journal article·2023-09Open access

Microstructural evolution and corrosion resistance property of in-situ Zr–C(B, Si)/Ni–Zr reinforced composite coatings on zirconium alloy by laser cladding

Hao Wang, Jie Li, Kun Liu, Guoxiang Xu, Haiyang Zhu, Juan Wang, Cong Xu, Lixiang Wang, Artem Okulov

Abstract

In-situ reinforced coatings were prepared by laser cladding Ni60A+WC powder on R60702 zirconium. The microstructural evolution, microhardness, and corrosion resistance of in-situ reinforced composite coatings were analyzed. The reinforcements in the coatings were mainly composed of cross and fishbone-like α-Zr dendrites, block ZrC(B, Si)2, and slender needle-like NiZr. The results show that ZrC/ZrB2 reinforcements grew on the transition layer on the molten WC's surface, fell off, and connected. Some small particles acted as preferential nucleation points and preferentially grew into cross-shaped dendrites in the direction of greater supercooling. The cross-shaped dendrites were closely arranged in the direction of the main axis, and the axial growth rate was smaller than that of the side arms. During the growth process of the cross-shaped dendrites, Zr precipitated towards the side arms, forming α-Zr. Finally, the dendrites interconnected, forming fishbone-like reinforcements. As the laser power increased, the microhardness and corrosion resistance increased significantly. The microhardness (700 HV0.5) and corrosion resistance were highest when the laser power was 2.5 kW and the powder used was Ni60A+25% WC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Nuclear Materials and Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. On the efficacy of post-build thermomechanical treatments to improve properties of Zirconium fabricated using ultrasonic additive manufacturing
2. 3D printing of Zr-based bulk metallic glasses and components for potential biomedical applications10.1016/j.jallcom.2019.03.275 ↗
3. Effect of laser power on the microstructure and property of ZrB2/ZrC in-situ reinforced coatings on zirconium alloy by laser cladding10.1016/j.vacuum.2023.112104 ↗
4. Microstructure and mechanical characteristics of surface oxide dispersion-strengthened Zircaloy-4 cladding tube
5. Microstructural evolution and corrosion behaviors of Inconel 718 alloy produced by selective laser melting following different heat treatments
6. Mechanism of Zr in in situ-synthesized particle reinforced composite coatings by laser cladding10.1007/s12598-017-0944-3 ↗
7. The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings10.1016/j.surfcoat.2016.02.033 ↗
8. Mechanical properties and microstructures in zirconium deposited by injected powder laser additive manufacturing
9. Processing window development for laser cladding of zirconium on zirconium alloy10.1016/j.jmatprotec.2015.11.028 ↗
10. Effect of hybrid ultrasonic-electromagnetic field on cracks and microstructure of Inconel 718/60% WC composites coating fabricated by laser cladding10.1016/j.ceramint.2022.07.339 ↗
11. Effect of interlayer on interfacial microstructure and properties of Ni80Cr20/TC4 vacuum diffusion bonded joint10.1016/j.vacuum.2022.111738 ↗
12. Solidification cracking susceptibility of stainless steels: new test and explanation10.29391/2020.99.024 ↗
13. A new test for evaluating crack sensitivity of materials during welding
14. Effect of nano-WC content on microstructures and wear resistance of laser cladding Fe-based alloy coatings10.1088/2053-1591/abb631 ↗
15. Effect of WC particles preparation method on microstructure and properties of laser cladded Ni60-WC coatings10.1016/j.jmrt.2022.11.120 ↗
16. Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy
17. High speed laser cladding: solidification conditions and microstructure of a cobalt-based alloy10.1016/0921-5093(93)90240-F ↗
18. The gradient microstructure and high-temperature wear behavior of the CoCrMoSi coating by laser cladding10.1007/s11666-021-01184-0 ↗
19. Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718
20. An overview of Direct Laser Deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control
21. An overview of Direct Laser Deposition for additive manufacturing; Part I: transport phenomena, modeling and diagnostics
22. Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis10.1016/j.matdes.2017.10.033 ↗
23. Effect of high dilution on the in situ synthesis of Ni–Zr/Zr–Si (B, C) reinforced composite coating on zirconium alloy substrate by laser cladding10.1016/j.matdes.2015.07.158 ↗
24. Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatings10.1016/j.matdes.2015.12.121 ↗
25. Laser cladding induced spherical graphitic phases by super-assembly of graphene-like microstructures and the antifriction behavior10.1021/acscentsci.0c01365 ↗
26. Oxidation and electrochemical behaviors of Al2O3 and ZrO2 coatings on Zircaloy-2 cladding by thermal spraying10.1016/j.surfcoat.2017.11.050 ↗
27. Graphene grown on stainless steel as a high-performance and ecofriendly anti-corrosion coating for polymer electrolyte membrane fuel cell bipolar plates10.1016/j.jpowsour.2015.02.055 ↗
28. Electrochemical behavior of AISI316L stainless steel parts produced by laser-based powder bed fusion process and the effect of post annealing process
29. Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel10.1016/j.corsci.2016.11.008 ↗
30. Polydimethylsiloxane-titania nanocomposite coating: fabrication and corrosion resistance10.1016/j.polymer.2018.01.063 ↗
31. Distinction in anodic dissolution behavior on different planes of laser solid formed Ti-6Al-4V alloy10.1016/j.electacta.2018.07.112 ↗
32. Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting
33. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution10.1016/j.corsci.2018.03.047 ↗
34. Passivity and pseudopassivity of cemented carbides10.1016/j.ijrmhm.2004.11.006 ↗
35. Effects of WC on microstructure and corrosion resistance of directional structure Ni60 coatings10.1016/j.surfcoat.2020.125359 ↗