Thermal decomposition and kinetic investigation of AP and AP based composite solid propellant in the presence of nickel ferrite additive
Source abstract
Abstract
Nanosize nickel ferrite (NiF) with an average crystalline size of 28.6 nm has been successfully synthesized via the co-precipitation method. NiF was found to efficiently reduce the thermal decomposition of ammonium perchlorate (AP) and Composite solid propellants (CSPs) along with an increment in the burning rate of CSPs by 1.6 times. The high-temperature DSC exothermic decomposition peak of AP was decreased by 59.04 °C in the presence of 1% by weight NiF additive. Differential Scanning Calorimeter (DSC) exothermic peak of CSPs based on AP + NiF was decreased by 37.72 °C as compared to that of CSPs based on pure AP. Further, the kinetics parameters of AP and AP + NiF mixture were evaluated using iso-conversional methods. The results indicated that the activation energy the of AP + NiF mixture was increased despite reduction in the thermal decomposition temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Thermal and Kinetic Analysis · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Catalytic effect of green CuO nanoparticles on the thermal decomposition kinetics of ammonium perchlorate10.1002/zaac.202000295 ↗
2. Recent advances in catalytic combustion of AP-based composite solid propellants10.1016/j.dt.2020.06.007 ↗
3. Solid propellants: AP/HTPB composite propellants10.1016/j.arabjc.2014.12.033 ↗
4. Laminated ammonium perchlorate-based composite prepared by ice-template freezing-induced assembly10.1007/s10853-020-05174-5 ↗
5. Burning characteristics and thermochemical behavior of AP/HTPB composite propellant using coarse and fine AP particles10.1002/prep.200900088 ↗
6. Three-dimensional nickel foam templated MgCo2O4 nanowires as an efficient catalyst for the thermal decomposition of ammonium perchlorate10.1016/j.jssc.2020.121426 ↗
7. Catalytic activities of two different morphological Co3O4 on the thermal decomposition of ammonium perchlorate10.1088/2053-1591/ab27af ↗
8. NiCoZn Ferrite: burn rate enhancer for AP/HTPB based propellant and its catalytic study on the decomposition of ammonium perchlorate
9. Catalytic action of nano Bi2WO6 on thermal decompositions of AP, RDX, HMX and combustion of NG/NC propellant10.1039/C5RA13257F ↗
10. A review on the use of nanometals as catalysts for the thermal decomposition of ammonium perchlorate10.1016/j.jscs.2011.05.009 ↗
11. Investigating catalytic properties of nanoferrites for both AP and nano-AP based composite solid propellant10.1080/00102202.2020.1734582 ↗
12. Thermal decomposition of ammonium perchlorate over perovskite catalysts: catalytic decomposition behavior, mechanism and application10.1016/j.apsusc.2020.145849 ↗
13. Catalytic activity of ferrates (NiFe2O4, ZnFe2O4 and CoFe2O4) on the thermal decomposition of ammonium perchlorate10.1002/prep.201900211 ↗
14. Catalytic effect of solvothermally prepared Cu2(bdc)2(bpy) metal-organic framework on thermal decomposition of ammonium perchlorate10.1016/j.jssc.2020.121940 ↗
15. Cu-MOF derived Cu/Cu2O/C nanocomposites for the efficient thermal decomposition of ammonium perchlorate10.1016/j.jssc.2021.122060 ↗
16. Investigation of kinetic parameters for ammonium perchlorate thermal decomposition in presence of gCN/CuO by TG-MS analysis and kinetic compensation correction10.1016/j.jssc.2021.122301 ↗
17. Magnetically retrievable ferrite nanoparticles in the catalysis application10.1016/j.cis.2019.07.003 ↗
18. Mini-review: ferrite nanoparticles in the catalysis10.1016/j.arabjc.2014.10.049 ↗
19. Superb catalytic activity of as-green synthesized copper ferrite's thermal decomposition of ammonium perchlorate10.1016/j.molstruc.2021.130161 ↗
20. Preparation of copper ferrite by sol–gel method and the synergistic catalytic for the thermal decomposition of ammonium perchlorate10.1007/s10971-021-05509-x ↗
21. Synthesis of CuNiF and CoMnF nano ferrites by sol-gel combustion method and their catalytic influence on thermal decomposition behavior of ammonium perchlorate nanoparticles
22. Bimetallic nanoalloys: preparation, characterization and their catalytic activity10.1016/j.jallcom.2009.02.024 ↗
23. Bimetallic nickel-ferrite nanorod particles: greener synthesis using rosemary and its biomedical efficiency10.1080/21691401.2019.1699830 ↗
24. Particle size determination from X-ray line broadening10.1063/1.1707771 ↗
25. Morphology-dependent catalytic activity of Fe2O3 and its graphene-based nanocomposites on the thermal decomposition of AP10.1016/j.fpc.2021.02.002 ↗
26. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
27. Modified iron oxide nanoparticles as burn rate enhancer in composite solid propellants10.1016/j.vacuum.2018.08.013 ↗
28. Investigation of energy band gap and conduction mechanism of magnesium substituted nickel ferrite nanoparticles
29. Band-gap engineering, conduction and valence band positions of thermally evaporated amorphous Ge15−xSbxSe50Te35 thin films: influences of Sb upon some optical characterizations and physical parameters10.1016/j.jallcom.2019.05.252 ↗
30. Impact of crystallites on enhancement of bandgap of Mn1−xZnxFe2O4 (1 ≥ x ≥ 0) nanospinels10.1016/j.cplett.2020.137240 ↗
31. Synthesis, structural, optical, morphological and magnetic characterization of copper substituted nickel ferrite (CuxNi1−xFe2O4) through co-precipitation method10.1007/s10854-017-7795-4 ↗
32. Pressure-induced amorphization of diisopropylammonium perchlorate studied by Raman spectroscopy and X-ray diffraction10.1021/acs.jpca.9b11325 ↗
33. Exploration of the energetic material ammonium perchlorate at high pressures: combined Raman spectroscopy and X-ray diffraction study10.1021/acs.jpcc.8b05046 ↗
34. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data10.1016/j.tca.2011.03.034 ↗
35. Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic10.1002/polc.5070060121 ↗
36. Is the friedman method applicable to transformations with temperature dependent reaction heat?10.1002/macp.200700100 ↗
37. A new method of analyzing thermogravimetric data10.1246/bcsj.38.1881 ↗
38. The ‘temperature integral’—its use and abuse10.1016/S0040-6031(97)00046-4 ↗
39. A quick, direct method for the determination of activation energy from thermogravimetric data10.1002/pol.1966.110040504 ↗
40. Variation of peak temperature with heating rate in differential thermal analysis10.6028/jres.057.026 ↗
41. Method of determining activation deterioration constant of electrical insulating materials
42. The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods10.1016/S0040-6031(03)00144-8 ↗
43. New approximate formula for Arrhenius temperature integral10.1016/S0040-6031(03)00310-1 ↗
44. Nonisothermal kinetic study: IV. Comparative methods to evaluate Ea for thermal decomposition of KZn2(PO4)(HPO4) synthesized by a simple route10.1021/ie300774x ↗
45. A simple and linear isoconversional method to determine the pre-exponential factors and the mathematical reaction mechanism functions10.1007/s10973-016-5962-0 ↗
46. Thermal decomposition of ammonium perchlorate10.1016/j.tca.2005.11.038 ↗
47. Gaseous products evolution analyses for catalytic decomposition of AP by graphene-based additives10.3390/nano9050801 ↗