1016/j.jmst.2021.02.048 ↗
31. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
32. Parameter optimization for Ti-47Al-2Cr-2Nb in selective laser melting based on geometric characteristics of single scan tracks10.1016/j.optlastec.2016.11.002 ↗
33. Austenite grain growth modelling in weld heat affected zone of Nb/Ti microalloyed linepipe steel10.1179/1743284713Y.0000000364 ↗
34. Strength and strain hardening of a selective laser melted AlSi10Mg alloy10.1016/j.scriptamat.2017.07.025 ↗
35. High as-cast strength die-cast AlSi9Cu2Mg alloy prepared by nanoparticle strengthening with industrially acceptable ductility10.1016/j.jallcom.2020.156873 ↗
36. Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing10.1016/j.matdes.2019.108205 ↗
37. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
38. High strength-ductility Co23Cr23Ni23Mn31 medium-entropy alloy achieved via defect engineering10.1016/j.msea.2020.139974 ↗
39. Stacking fault energies and slip in nanocrystalline metals10.1038/nmat1136 ↗
40. Segregation of solute atoms to stacking faults10.1143/JPSJ.17.322 ↗
41. High temperature thermal and mechanical stability of high-strength nanotwinned Al alloys10.1016/j.actamat.2018.11.011 ↗
42. Tensile properties of Al-12Si fabricated via selective laser melting (SLM) at different temperatures10.3390/technologies4040038 ↗
43. Severe plastic deformation as a processing tool for strengthening of additive manufactured alloys10.1016/j.jmapro.2021.05.070 ↗
44. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: effect of heat treatment10.1016/j.msea.2013.10.023 ↗
45. Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting10.1016/j.jmatprotec.2015.02.023 ↗
46. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting10.1016/j.actamat.2016.06.009 ↗
47. Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting10.1016/j.jmst.2019.03.047 ↗
48. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
49. MPB characteristics and Si morphologies on mechanical properties and fracture behavior of SLM AlSi10Mg10.1016/j.msea.2021.141602 ↗
50. Selective laser melting of AlSi10Mg: influence of post-processing on the microstructural and tensile properties development10.1016/j.matdes.2016.05.066 ↗
51. Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy10.1016/j.msea.2020.140109 ↗
52. Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting10.1016/j.actamat.2019.06.013 ↗
53. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
54. Phase interface induced stacking faults in Al-7.5Y alloy revealed by in-situ synchrotron X-ray diffraction and ex-situ electron microscopy10.1016/j.matchar.2021.111322 ↗