journal article·2023-01Open access

Understanding the bending behavior and through-thickness strain distribution during asymmetrical rolling of high-strength aluminium alloy plates

Hui Su, Longgang Hou, Qingkun Tian, Yawen Wang, Linzhong Zhuang

Abstract

The asymmetric rolling (ASR) process is highly desired to improve the through-thickness deformation/strain uniformity by introducing additional shear strains for uniform through-thickness microstructures and mechanical properties of metallic/alloy plates. In this study, the bending behavior and mechanism during the ASR processing of high-strength AA7050 aluminium alloy plates were simulated along with rolling trials. It shows that the plate will bend upward (toward slower roll) at larger speed ratios and smaller thickness reductions but downward (toward faster roll) at smaller speed ratios and larger thickness reductions. The ASR processing can increase the central equivalent plastic strains and decrease the surface-to-center strain gradient compared with that caused by the conventional symmetric rolling. The high strain rate bands (HSRBs) as key plastic strain accumulation regions are intimately connected with the post-rolling equivalent plastic strain distribution and the outgoing curvature. Especially, when the HSRB approaches the plate upper surface near the end of the deformation zone, normally at larger thickness reductions, a downward bending occurs despite that the lower roll rotates faster, and vice versa. The through-thickness HSRB induced by the ASR processing is considered to mainly enhancing the equivalent plastic strain homogeneity. The formation and interactive mechanisms of the HSRBs and their connection with the bending behavior during the ASR processing were discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Electromagnetic Effects on Materials · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Influence of asymmetric hot rolling on through-thickness microstructure gradient of Fe-20Mn-4Al-0.3C non-magnetic steel10.1016/j.msea.2016.06.047 ↗
2. A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment10.1016/j.matchar.2018.09.029 ↗
3. Grain refinement of non-magnetic austenitic steels during asymmetrical hot rolling process10.1016/j.jmst.2017.06.002 ↗
4. A comparison between equal channel angular pressing and asymmetric rolling of silver in the severe plastic deformation regime10.1016/j.msea.2012.09.018 ↗
5. Development of severe plastic deformation by various asymmetric rolling processes10.1016/j.msea.2007.11.099 ↗
6. Finite element analysis of bending behavior and strain heterogeneity in snake rolling of AA7050 plates using a hyperbolic sine-type constitutive law10.1016/j.jmatprotec.2016.10.009 ↗
7. Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling10.1016/j.msea.2008.11.029 ↗
8. Mechanical and microstructural characteristics of polycrystalline copperrolled asymmetrically to a high deformation level10.1016/j.matchar.2018.12.017 ↗
9. Influence of shear deformation during asymmetric rolling on the microstructure, texture, and mechanical properties of the AZ31B magnesium alloy sheet10.1016/j.msea.2020.140306 ↗
10. Structural features and mechanical properties of AZ31 Mg alloy warm-deformed by differential speed rolling10.1016/j.jallcom.2018.02.095 ↗
11. Finite element analysis of severe deformation in Mg-3Al-1Zn sheets through differential-speed rolling with a high speed ratio10.1016/j.msea.2006.11.076 ↗
12. Bending behavior, and evolution of texture and microstructure during differential speed warm rolling of AZ31B magnesium alloys10.1016/j.actamat.2011.05.039 ↗
13. Non-conventional hot rolling for improvement of mechanical properties in binary Mg-alloys10.1016/j.mechmat.2021.104111 ↗
14. Effect of speed-ratio on microstructure and mechanical properties of Mg-3Al-1Zn alloy in differential speed rolling10.1016/j.jallcom.2011.05.063 ↗
15. Effect of deformation path on texture and tension properties of submicrocrystalline Al-Mg-Si alloy fabricated by differential speed rolling10.1016/j.matlet.2017.11.012 ↗
16. Microstructure and mechanical properties of AA6061 alloy deformed by differential speed rolling10.1016/j.matlet.2019.126870 ↗
17. Microstructure and texture evolution with relation to mechanical properties of compared symmetrically and asymmetrically cold rolled aluminum alloy10.3390/met10020156 ↗
18. Microstructure evolution and grain refinement in asymmetrically rolled aluminium10.1016/j.actamat.2014.05.034 ↗
19. Microstructure and mechanical properties of ultrafine grained 5052 Al alloy fabricated by multi-pass differential speed rolling10.1016/j.jmrt.2022.05.196 ↗
