Stress strain curve analysis of sheet based TPMS structures in quasi static compression test: A review
Source abstract
Abstract
Stress-strain behaviour of Triply Periodic Minimal Surface (TPMS) structures presents challenges in predicting their mechanical properties. Current studies are hindered by limitations in modelling its complex geometries. Therefore, this review aims to explore existing research on compression test which focus on stress-strain curve of TPMS structures. The stress-strain curve provides key understanding into their elastic, plastic, and failure behaviours under varying conditions. Factors such as structure, thickness, density, size effect, load condition, material and porosity reveal impacts on mechanical performance. Key findings emphasize the importance of wall thickness, where an increase from 0.1 mm to 0.5 mm leads to an approximately 183 % enhancement in compressive strength and elastic modulus. These discoveries provide valuable insights into the structural design of TPMS, enhancing their performance across various industries. • TPMS lattice show distinct stress-strain phase: elastic, plastic and densification. • Stress strain curve of TPMS structure depends on geometrical configuration. • Wall thickness, density and porosity affect material distribution in TPMS lattice. • Curve response varies with material composition (up to 20 %) and load angle (0°–90°). • Experimental data and computational model are crucial for validating result accuracy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. High mechanical performance of lattice structures fabricated by additive manufacturing10.3390/met14101165 ↗
2. Accelerating the design of lattice structures using machine learning10.1038/s41598-024-63204-7 ↗
3. Design and optimization of lattice structures: a review10.3390/app10186374 ↗
4. Mechanical properties of additively manufactured lattice structures designed by deep learning10.1016/j.tws.2023.111475 ↗
5. Design of multi-topology lattice structures based on a high-quality unit cell library10.1080/15397734.2024.2353323 ↗
6. Tailored elastic properties of beam-based lattice unit structures10.1007/s10999-023-09659-4 ↗
7. Designing additively manufactured lattice structures based on deformation mechanisms
8. Experimental evaluation of mechanical compression of lattice trusses made with Ti6Al4V for aerospace use10.1016/j.cja.2024.02.005 ↗
9. Stabilized and efficient multi-crushing properties via face-centered hierarchical honeycomb10.1016/j.ijmecsci.2023.108918 ↗
10. Ambu · Assessment of High Porosity Lattice Structures for Lightweight Applications · 2023 · 15
11. Additive manufacturing of titanium-based lattice structures for medical applications – a review10.1016/j.bprint.2023.e00267 ↗
12. A manufacturability evaluation of complex architectures by laser powder bed fusion additive manufacturing10.1115/1.4065315 ↗
13. Optimizing lightweight lattice structures through integrated parameterized design and fiber-reinforced additive manufacturing10.1016/j.cirp.2024.04.005 ↗
14. Evolution of global and local deformation in additively manufactured octet truss lattice structures
15. Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V10.1016/j.msea.2021.140925 ↗
16. Development and comparison of model-based and data-driven approaches for the prediction of the mechanical properties of lattice structures
17. Incorporating defects into model predictions of metal lattice-structured materials10.1016/j.msea.2021.142427 ↗
18. A novel design method for nonuniform lattice structures based on topology optimization10.1115/1.4040546 ↗
19. Effect of residual stress on mechanical properties of Triply periodic minimal surface lattice structures in Additive manufacturing10.1016/j.commatsci.2024.113318 ↗
20. Post-yielding and failure mechanism of additively manufactured triply periodic minimal surface lattice structures
21. Cresswell · Characterization and Modelling of Triply Periodic Minimum Surface (TPMS) Lattice Structures for Energy Absorption in Automotive Applications · 2024 · 295
22. Definition, fabrication, and compression testing of sandwich structures with novel TPMS-based cores10.3390/ma17215150 ↗
23. Crystal-Inspired cellular metamaterials and triply periodic minimal surfaces10.3390/biomimetics9050285 ↗
24. Design and study of additively manufactured Three periodic minimal surface (TPMS) structured porous titanium interbody cage
25. Design and compression behavior exploration of skeletal and sheet triply periodic minimal surface structures
26. Design and development of novel lattice structures for optimum energy absorption10.1115/1.4064752 ↗
27. Energy absorption characteristics of TPMS-filled square tubes under quasi-static axial crushing10.1016/j.tws.2024.111811 ↗
28. Tensile and compressive response of tungsten g-TPMS lattice structures
