journal article·2022-11Open access

Numerical modeling for the mechanism of shoulder and pin features affecting thermal and material flow behavior in friction stir welding

Hua Ji, Yun Lai Deng, Hong Yong Xu, Xiaoxi Yin, Teng Zhang, Wen Quan Wang, Hong Gang Dong, Tian Yu Wang, Jin Peng Wu

Abstract

A three-dimensional transient computational fluid dynamics model is developed to analyze the influence of rotational/non-rotational shoulder and pin characteristics on the thermal and material flow behavior in friction stir welded (FSW) aluminum alloy joints. Four tool designs with rotational/non-rotational shoulder and the pin with/without triple facets are considered. The heat cycle of the rotational and non-rotational shoulder friction stir welded joint (RS-FSW and NRS-FSW) is simulated and experimentally verified, and the welding temperature fields are analyzed. The welding peak temperature of the RS-FSWed joint is the highest, and the non-rotational shoulder significantly reduces the welding peak temperature and the range of the heat-affected zone (HAZ). The rotational shoulder promotes material flow and enhances flow velocity, whereas the non-rotational shoulder reduces both. An increase in the triple facets on the pin facilitates the material flow during NRS-FSW. Viscosity is a physical quantity associated with the welding temperature and strain rate, which is affected by the tool characteristics. The deformation zone caused by the tool is related to the viscosity of the material, the closer the tool, the lower the viscosity of the material. The viscosity of the material gradually increases with an increase in the distance from the tool surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Friction stir welding of aluminium alloys
2. The potential adaptation of stationary shoulder friction stir welding technology to steel10.1016/j.matdes.2014.08.017 ↗
3. Three-dimensional heat and material flow during friction stir welding of mild steel10.1016/j.actamat.2006.09.009 ↗
4. A study of texture patterns in friction stir welds10.1016/j.actamat.2007.11.016 ↗
5. Recrystallization mechanisms during friction stir welding/processing of aluminum alloys10.1016/j.scriptamat.2007.09.064 ↗
6. Numerical modeling for the effect of pin profiles on thermal and material flow characteristics in friction stir welding10.1016/j.matdes.2015.04.012 ↗
7. A comparative study of material flow behavior in friction stir welding using laminar and turbulent models10.1007/s11665-015-1520-3 ↗
8. 3D modeling of material flow in friction stir welding under different process parameters10.1016/j.jmatprotec.2006.09.027 ↗
9. Tool geometry for friction stir welding—optimum shoulder diameter[J]10.1007/s11661-011-0672-5 ↗
10. Toward optimum friction stir welding tool shoulder diameter10.1016/j.scriptamat.2010.08.052 ↗
11. CFD modelling of friction stir welding of thick plate 7449 aluminium alloy10.1179/174329306X107700 ↗
12. 3 Dimensional CFD modelling of flow round a threaded friction stir welding tool profile10.1016/j.jmatprotec.2005.03.015 ↗
13. Influence of tool thread pitch on material flow and thermal process in friction stir welding10.1016/j.jmatprotec.2019.116281 ↗
14. Effects of pin thread on the in-process material flow behavior during friction stir welding: a computational fluid dynamics study10.1016/j.ijmachtools.2017.09.002 ↗
15. Steady state thermomechanical modelling of friction stir welding10.1179/174329306X102093 ↗
16. Two-dimensional CFD modelling of flow round profiled FSW tooling10.1179/136217104225021832 ↗
17. Computational fluid dynamics studies on heat generation during friction stir welding of aluminum alloy10.1016/j.commatsci.2013.07.004 ↗
18. Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys
19. Numerical modeling of friction stir welding process: a literature review10.1007/s00170-012-4154-8 ↗
20. Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments10.1016/j.scriptamat.2008.08.015 ↗
21. Monitoring torque and traverse force in friction stir welding from input electrical signatures of driving motors10.1179/1362171812Y.0000000084 ↗
22. Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding10.1007/s11661-006-1076-9 ↗
23. Modelling heat flow around tool probe in friction stir welding10.1179/174329305X36070 ↗
24. Recent advances in friction-stir welding – process, weldment structure and properties10.1016/j.pmatsci.2008.05.001 ↗
25. Thermal energy generation and distribution in friction stir welding of aluminum alloys10.1016/j.energy.2014.09.045 ↗
26. Stationary shoulder FSW for joining high strength aluminum alloys10.1016/j.jmatprotec.2015.02.015 ↗
27. Prediction of fatigue life of welding tool in friction stir welding of AA6061-T610.1007/s00170-016-8475-x ↗
28. Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds10.1016/j.jmatprotec.2016.11.015 ↗
29. A numerical model of pin thread effect on material flow and heat generation in shear layer during friction stir welding10.1016/j.jmapro.2018.09.021 ↗