journal article·2024-07Open access

Microstructure and excellent arc ablation resistance of Ni–8Al coating on copper substrate by high-speed laser cladding

Jianfeng Xu, Li Zhou, Guozheng Ma, Guolu Li, Haichao Zhao, Haidou Wang

Abstract

In the case of electrical contact, copper alloys are often unable to withstand arc ablation and premature failure. To solve this issue, Ni-8wt.%Al (Ni–8Al) coatings were successfully prepared on copper substrates utilizing the high-speed laser cladding. In addition, the microstructure evolution, microhardness, electric conductivity and arc ablation resistance of the prepared coatings were investigated in detail. As a result, the achieved Ni–8Al coatings were structurally dense with good metallurgical bonding to the substrate, of which the microstructure showed a bottom-up evolution of fine sub-grain structure. Notably, the microhardness of the coating was 191.7 HV0.2, representing an increase of 82.57% compared to the substrate, and the electrical conductivity was 18.03 %IACS, approaching that of pure nickel. Additionally, the increase in ablation currents led to changes in the ablation behaviors and failure mechanisms of both the substrate and coating. At high currents, a huge arc ablation crater appeared in the center of the substrate due to the reaction force of the anode flame and the difference in surface tension between the liquid metal at the center and the edge of the molten pool. Nevertheless, the coatings showed better arc ablation resistance due to the improvement of molten pool stability during arc ablation by the in situ formed Al2O3 layer on the coating surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Research progress on advanced rail materials for electromagnetic railgun technology10.1016/j.dt.2020.03.014 ↗
2. Current-carrying contact character and wear behavior of an elastic ring at different rolling speeds10.1016/j.engfailanal.2021.105825 ↗
3. Experimental study on the wear mechanism of the contact line in rigid pantograph-catenary systems10.1016/j.triboint.2023.108739 ↗
4. Microstructure and properties of the laser cladded in-situ ZrB2-ZrC/Cu composite coatings on copper substrate10.1016/j.surfcoat.2020.125937 ↗
5. Microstructure and interfacial evaluation of Co-based alloy coating on copper by pulsed Nd:YAG multilayer laser cladding10.1016/j.jallcom.2010.06.099 ↗
6. Laser cladding Ni-Co duplex coating on copper substrate10.1016/j.optlaseng.2010.02.009 ↗
7. Microstructure and tribological properties of laser-cladded Co-Ti3SiC2 coating with Ni-based interlayer on copper alloy10.1016/j.triboint.2022.107549 ↗
8. Effect of metallurgical behavior on microstructure and properties of FeCrMoMn coatings prepared by high-speed laser cladding10.1016/j.optlastec.2021.107431 ↗
9. Research status and prospect of extreme high-speed laser cladding technology10.1016/j.optlastec.2023.109800 ↗
10. Solidification characteristics and microstructure of TaNbZrTi refractory high entropy coating by extreme high-speed laser cladding10.1016/j.ijrmhm.2023.106257 ↗
11. Enhanced corrosion resistance of high speed laser-cladded Ni/316L alloy coating by heat treatment10.1016/j.jmrt.2023.03.070 ↗
12. Elimination of elemental segregation by high-speed laser remelting for ultra-high-speed laser cladding Inconel 625 coatings10.1016/j.jmrt.2023.04.028 ↗
13. Comparison of CoCrFeNi coatings prepared via high-speed laser cladding and normal laser cladding on microstructure and properties10.1016/j.intermet.2022.107795 ↗
14. Melting behavior of in-flight particles in ultra-high speed laser cladding10.1016/j.jmrt.2023.05.009 ↗
15. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding10.1016/j.apsusc.2020.146085 ↗
16. Microstructure and wear resistance of CoCrFeNiMn coatings prepared by extreme-high-speed laser cladding10.1016/j.surfcoat.2023.129821 ↗
17. Microstructure and properties of ZrB2-SiC continuous gradient coating prepared by high speed laser cladding10.1016/j.triboint.2022.107645 ↗
18. Friction and wear properties of a novel interface of ordered microporous Ni-based coating combined with MoS2 under complex working conditions10.1016/j.triboint.2023.108970 ↗
19. Excellent thermal shock resistance of NiCrAlY coatings on copper substrate via laser cladding10.1016/j.jmst.2022.05.011 ↗
20. Laser cladding of layered Zr/Cu composite cathode with excellent arc discharge homogeneity10.1016/j.surfcoat.2021.127454 ↗
21. Microstructure and properties of lightweight Al0.2CrNbTiV refractory high entropy alloy coating with different dilutions deposited by high speed laser cladding10.1016/j.surfcoat.2022.128873 ↗
22. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC+NiCr10.1016/j.apsusc.2015.03.168 ↗
23. Cracking mechanism of brittle FeCoNiCrAl HEA coating using extreme high-speed laser cladding10.1016/j.surfcoat.2021.127617 ↗
24. Microstructure and hardness of laser remelted surfaces of Al-5%Cu and Al-4%Cu-1%Ni alloys10.1016/j.jallcom.2023.170189 ↗
25. Hardened austenite steel with columnar sub-grain structure formed by laser melting10.1016/j.msea.2014.12.018 ↗
26. Effect of multiple thermal cycling on the microstructure and microhardness of Inconel 625 by high-speed laser cladding10.1016/j.jmrt.2023.03.064 ↗
27. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications10.1016/j.jmbbm.2013.01.021 ↗
28. Subgrain microstructural features in directed energy deposited stainless steel 316L: the influence of morphology on mechanical properties10.1016/j.msea.2023.145215 ↗
29. Clarify the role of Nb alloying on passive film and corrosion behavior of CoCrFeMnNi high entropy alloy fabricated by laser powder bed fusion10.1016/j.corsci.2023.111510 ↗
30. Effect of cold deformation on corrosion behavior of selective laser melted 316L stainless steel bipolar plates in a simulated environment for proton exchange membrane fuel cells10.1016/j.corsci.2022.110257 ↗
31. Coherent precipitation and strengthening in a dual-phase AlNi2Co2Fe1.5Cr1.5 high-entropy alloy10.1016/j.msea.2019.138241 ↗
32. Cu2O thin films grown by magnetron sputtering as solar cell absorber layers10.1016/j.mssp.2022.106818 ↗
33. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
34. Peak-fitting of Cu 2p photoemission spectra in Cu0, Cu1+, and Cu2+ oxides: a method for discriminating Cu0 from Cu1+
35. Evolution of CuO thin films through thermal oxidation of Cu films prepared by physical vapour deposition techniques
36. Oxidation studies of aluminum thin films by Raman spectroscopy10.1016/0040-6090(89)90619-6 ↗
37. Ye · 2002
38. Enhancing mechanisms of arc-erosion resistance for copper tungsten electrical contact using reduced graphene oxides in situ modified by copper nanoparticles10.1016/j.ijrmhm.2022.105934 ↗