Influence of pulse energy on surface integrity of AZ31 magnesium alloy processed by femtosecond laser shock peening
Source abstract
Abstract
Compared with traditional laser shock peening by nanosecond pulse laser, femtosecond laser shock peening (FLSP) exhibits superior flexibility and efficiency since it can be carried out directly in air without any ablative or confinement layers. In this work, FLSP was successfully performed on AZ31 magnesium alloy sheet. The influence of pulse energy on surface morphology and roughness, microstructure, surface residual stress and hardness was investigated in details. The results show that varying the laser pulse energy could effectively improve the surface integrity of the material. Regular dents are produced at the material surface with relatively low pulse energies, and the regular dent morphology disappears gradually with increasing pulse energy, suggesting an increased surface roughness. Surface microhardness and residual compressive stress are increased significantly after FLSP. The surface microhardness increases from the untreated 58.13 HV to the maximum value of about 69.58 HV at 37 μJ, by an increase of 19.7%. At 73 μJ, the residual compressive stress rises to a maximum value of approximately 59.6 MPa from an untreated 16.3 MPa. Moreover, the nano-hardness near the surface at the cross section is 1.68 GPa at 37 μJ, with an increase of 46% compared to the untreated 1.14 GPa. Particularly, twins and grain refinement layers are observed near the surface after FLSP, also indicated by the XRD analysis. The plastic deformation and grain refinement with low pulse energies contribute to the surface strengthening while the thermal effect and surface oxidation with increasing pulse energy may inhibit the enhancement of surface integrity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Tendon Structure and Treatment · Healthcare and Venom Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Laser surface engineering of magnesium alloys: a review10.1007/s11837-012-0340-2 ↗
2. Laser shock processing and its effects on microstructure and properties of metal alloys: a review10.1016/S0142-1123(02)00022-1 ↗
3. Application of micro-electro-mechanical systems (MEMS) as sensors: a review10.20965/jrm.2020.p0281 ↗
4. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts10.1016/j.actamat.2017.01.050 ↗
5. Effect of laser shock peening without coating on fretting corrosion of copper contacts10.1016/j.apsusc.2020.145917 ↗
6. The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy10.1016/j.surfcoat.2018.02.009 ↗
7. Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening10.3390/ma7127925 ↗
8. Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy10.1016/j.apsusc.2018.06.176 ↗
9. Microstructure and residual stress modulation of 7075 aluminum alloy for improving fatigue performance by laser shock peening10.1016/j.ijmachtools.2022.103979 ↗
10. Effect of laser shock peening on microstructure and fatigue crack growth rate of AZ31B magnesium alloy10.1016/j.jallcom.2016.04.179 ↗
11. Effects of laser shock peening post-treatment on microstructure and corrosion resistance of phosphate conversion coatings10.1016/j.optlastec.2023.109289 ↗
12. Numerical modeling of laser shock peening with femtosecond laser pulses and comparisons to experiments10.1016/j.apsusc.2010.02.034 ↗
13. Investigation on femtosecond laser shock peening of commercially pure copper without ablative layer and confinement layer in air10.1016/j.optlastec.2022.108207 ↗
14. Femtosecond laser shock peening on the surface of NiTi shape memory alloy10.1016/j.procir.2020.09.071 ↗
15. Femtosecond laser peening of friction stir welded 7075-T73 aluminum alloys10.1016/j.jmatprotec.2018.06.022 ↗
16. Investigation on femto-second laser irradiation assisted shock peening of medium carbon (0.4% C) steel10.1016/j.apsusc.2015.12.058 ↗
17. The effects of the confining medium and protective layer during femtosecond laser shock peening10.1016/j.mfglet.2020.11.006 ↗
18. Melting of titanium by a shock wave generated by an intense femtosecond laser pulse10.1134/S0021364022100551 ↗
19. Comparison of surface integrity of GH4169 superalloy after high-energy, low-energy, and femtosecond laser shock peening10.1016/j.vacuum.2022.111740 ↗
20. Effective femtosecond laser shock peening on a Mg–3Gd alloy at low pulse energy 430 μJ of 1 kHz10.1016/j.jma.2019.05.005 ↗
21. Enabling high-performance surfaces of biodegradable magnesium alloys via femtosecond laser shock peening with ultralow pulse energy10.1021/acsabm.1c00826 ↗
22. Thermal effect of femtosecond laser polystyrene processing10.1016/j.optlastec.2019.04.033 ↗
23. Quantification of thermal energy deposited in silicon by multiple femtosecond laser pulses10.1364/OE.14.009261 ↗
24. Direct visualization of the complete evolution of femtosecond laser-induced surface structural dynamics of metals10.1038/lsa.2016.256 ↗
25. Laser peening of 420 martensitic stainless steel using ultrashort laser pulses10.1016/j.procir.2020.02.062 ↗
26. On femtosecond laser shock peening of stainless steel AISI 31610.1016/j.apsusc.2017.11.145 ↗
27. Effect of processing environment on laser-induced darkening evolution in magnesium alloy10.1016/j.optlaseng.2013.07.018 ↗
28. Wavelength dependence of picosecond laser-induced periodic surface structures on copper10.1016/j.apsusc.2017.02.068 ↗
29. Surface strengthening of stainless steels by nondestructive laser peening10.1016/j.matdes.2021.109754 ↗
30. Femtosecond laser-mediated anchoring of polymer layers on the surface of a biodegradable metal10.1016/j.jma.2020.12.003 ↗
31. Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel10.1016/S0921-5093(98)00889-2 ↗
32. Mold-free fs laser shock micro forming and its plastic deformation mechanism10.1016/j.optlaseng.2014.11.002 ↗
33. Simultaneous grain refinement and nanoscale spinodal decomposition of β phase in Ti-Nb-Ta-Zr alloy induced by ultrasonic mechanical impacts10.1016/j.jallcom.2017.12.049 ↗
34. Effects of constrained groove pressing and temperature-assisted ultrasonic shot peening on microstructure and mechanical properties of a two-phase Mg–Li alloy10.1016/j.jmrt.2023.01.089 ↗
35. Effect of laser shock peening on the corrosion properties of Ti-6Al-3Nb-2Zr-1Mo alloy10.1016/j.surfcoat.2022.128425 ↗
36. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel10.1016/j.msea.2011.03.041 ↗
37. Effects of laser shock processing on mechanical properties of AZ91 magnesium alloy
38. Enhancement mechanism of femtosecond double-pulse laser-induced Cu plasma spectroscopy10.1016/j.optlastec.2017.05.010 ↗
39. On-line evaluation and monitoring technology for material surface integrity in laser shock peening – a review10.1016/j.jmatprotec.2022.117851 ↗
40. Comparison of mechanical and corrosion properties of 7050 aluminum alloy after different laser shock peening10.1016/j.optlastec.2022.108061 ↗
41. Mechanisms of femtosecond laser ablation of Ni3Al: molecular dynamics study10.1016/j.optlastec.2020.106505 ↗
42. The ablation mechanism and ultra-fast dynamics property of lithium fluoride with the ultra-short pulse laser