journal article·2023-03Open access

A novel single-crystal L12-strengthened Co-rich high-entropy alloy with excellent high-temperature strength and antioxidant property

W.C. Xiao, S.F. Liu, Y.L. Zhao, J.J. Kai, X.J. Liu, T. Yang

Abstract

Severe intermediate-temperature embrittlement as well as rapid softening and oxidation at high temperatures are significant problems for high-entropy alloys (HEAs) in polycrystalline structures, which greatly limit their applications in modern industries. In this study, a novel Co-rich single-crystal high-entropy alloy (HEA), Co41Ni35Al11·5Ta2·5Cr4Ti6 (at.%), was innovatively developed. After isothermally aged at 1250 °C, this alloy exhibits an ultrahigh volume fraction of cuboidal L12-type nanoprecipitates (∼80%) which is higher than those of previous Co-based superalloys. More importantly, the present HEA shows excellent mechanical performance at both ambient and elevated temperatures, and no intermediate temperature embrittlement and rapid softening were observed. Noticeably, the yield strength can still maintain at ∼800 and ∼500 MPa when tested at 900 and 1000 °C, which are superior to other conventional single-crystal alloys. Moreover, extraordinary oxidation resistance can be achieved at the high temperature of 1000 °C due to the formation of a compact sandwich-structured oxide layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. The hotter the engine, the better10.1126/science.1179327 ↗
2. Achieving thermally stable nanoparticles in chemically complex alloys via controllable sluggish lattice diffusion10.1038/s41467-022-32620-6 ↗
3. L12-Strengthened Co-rich alloys for high-temperature structural applications: a critical review10.1002/adem.202100453 ↗
4. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
5. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
6. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
7. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
8. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
9. Xu · 2022 · 155
10. Sims · 1987
11. Reed · 2008
12. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
13. A novel L12-strengthened multicomponent Co-rich high-entropy alloy with both high γ'-solvus temperature and superior high-temperature strength10.1016/j.scriptamat.2021.113826 ↗
14. L12-strengthened multicomponent Co-Al-Nb-based alloys with high strength and matrix-confined stacking-fault-mediated plasticity10.1016/j.actamat.2022.117763 ↗
15. Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys10.1016/j.actamat.2020.02.059 ↗
16. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
17. Microstructure evolution and dynamic softening mechanisms during high-temperature deformation of a precipitate hardening Ni-based superalloy10.1016/j.vacuum.2018.06.068 ↗
18. Thermostatistical modelling of hot deformation in FCC metals10.1016/j.ijplas.2013.02.002 ↗
19. Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces10.1126/science.abb6830 ↗
20. Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy10.1016/j.actamat.2020.02.028 ↗
21. Partition behavior of alloying elements and phase transformation temperatures in Co-Al-W-base quaternary systems10.1016/j.intermet.2012.07.033 ↗
22. High-strength Co-Al-V-base superalloys strengthened by γ'-Co3(Al, V) with high solvus temperature10.1016/j.actamat.2019.03.013 ↗
23. Development of low-density γ/γ' Co-Al-Ta-based superalloys with high solvus temperature10.1016/j.actamat.2020.02.049 ↗
24. L12-strengthened cobalt-base superalloys10.1146/annurev-matsci-070214-021043 ↗
25. Phase equilibria in the Co-rich Co-Al-W-Ti quaternary system10.1016/j.intermet.2011.08.004 ↗
26. Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure10.1016/j.actamat.2018.09.049 ↗
27. Effects of Cr on the properties of multicomponent cobalt-based superalloys with ultra high γ' volume fraction10.1016/j.jallcom.2020.154790 ↗
28. A single-crystal Co-base superalloy strengthened by γ' precipitates: structure and mechanical properties10.1002/adem.201500088 ↗
29. Temperature dependence of deformation behavior in a Co-Al-W-base single crystal superalloy10.1016/j.msea.2014.09.074 ↗
30. Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ'-strengthened Co-base superalloys10.1016/j.corsci.2011.04.020 ↗
31. Effect of Ta additions on microstructure and mechanical properties of a single-crystal Co-Al-W-base alloy10.1016/j.matlet.2015.01.133 ↗
32. High-temperature CoNi-based superalloys strengthened by γ'-(Ni, Co)3(Cr, Al, Ti, X): the effect of refractory elements
33. On the prediction of the yield stress of unimodal and multimodal γ' Nickel-base superalloys10.1016/j.actamat.2015.07.048 ↗
34. Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys10.1016/j.actamat.2014.04.075 ↗
35. A model of the anomalous yield stress for (111) slip in L12 alloys10.1016/0079-6425(92)90005-R ↗
36. Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy10.1016/j.scriptamat.2021.113928 ↗
37. Flow stress anomalies in γ/γ' two-phase Co-Al-W-base alloys10.1016/j.scriptamat.2006.10.039 ↗
38. High-temperature strength and deformation of γ/γ' two-phase Co-Al-W-base alloys10.1016/j.actamat.2007.11.014 ↗
39. The oxidation of single-crystal nickel-based superalloys
40. On the oxidation of the third-generation single-crystal superalloy CMSX-1010.1007/s11661-005-0073-8 ↗
41. Oxidation behaviors and mechanical properties of L12-strengthened high-entropy alloys at 700 °C10.1016/j.corsci.2022.110499 ↗
42. On the preferential grain boundary oxidation of a Ni-Co-based superalloy10.1016/j.corsci.2022.110203 ↗
43. Hou · 2001 · 5
44. A study on the multiple stages of oxidation kinetics in a single crystal nickel-based superalloy10.1016/j.corsci.2021.109512 ↗
45. Oxidation behavior of the nickel-based superalloy DZ125 at 980 °C10.1007/s40195-017-0598-z ↗
46. Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications10.1016/j.actamat.2010.09.027 ↗
47. Effects of Al and Ta on the high temperature oxidation of Ni-based superalloys10.1016/j.corsci.2014.10.025 ↗
48. The oxidation of Co-20% Cr base alloys containing Nb or Ta10.1016/S0010-938X(75)80015-1 ↗