Elemental sulfur corrosion of nickel-based alloy 825 in CO2–H2S-containing environment at high temperature and high pressure
Source abstract
Abstract
The elemental sulfur corrosion resistance and corrosion mechanisms of nickel-based alloy 825 at high temperature and high pressure are still missing. This work investigates the elemental sulfur corrosion of nickel-based alloy 825 in CO2-H2S-containing environment at high temperature and high pressure using weight loss measurement, surface characterization and in-situ electrochemical techniques including electrochemical noise, electrochemical impedance spectroscopy as well as polarization curves. The results show that in the absence of elemental sulfur nickel-based alloy 825 hardly corrodes in the environment containing 0.5 MPa CO2 and 1.6 MPa H2S at 100 °C, since the passive film on the substrate could offer an enough protective performance. However, with the increasing elemental sulfur content, the corrosion of nickel-based alloy 825 becomes more and more obvious. Under the condition of full coverage of elemental sulfur, the uniform corrosion rate of the specimen can be as high as 0.327 mm/y. Moreover, under such a condition, serious localized corrosion could also be observed on the specimen surface. Based on results of electrochemical measurement and surface analysis, it is considered that underneath the elemental sulfur deposit the formation of a strong acidic environment generated from the hydrolysis of elemental sulfur largely destroys the passive film, leading to serious corrosion. Therefore, nickel-based alloy 825 used in high sulfur-containing environment should pay close attention to safety risk from elemental sulfur corrosion. The results of this work could provide a reference for the material selection in high sulfur natural gas field.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Hydrogen uptake during active CO2-H2S corrosion of carbon steel wires in simulated annulus fluid
2. Analysis of corrosion failure and materials selection for CO2–H2S gas well10.1016/j.jngse.2020.103734 ↗
3. Influence of H2S on the pitting corrosion of 316L stainless steel in oilfield brine10.1016/j.corsci.2021.109265 ↗
4. The generation of corrosion under insulation and stress corrosion cracking due to sulphide stress cracking in an austenitic stainless steel hydrocarbon gas pipeline10.1016/j.engfailanal.2014.05.004 ↗
5. Electrochemical and surface analysis studies on corrosion inhibition of Q235 steel by imidazoline derivative against CO2 corrosion10.1016/j.corsci.2010.09.042 ↗
6. Synergistic inhibition effects of octadecylamine and tetradecyl trimethyl ammonium bromide on carbon steel corrosion in the H2S and CO2 brine solution10.1016/j.corsci.2017.07.006 ↗
7. Corrosion mechanisms of nickel-based alloys in chloride-containing hydrofluoric acid solution10.1016/j.engfailanal.2022.106580 ↗
8. Enhancement of electrical conductivity and corrosion resistance by gold-nickel coating of additively manufactured AlSi10Mg alloy10.1016/j.jmrt.2022.01.022 ↗
9. Corrosion resistant and tough multi-principal element Cr-Co-Ni alloys
10. Corrosion behavior and passive film composition of alloy 825 in high temperature and high H2S-CO2 containing environment10.3389/fmats.2021.728898 ↗
11. Optical measurement of uniform and localized corrosion of C1018, SS 410, and Inconel 825 alloys using white light interferometry10.1016/j.corsci.2014.06.046 ↗
12. Corrosion behaviour of alloy 31-UNS N08031-under conditions of oil & gas production10.1002/1521-4176(200210)53:10<765::AID-MACO765>3.0.CO;2-S ↗
13. Effect of elemental sulfur and sulfide on the corrosion behavior of Cr-Mo low alloy steel for tubing and tubular components in oil and gas industry10.3390/ma10040430 ↗
14. The accelerated corrosion of elemental sulfur for carbon steel in wet H2S environment
15. Modeling of sulfur deposition damage in the presence of irreducible water10.1080/10916461003663008 ↗
16. Hydrolysis of element sulphur in water and its effect on the corrosion
17. Effects of elemental sulfur on corrosion in sour gas systems10.5006/1.3585257 ↗
18. Solubility of sulfur in sour gas10.2118/14264-PA ↗
19. Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production
20. Erosion-corrosion and its mitigation on the internal surface of the expansion segment of N80 steel tube10.1007/s12613-020-2086-0 ↗
