journal article·2022-05Open access

Hot tensile deformation behaviors of TA32 titanium alloy based on back-propagation neural networks and three-dimensional thermal processing maps

Dao-chun Hu, Lei Wang, Ning Wang, Ming-he Chen, Hong-jun Wang

Abstract

The hot deformation behavior of TA32 titanium alloy in the temperature range of 650–850 °C and strain rate range of 0.0001–0.1 s−1 was studied by isothermal hot tensile tests conducted on an electronic universal testing machine equipped with an environmental chamber. The effects of temperature and strain rate on the flow stress of TA32 were investigated. Moreover, a back-propagation artificial neural network (BP-ANN) model was developed to predict the flow stress at elevated temperatures and three-dimensional (3-d) thermal processing maps. The results show that the three-layer BP-ANN model can precisely predict the flow stress as the correlation coefficient reaches 0.99365 and the mean relative error is 1.15621%. The 3-d thermal processing maps demonstrate that the lower strain rate, higher temperature, and larger strain lead to higher power dissipation efficiency and better formability. And it shows a flow instability tendency at lower temperatures and higher strain rates. Based on the 3-d thermal processing maps and microstructure analysis, the optimized temperature range and strain rate range for TA32 hot forming were 770–830 °C and 0.0001–0.00015 s−1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Research on superplastic behavior of TA32 titanium alloy plate
2. Microstructure and texture evolution of TA32 titanium alloy during superplastic deformation10.1016/j.msea.2017.05.082 ↗
3. Relationship among microstructure, mechanical properties and texture of TA32 titanium alloy sheets during hot tensile deformation10.1016/S1003-6326(20)65266-9 ↗
4. Flow behavior of TA32 titanium alloy at high temperature and its constitutive model
5. Study on rheological properties and microstructure evolution of TA32 titanium alloy under different thermoforming processes
6. Stress relaxation behavior and corresponding constitutive relation of TA32 titanium alloy at high temperature
7. Analysis and development of common constitutive models for hot deformation of titanium alloys
8. Research on hot deformation behavior of Zr-4 alloy based on PSO-BP artificial neural network10.1016/j.jallcom.2020.154047 ↗
9. Comparison of flow behaviors of near beta Ti-55511 alloy during hot compression based on SCA and BPANN models10.1016/S1003-6326(21)65606-6 ↗
10. Constitutive models and microstructure evolution of Ti-6Al-4V alloy during the hot compressive process10.1088/2053-1591/abdaf0 ↗
11. Property optimization of TRIP Ti alloys based on artificial neural network10.1016/j.jallcom.2021.161029 ↗
12. Modeling of hot deformation for microstructural control10.1179/imr.1998.43.6.243 ↗
13. Hot deformation behavior and process parameters optimization of Ti-6Al-7Nb alloy using constitutive modeling and 3D processing map10.1007/s42243-020-00531-9 ↗
14. Hot deformation behaviors of Ti-22Al-26Nb-2Ta alloy based on GA-LSSVM and 3D processing map10.1007/s12540-021-01016-4 ↗
15. Processing maps for hot working of titanium alloys
16. On the substitution of vanadium with iron in Ti-6Al-4V: thermo-Calc simulation and processing map considerations for design of low-cost alloys10.1016/j.msea.2020.139622 ↗
17. Hot working behavior of near alpha titanium alloy analyzed by mechanical testing and processing map10.1016/S1003-6326(20)65319-5 ↗
18. Study on the hot deformation behavior of Ti-22Al-26Nb-2Ta-0.5Y alloy based on BP neural network and 3D processing map
19. Wang
20. A comparative study on artificial neural network, phenomenological-based constitutive and modified fields-backofen models to predict flow stress in Ti-4Al-3V-2Mo-2Fe alloy10.1007/s11665-019-04174-0 ↗
21. Effect of test temperature on tensile behavior of Ti-5Al-5V-2Mo-1Cr-1Fe(α+β) Titanium alloy with initial microstructures in hot forged and heat treated conditions10.1007/s11661-019-05207-y ↗
22. Construction of constitutive model and strain-rate sensitivity coefficient distribution map of Ti2AlNb10.1007/s12540-020-00645-5 ↗
23. Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region10.1016/j.jallcom.2021.159534 ↗
24. The isothermal oxidation behavior of TA32 titanium alloy at elevated temperature
25. Physical model and 3D thermal processing map of hot deformation of 20CrMnTiH steel
26. Hot deformation behavior of X12 alloy based on three-dimensional hot working diagram
27. Using high temperature tensile testing data to analyze hot formability of Sn-5Sb alloy: instability and critical damage criteria10.1016/j.jmrt.2020.02.043 ↗
28. Tensile deformation behavior of a near-α titanium alloy Ti-6Al-2Zr-1Mo-1V under a wide temperature range10.1016/j.jmrt.2020.01.016 ↗
29. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti-6Cr-5Mo-5V-4Al in single phase region10.1016/j.msea.2021.141231 ↗
30. Analysis of crystallographic slip and grain boundary sliding in a Ti–45Al–2Nb–2Mn (at%)–0.8 vol% TiB2 alloy by high temperature in situ mechanical testing10.1016/j.msea.2014.03.078 ↗
31. Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation10.1016/j.matchar.2021.111332 ↗
32. Separation of dynamic recrystallization parameter domains from a chaotic system for Ti-6Al-4V alloy and its application in parameter loading path design10.1016/j.msea.2019.138745 ↗