journal article·2024-05Open access

Influence of deposition path strategy on residual stress and deformation in weaving wire-arc additive manufacturing of disc parts

Jiang Zhao, Guo-zheng Quan, Yu-qing Zhang, Yao-yao Ma, Li-he Jiang, Wei-wei Dai, Qian Jiang

Abstract

Deposition pattern and path-planning deposition strategy have significant impacts on the deformation and residual stress of components during a wire-arc additive manufacturing (WAAM) process. This work comparatively addressed the influence of weaving and non-weaving deposition patterns on the distributions of residual stress and warping deformation during a single-bead-on-plate WAAM process. Further, four path strategies with different deposition sequences (in-out and out-in) and deposition directions (alternate and consistent) were designed for a weaving WAAM process of disc part, and their impacts on temperature history, warping deformation, and residual stress were comparatively analyzed through thermal-mechanical coupling finite element (FE) method. Simulation and experiment results manifest that, compared to the non-weaving pattern, the weaving deposition pattern results in more uniform deformation and lower residual stress on the deposited plate due to wider and shallower molten pool. Comparison results for the four deposition path strategies in the weaving WAAM process of disc part suggest that the out-in deposition sequence exhibits faster heat dissipation and uniform temperature field during the cooling stage, resulting in reduced warping deformation and residual stress on the workpiece. Moreover, uniform deformation is observed across path strategies employing alternate deposition direction. The out-in alternate deposition path strategy was identified as the optimal choice for the weaving WAAM process of disc part. Finally, physical experiments validated the simulated warping deformation of disc parts under different deposition path strategies. This work contributes to the design and optimization of weaving WAAM process for disc-shaped components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. An overview of wire arc additive manufacturing (WAAM) in shipbuilding industry10.1080/17445302.2020.1786232 ↗
2. Current status and perspectives on wire and arc additive manufacturing (WAAM)10.3390/ma12071121 ↗
3. A low-cost open-source metal 3-D printer10.1109/ACCESS.2013.2293018 ↗
4. Narrow gap applications of swing TIG-MIG hybrid weldings10.1016/j.jmatprotec.2019.04.043 ↗
5. A swing arc system for narrow gap GMA welding10.2355/isijinternational.52.110 ↗
6. High deposition wire arc additive manufacturing of mild steel: strategies and heat input effect on microstructure and mechanical properties10.1016/j.jmapro.2020.08.060 ↗
7. Influence of deposition strategies on tensile and fatigue properties in a wire + arc additive manufactured Ti-6Al-4V10.1016/j.ijfatigue.2021.106268 ↗
8. Laser-arc hybrid additive manufacturing of stainless steel with beam oscillation
9. Enhanced comprehensive properties of directed energy deposited Inconel 718 by a novel integrated deposition strategy10.1016/j.jmst.2022.09.026 ↗
10. Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts10.1016/j.jmapro.2019.03.006 ↗
11. Theoretical model of residual stress and warpage for wire and arc additive manufacturing stiffened panels10.3390/met10050666 ↗
12. Three-dimensional finite-element modelling of deformation in weld-based rapid prototyping10.1243/09544062JMES164 ↗
13. Fabrication of bimetallic additively manufactured structure (BAMS) of low carbon steel and 316L austenitic stainless steel with wire + arc additive manufacturing10.1108/RPJ-09-2018-0235 ↗
14. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling10.1016/j.jmatprotec.2013.04.012 ↗
15. Wire + arc additive manufacturing10.1179/1743284715Y.0000000073 ↗
16. Wire and arc additive manufacturing: opportunities and challenges to control the quality and accuracy of manufactured parts10.1016/j.matdes.2021.109471 ↗
17. Influence of deposition patterns on distortion of H13 Steel by wire-arc additive manufacturing10.3390/met11030485 ↗
18. Comparative study of deposition patterns for DED-Arc additive manufacturing of Al-404610.1016/j.matdes.2021.110122 ↗
19. Investigations into effect of weld-deposition pattern on residual stress evolution for metallic additive manufacturing10.1007/s00170-016-9510-7 ↗
20. Thermal stresses and deposition patterns in layered manufacturing10.1016/S0921-5093(01)01179-0 ↗
21. Finite element analysis and experimental validation of the thermomechanical behavior in laser solid forming of Ti-6Al-4V
22. Finite element modeling of multi-pass welding and shaped metal deposition processes10.1016/j.cma.2010.02.018 ↗
23. Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component10.1177/0954406212470363 ↗
24. Parametric study of residual stress formation in wire and arc additive manufacturing10.1016/j.jmapro.2022.01.043 ↗
25. Residual stress in wire and arc additively manufactured aluminum components10.1016/j.jmapro.2021.02.021 ↗
26. Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing
27. A new finite element model for welding heat sources10.1007/BF02667333 ↗
28. Influence of electric upsetting process variables on temperature field evolution by multi-field coupling finite element analysis10.1007/s12541-015-0202-2 ↗
29. Residual stress mapping in Inconel 625 fabricated through additive manufacturing: method for neutron diffraction measurements to validate thermomechanical model predictions10.1016/j.matdes.2016.10.003 ↗
30. Influence of wire-arc additive manufacturing path planning strategy on the residual stress status in one single buildup layer