21. Consistent scheme for computing standard hydrogen electrode and redox potentials10.1002/jcc.23100 ↗
22. External reference electrodes for use in high temperature aqueous systems10.1149/1.2129192 ↗
23. 2005
24. Interaction of oxygen with Zr76Fe24 metglass: an X-ray photoelectron spectroscopy study10.1016/0022-5088(86)90082-2 ↗
25. Effects of hydrogen and stress on the electrochemical and passivation behaviour of 304 stainless steel in simulated PEMFC environment10.1016/j.electacta.2018.10.028 ↗
26. Interaction between pitting corrosion and critical flow velocity for erosion-corrosion of 304 stainless steel under jet slurry impingement10.1016/j.corsci.2019.07.008 ↗
27. Interactions of SO2 with sodium deposited on silica10.1016/0021-9797(85)90280-2 ↗
28. Effect of CO2 and H2S on the composition and stability of passive film on iron alloys in geothermal water10.1016/j.electacta.2007.01.086 ↗
29. Formation of ferrous sulfide film from sulfite on steel under anaerobic conditions10.5006/1.3315963 ↗
30. Deterministic models for passivity breakdown10.1016/0010-938X(90)90141-Q ↗
31. Surface oxide reduction by hydrogen permeation through iron foil detected using a scanning Kelvin probe10.1016/j.elecom.2012.11.022 ↗
32. Corrosion behavior of Hastelloy C-276 in supercritical water10.1016/j.corsci.2009.05.041 ↗
33. “Copper chromite” Catalysts: XPS structure elucidation and correlation with catalytic activity10.1016/0368-2048(82)85058-5 ↗
34. XPS study of catalytic compounds H2V12−xMexO31−δ nH2O (Me: Mo, Cr)10.1016/0368-2048(94)02161-9 ↗
35. Breakdown of passivity of nickel by fluoride: I. Electrochemical studies10.1149/1.2115620 ↗
36. Dissolution and passivation of nickel. An X-ray photoelectron spectroscopic study10.1039/f19777300327 ↗
37. Corrosion behavior of NiCrMo Alloy 625 in high temperature, hydrogenated water10.1016/S0010-938X(02)00230-5 ↗
38. Time-dependent corrosion behavior of electroless Ni-P coating in H2S/Cl- environment10.1016/j.ijhydene.2021.01.053 ↗
39. Unraveling the effects of CO2 and H2S on the corrosion behavior of electroless Ni-P coating in CO2/H2S/Cl- environments at high temperature and high pressure10.1016/j.corsci.2018.12.022 ↗
40. Effect of conjugated dihydroxy bile salts on electrolyte transport in rat colon10.1172/JCI107320 ↗
41. Contributions to screening in the solid state by electron systems of remote atoms: effects to photoelectron and Auger transitions10.1016/0368-2048(82)85044-5 ↗
42. Direct determination and quantification of sulphur forms in heavy petroleum and coals: 1. The X-ray photoelectron spectroscopy (XPS) approach10.1016/0016-2361(90)90001-7 ↗
43. Corrosion of nickel-based alloy G30 in the stratum water containing H2S/CO210.1007/s40242-014-3334-5 ↗
44. Mechanism for the formation of elemental sulfur from aqueous sulfide in chemical and microbiological desulfurization processes10.1021/ie950558t ↗
45. Novel time-frequency characterization of electrochemical noise data in corrosion studies using Hilbert spectra10.1016/j.corsci.2012.09.007 ↗
46. Rilling · 2003
47. Transient analysis through Hilbert spectra of electrochemical noise signals for the identification of localized corrosion of stainless steel10.1016/j.electacta.2013.04.085 ↗
48. Using wavelets transform in the analysis of electrochemical noise data10.1016/S0013-4686(99)00222-4 ↗
49. EIS study of potentiostatically formed passive film on 304 stainless steel10.1016/j.electacta.2011.07.072 ↗
50. Investigation of the corrosion behavior of wire arc additively manufactured alloy 82510.1007/s12666-022-02656-9 ↗
51. EIS evaluation of steady-state characteristic of 316L stainless steel passive film grown in acidic solution10.1016/j.elecom.2012.09.040 ↗
52. Synergistic effect of erosion and hydrogen on properties of passive film on 2205 duplex stainless steel
53. Activating Co nanoparticles on P-doped carbon nitride via enhancing Mott-Schottky effect by constructing interfacial chemical bonding for the efficient dehydrogenation of ammonia-borane
54. Polarization behavior of high-alloy OCTG in CO2 environment as affected by chlorides and sulfides10.5006/1.3583871 ↗
55. Dayalan · 1995 · 5788
56. Reactions of pipeline steels in carbon dioxide solutions10.1016/S0010-938X(98)00104-8 ↗