29. Elastic mechanical property hybridization of configuration-varying TPMS with geometric continuity10.1016/j.matdes.2022.110995 ↗
30. Novel modified triply periodic minimal surfaces (MTPMS) developed using genetic algorithm10.1016/j.jmrt.2023.08.040 ↗
31. A fast evaluation method for surface area, volume fraction, and hydraulic diameter of TPMS with different geometric characteristics
32. Crashworthiness analysis and optimization design of TPMS-filled structure10.1080/13588265.2021.1959171 ↗
33. Design and evaluation of TPMS-inspired 3D-printed scaffolds for bone tissue engineering: enabling tailored mechanical and mass transport properties10.1016/j.compstruct.2023.117638 ↗
34. Computational analysis of the compressive behavior of TPMS graded lattice structures versus primitive TPM lattice structures produced by additive manufacturing
35. Nonlinear instabilities of TPMS cellular units under axially loaded conditions10.1142/S0219455424502614 ↗
36. Combining multiple lattice-topology functional grading strategies for enhancing the dynamic compressive behavior of TPMS-based metamaterials10.1016/j.jmrt.2023.10.247 ↗
37. Experimental and numerical characterization of imperfect additively manufactured lattices based on triply periodic minimal surfaces10.1016/j.matdes.2023.112197 ↗
38. Modeling stress-strain curves with neural networks: a scalable alternative to the return mapping algorithm10.1016/j.commatsci.2020.109629 ↗
39. Predicting the complex stress-strain curves of polymeric solids by classification-embedded dual neural network10.1016/j.matdes.2023.111773 ↗
40. Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models10.1016/j.actamat.2016.04.034 ↗
41. Mechanical and corrosion behavior of sheet-based 316L TPMS structures10.1016/j.ijmecsci.2023.108439 ↗
42. Design, stereolithographic 3D printing, and characterization of TPMS scaffolds10.3390/ma17030654 ↗
43. Functionally graded and multi-morphology sheet TPMS lattices: design, manufacturing, and mechanical properties10.1016/j.jmbbm.2019.103520 ↗
44. Quasi-static and dynamic compressive behaviour of sheet TPMS cellular structures10.1016/j.compstruct.2021.113801 ↗
45. Mechanical response of 3D printed bending-dominated ligament-based triply periodic cellular polymeric solids10.1007/s11665-019-03982-8 ↗
46. Development of novel hybrid TPMS cellular lattices and their mechanical characterisation10.1016/j.jmrt.2021.08.092 ↗
47. TPMS-based interpenetrating lattice structures: design, mechanical properties and multiscale optimization10.1016/j.ijmecsci.2022.108092 ↗
48. Study on the energy absorption performance of triply periodic minimal surface (TPMS) structures at different load-bearing angles10.3390/biomimetics9070392 ↗
49. Compression performance and deformation behavior of 3D-printed PLA-based lattice structures10.3390/polym14051062 ↗
50. Compression performance and failure analysis of 3D-printed carbon fiber/PLA composite TPMS lattice structures10.3390/polym14214595 ↗
51. 3D printing of TPMS structural ZnO ceramics with good mechanical properties10.1016/j.ceramint.2021.01.152 ↗
52. Continuous transitions of triply periodic minimal surfaces
53. Laser powder bed fusion for the fabrication of triply periodic minimal surface lattice structures: synergistic macroscopic and microscopic optimization10.1016/j.jmapro.2024.03.081 ↗
54. Design of 3D rotating triply periodic minimal surface (RotTPMS) lattice plates: meanings of crystalline rotations and porosity10.1016/j.ijmecsci.2024.109090 ↗
55. TPMS scaffold generator: a scaffold-structure generator based on triply periodic minimal surfaces10.1016/j.amf.2024.200123 ↗
56. Shape optimization of additively manufactured lattices based on triply periodic minimal surfaces
57. Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS10.1016/j.jmbbm.2020.103727 ↗
58. Design of novel triply periodic minimal surface (TPMS) bone scaffold with multi-functional pores: lower stress shielding and higher mass transport capacity10.3389/fbioe.2024.1401899 ↗
59. Experimental and numerical studies on mechanical properties of TPMS structures10.1016/j.ijmecsci.2023.108657 ↗
60. Isotropic cellular structure design strategies based on triply periodic minimal surfaces
61. Isotropic design and mechanical characterization of TPMS-based hollow cellular structures10.1016/j.compstruct.2021.114818 ↗
62. Mechanical behavior of interpenetrating phase composite structures based on triply periodic minimal surface lattices10.1016/j.compstruct.2024.118044 ↗
63. On the directional elastic modulus of the TPMS structures and a novel hybridization method to control anisotropy10.1016/j.matdes.2021.110074 ↗
64. Stiffness, strength, anisotropy, and buckling of lattices derived from TPMS and Platonic and Archimedean solids