20. Microstructure stability and mechanical properties of ultrafine grained 5052 Al alloy fabricated by differential speed rolling10.1016/j.msea.2018.07.033 ↗
21. Microstructure and texture evolution of copper processed by differential speed rolling with various speed asymmetry coefficient10.1016/j.msea.2012.12.006 ↗
22. Asymmetric rolling of interstitial free steel sheets: microstructural evolution and mechanical properties10.1016/j.jmapro.2017.12.014 ↗
23. Twinning susceptibility of CrCoNi medium entropy alloy to cryogenic temperature during asymmetric rolling10.1016/j.jmrt.2022.08.045 ↗
24. Microstructure optimization of low-carbon steel using differential speed rolling deformation followed by annealing10.1016/j.matlet.2019.127154 ↗
25. Plastic deformation mechanism of ultra-fine-grained AA6063 processed by equal-channel angular pressing10.1016/j.actamat.2009.11.053 ↗
26. Microstructure evolution, lattice rotation retardation and grain orientation fragmentation in commercial purity aluminium deformed by high pressure torsion10.1016/j.jmrt.2020.04.056 ↗
27. Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel10.1016/j.actamat.2007.07.002 ↗
28. Accumulative roll-bonding of aluminum alloys and composites: an overview of properties and performance10.1016/j.jmrt.2022.06.175 ↗
29. A dimensional analysis of front-end bending in plate rolling applications10.1016/j.jmatprotec.2012.02.005 ↗
30. Front - end bending in plate rolling10.1034/j.1600-0692.2001.300510.x ↗
31. Analysis of the bending of the rolling material in asymmetrical sheet rolling10.1016/S0020-7403(98)00112-X ↗
32. Theoretical analysis of the asymmetric rolling of sheets on leader and finishing stands10.1016/S0924-0136(03)00069-4 ↗
33. FE Simulation of the influence of roll diameter difference on the plate curvature during hot plate rolling10.1002/srin.201800007 ↗
34. Investigations into the influence of asymmetric factors and rolling parameters on strip curvature during hot rolling10.1016/S0924-0136(02)00469-7 ↗
35. Asymmetrical sheet rolling analysis and evaluation of developed curvature10.1007/s00170-011-3697-4 ↗
36. Analysis on shear deformation for high manganese austenite steel during hot asymmetrical rolling process using finite element method10.1016/S1006-706X(15)30101-1 ↗
37. Shear banding behavior of AA2099 Al-Li alloy in asymmetrical rolling and its effect on recrystallization in subsequent annealing10.1016/j.matchar.2021.111155 ↗
38. Influence of strain path on the microstructure evolution and mechanical properties in AM31 magnesium alloy sheets processed by differential speed rolling10.1016/j.matdes.2012.07.052 ↗
39. Annealing texture in asymmetrically rolled Ni1.5FeCrCu0.5 high-entropy alloy10.1016/j.jmrt.2022.04.126 ↗
40. Effect of pass reduction on distribution of shear bands and mechanical properties of AZ31B alloy sheets prepared by online heating rolling10.1016/j.jmatprotec.2020.116611 ↗
41. Finite element analysis of deformation behavior in Al-2.2 wt. % Mg alloy subjected to differential speed rolling10.1007/s11665-015-1598-7 ↗
42. Influence of rolling route on microstructure and mechanical properties of AZ31 magnesium alloy during asymmetric reduction rolling10.1016/S1003-6326(18)64724-7 ↗
43. Study on asymmetrical cold rolling considered sticking friction10.1016/j.jmrt.2020.10.027 ↗
44. Relationship between frictional coefficient and frictional factor in asymmetrical sheet rolling10.1016/S0924-0136(98)00327-6 ↗
45. Study on the relationship between asymmetrical rolling deformation zone configuration and rolling parameters10.1016/j.ijmecsci.2020.105905 ↗
46. Process parameter influence on texture heterogeneityin asymmetric rolling of aluminium sheet alloys10.1007/s12289-016-1330-7 ↗
47. Effect of asymmetric rolling on the microstructure and mechanical properties of wrought 6061 aluminum
48. Influence of thickness reduction per pass on strain, microstructures and properties of 7050 Al alloy sheet processed by asymmetric rolling10.1016/j.msea.2015.10.059 ↗
49. Microstructure, texture and mechanical properties of AA1060 aluminum10.1016/j.matdes.2015.11.054 ↗
50. Comparison of methods for calculating the influence of asymmetry in strip and plate rolling10.1002/srin.200005720 ↗
51. Strip warpage behavior and mechanism in single roll driven rolling10.2355/isijinternational.ISIJINT-2016-188 ↗
52. Forming of band curvature in asymmetrical rolling process10.1016/j.jmatprotec.2004.04.224 ↗
53. Analysis of asymmetrical cold rolling with varying coefficients of friction10.1016/S0924-0136(02)00131-0 ↗
54. Analysis of asymmetrical sheet rolling by slab method10.1016/j.ijmecsci.2012.09.015 ↗
55. Unlocking deformation path in asymmetric rolling by texture simulation10.3390/ma13010101 ↗