Study on the microstructure and properties of WC-12Co cemented carbide fabricated by selective laser melting
Source abstract
Abstract
In this study, WC-12Co cemented carbides were fabricated by selective laser melting (SLM) and subsequently subjected to sintering. Effects of the scanning speed on the microstructure, mechanical properties and friction and wear performance of the prepared WC-12Co cemented carbides were investigated. Based on the XRD spectra, η phase appeared after the SLM process, confirming a loss of carbon during the preparation of WC-12Co. The WC average grain size increased with improving the scanning speed, which fluctuated in the range of 1.5 μm–2.5 μm. The relatively small WC average grain size was associated with the lamellar structure (alternating layers of coarse and fine WC grains) caused by the uneven temperature distribution of SLM. Co evaporation was quantitatively revealed by EBSD phase maps. Relationships between hardness, transverse rupture strength (TRS) and scanning speeds were analyzed. The comprehensive performance of the samples reached the best at the scanning speed of 400 mm/s, which the hardness, TRS was 81 HRA, and 650 MPa, respectively. Furthermore, after process optimization, the friction and wear properties of the material were tested, the friction coefficient was about 0.2 at room temperature, while 0.5–0.7 at 200°C–600°C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Diamond-reinforced cutting tools using laser-based additive manufacturing
2. Effects of carbon content on microstructure and properties of WC–20Co cemented carbides10.1016/j.ijrmhm.2013.09.010 ↗
3. Additive manufacturing of WC-20Co components by 3D gel-printing10.1016/j.ijrmhm.2017.10.005 ↗
4. Inhibitive effect of L-OH on the corrosion of austenitic chromium-nickel steel in H2SO4 solution10.1142/S0218625X08011561 ↗
5. Effect of Thyme extract as an ecofriendly inhibitor for corrosion of mild steel in acidic media10.1002/maco.202112769 ↗
6. Effect of cobalt content on the microstructure and mechanical properties of coarse grained WC-Co cemented carbides fabricated from chemically coated composite powder10.1016/j.jallcom.2018.06.366 ↗
7. Material extrusion-based three-dimensional printing of WC–Co alloy with a paste prepared by powder coating
8. Effect of sintering temperature on the mechanical and physical properties of WC–10% Co through micro-powder injection molding (μPIM)10.1016/j.ceramint.2012.11.039 ↗
9. Vacuum sintering of WC–8 wt.% Co hardmetals from WC powders with different dispersity10.1016/j.ijrmhm.2010.10.010 ↗
10. The grain growth and boundary evolution of extra-coarse-grained cemented carbides by pressureless sintering of ball-milling-mixed WC with Co at different temperature10.1016/j.matchar.2021.111386 ↗
11. Development of the structure of cemented carbides during their processing by SLM and HIP10.3390/met10111477 ↗
12. Processability of atypical WC-Co composite feedstock by laser powder-bed fusion10.3390/ma13010050 ↗
13. Assessment of usability of WC-Co powder mixtures for SLM10.21062/ujep/166.2018/a/1213-2489/MT/18/5/719 ↗
14. Microstructure and mechanical properties of selective laser melted 18Ni-300 steel10.1016/j.phpro.2011.03.033 ↗
15. A comparative investigation on the microstructure and mechanical properties of additively manufactured aluminum alloys10.1016/j.ijfatigue.2021.106165 ↗
16. The formation mechanism of TiC reinforcement and improved tensile strength in additive manufactured Ti matrix nanocomposite10.1016/j.vacuum.2017.05.029 ↗
17. Structural uses of stainless steel—buildings and civil engineering10.1016/j.jcsr.2008.05.006 ↗
18. Laser-based additive manufacturing of WC–Co with high-temperature powder bed preheating10.1002/srin.201900511 ↗