65. A phase-field approach for minimizing the area of triply periodic surfaces with volume constraint10.1016/j.cpc.2010.02.010 ↗
66. A review of recent investigations on flow and heat transfer enhancement in cooling channels embedded with triply periodic minimal surfaces (TPMS)10.3390/en15238994 ↗
67. Additively manufactured mechanical metamaterials based on triply periodic minimal surfaces: performance, challenges, and application10.1080/15376494.2021.1948151 ↗
68. Mechanical behavior of Al-Si10-Mg P-TPMS structure fabricated by selective laser melting and a unified mathematical model with geometrical parameter10.3390/ma16020468 ↗
69. MSLattice: a free software for generating uniform and graded lattices based on triply periodic minimal surfaces
70. TPMS Designer: a tool for generating and analyzing triply periodic minimal surfaces10.1016/j.simpa.2021.100167 ↗
71. Computation of the conducto-radiative effective heat conductivity of porous media defined by Triply Periodic Minimal Surfaces10.1016/j.ijthermalsci.2020.106598 ↗
72. A novel battery thermal management system based on P type triply periodic minimal surface10.1016/j.ijheatmasstransfer.2022.123090 ↗
73. STL-free design and manufacturing paradigm for high-precision powder bed fusion10.1016/j.cirp.2021.03.012 ↗
74. Porous scaffold design for additive manufacturing in orthopedics: a review10.3389/fbioe.2020.00609 ↗
75. Multifunctional mechanical metamaterials based on triply periodic minimal surface lattices10.1002/adem.201900524 ↗
76. Blanquer · Triply Periodic Minimal Surfaces (TPMS) for the Generation of Porous Architectures Using Stereolithography · 2021 · 19
77. Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering10.1080/10255842.2019.1569638 ↗
78. Laser powder bed fusion-built Ti6Al4V bone scaffolds composed of sheet and strut-based porous structures: morphology, mechanical properties, and biocompatibility
79. Evaluation of energy absorption capabilities and mechanical properties in FDM printed PLA TPMS structures10.1177/09544062211039530 ↗
80. Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials
81. Anisotropic structure-property relations of FDM printed short glass fiber reinforced polyamide TPMS structures under quasi-static compression10.1016/j.jmrt.2023.05.167 ↗
82. Compressive anisotropy of sheet and strut based porous Ti–6Al–4V scaffolds10.1016/j.jmbbm.2020.104243 ↗
83. Effect of TPMS reinforcement on the mechanical properties of aluminium–alumina interpenetrating phase composites
84. Mechanical performance of sandwich composites with additively manufactured triply periodic minimal surface cellular structured core10.1177/10996362211037012 ↗
85. Stiffness optimization design for TPMS architected cellular materials10.1016/j.matdes.2022.111078 ↗
86. Multi-dimensional hybridized TPMS with high energy absorption capacity10.1016/j.ijmecsci.2024.109244 ↗
87. Compressive characteristics and energy absorption capacity of automobile energy-absorbing box with filled porous TPMS structures10.3390/app14093790 ↗
88. Review of the state-of-the-art uses of minimal surfaces in heat transfer10.3390/en15217994 ↗
89. A review on integration of lightweight gradient lattice structures in additive manufacturing parts10.1177/1687814020916951 ↗
90. Triply periodic minimal surface based lattices for acoustic performance10.1177/09574565241270201 ↗
91. Experimental and numerical investigation of polymer-based 3D-printed lattice structures with largely tunable mechanical properties based on triply periodic minimal surface10.3390/polym16050711 ↗
92. Design optimization of additive manufactured edgeless simple cubic lattice structures under compression10.3390/ma16072870 ↗
93. In pursuit of a high-performance mechanical metamaterial: simple-cubic-octahedral plate lattice10.1016/j.ijmecsci.2024.109189 ↗
94. Improved mechanical properties and energy absorption of BCC lattice structures with triply periodic minimal surfaces fabricated by SLM10.3390/ma11122411 ↗
95. Compression behaviors and mechanical properties of modified face-centered cubic lattice structures under quasi-static and high-speed loading10.3390/ma15051949 ↗
96. Topologically optimized lattice structures with superior fatigue performance10.1016/j.ijfatigue.2022.107188 ↗
97. Tailorable and predictable mechanical responses of additive manufactured TPMS lattices with graded structures10.1016/j.msea.2022.143109 ↗
98. High strain rate mechanical behaviour of uniform and hybrid metallic TPMS cellular structures10.1016/j.tws.2023.111109 ↗
99. Effect of material variation on the uniaxial compression behavior of FDM manufactured polymeric TPMS lattice materials10.1016/j.matpr.2021.02.276 ↗
100. Mechanical characterisation and numerical modelling of TPMS-based gyroid and diamond Ti6Al4V scaffolds for bone implants: an integrated approach for translational consideration10.3390/bioengineering9100504 ↗