19. Controlling WC/Co two-phase microstructure of cemented carbides additive-manufactured by laser powder bed fusion: effect of powder composition and post heat-treatment10.1016/j.matdes.2021.110034 ↗
20. Microstructure analysis of high density WC-Co composite prepared by one step selective laser melting10.1016/j.ijrmhm.2019.104980 ↗
21. Processability of WC-Co powder mixtures using SLM additive technology10.17973/MMSJ.2019_06_2018115 ↗
22. Possibilities of manufacturing products from cermet compositions using nanoscale powders by additive manufacturing methods10.3390/ma12203425 ↗
23. Influence of different substrates on the microstructure and mechanical properties of WC-12Co cemented carbide fabricated via laser melting deposition10.1016/j.ijrmhm.2022.105787 ↗
24. Investigations on heat regulation of additive manufacturing processes for metal structures10.1016/j.cirp.2011.03.109 ↗
25. Role of Co content on densifcation and microstructure of WC–Co cemented carbides prepared by selective laser melting10.1007/s40195-021-01195-4 ↗
26. Carroll A, Carey R, Hurst M, Liu M, Kuttolamadom M. Characterization of high-density WC-Co bulk structures fabricated by selective laser melting. In: The American Society of Mechanical Engineers, organizer. International Manufacturing Science and Engineering Conference; 2020 Jun 22-26; Cincinnati, USA. p. 1-9. https://doi.org/10.1115/MSEC2020-8384.10.1115/MSEC2020-8384 ↗
27. Correlation between microstructural heterogeneity and mechanical properties of WC-Co composite additively manufactured by selective laser melting10.1016/j.matlet.2021.129683 ↗
28. Structural modifications of WC/Co nanophased and conventional powders processed by selective laser melting10.1080/10426914.2016.1176195 ↗
29. Phase composition and microstructure of WC–Co alloys obtained by selective laser melting
30. Effects of Y2O3 addition on microstructures and mechanical properties of WC–Co functionally graded cemented carbides10.1016/j.ijrmhm.2014.11.004 ↗
31. Investigations on residual stresses and deformations in selective laser melting10.1007/s11740-009-0192-y ↗
32. Additive manufacturing of WC-Co hardmetals: a review10.1007/s00170-020-05389-5 ↗
33. Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting10.1016/j.msea.2010.08.075 ↗
34. The effects of fine WC contents and temperature on the microstructure and mechanical properties of inhomogeneous WC-(fine WC-Co) cemented carbides10.1016/j.ceramint.2016.08.119 ↗
35. Preparation and performance of ultrafine grained WC-10Co alloys with added La2O310.1016/j.ceramint.2018.11.071 ↗
36. Effects of NbC additions on the microstructure and properties of non-uniform structure WC-Co cemented carbides10.1016/j.msea.2017.01.077 ↗
37. Effects of Ni and Cu additions on microstructures, mechanical properties and wear resistances of ultra-coarse grained WC–6Co cemented carbides10.1016/j.ijrmhm.2017.10.009 ↗
38. Influence of NbC and VC on microstructures and mechanical properties of WC–Co functionally graded cemented carbides10.1016/j.matdes.2015.10.156 ↗
39. Impact of cobalt content and grain growth inhibitors in laser-based powder bed fusion of WC-Co10.1016/j.ijrmhm.2022.105814 ↗
40. Effect of Co content on microstructure and mechanical properties of ultrafine grained WC-Co cemented carbide sintered by spark plasma sintering10.1016/j.ceramint.2018.07.100 ↗
41. Friction and wear behaviour of cemented carbide tool materials sliding against Al2O3 and Si3N4 ceramics under dry condition10.1016/j.ceramint.2018.06.218 ↗
42. Effect of ultrafine WC contents on the microstructures, mechanical properties and wear resistances of regenerated coarse grained WC-10Co cemented carbides10.1016/j.ijrmhm.2021.105516 ↗
43. Friction and wear behaviors of WC/Co cemented carbide tool materials with different WC grain sizes at temperatures up to 600°C10.1016/j.ijrmhm.2011.11.003 ↗