Microstructure evolution, wear resistance and corrosion resistance of CoCrCu0.5FeNiSix high-entropy alloy coatings fabricated by laser cladding
Source abstract
Abstract
This study aims to thoroughly investigate the mechanisms by Si element affects the phase composition, microstructure, wear resistance, and corrosion resistance of high-entropy alloy coatings. CoCrCu 0.5 FeNiSi x (x = 0, 0.5, 1, 1.5, 2) high-entropy alloy coatings were fabricated on the surface of AISI 1045 steel using laser cladding technology. The experimental results indicated that Si promotes the formation of silicide phase and BCC phase. Additionally, the addition of Si encourages grain refinement and the transformation from columnar to equiaxed crystals. The microhardness of the CoCrCu 0.5 FeNiSi x high-entropy alloy coatings increased with the addition of Si. The average microhardness of the Si 2 coating reached 389.05 HV 0.5 , which is 2.33 times greater than that of the Si 0 coating (166.77 HV 0.5 ). As the Si content increased, the wear resistance of the CoCrCu 0.5 FeNiSi x high-entropy alloy coatings gradually improved. The average friction coefficient decreased from 0.9499 to 0.6285, and the wear rate decreased from 0.02913 mm 3 /N·m to 0.0146 mm 3 /N·m. The main wear mechanisms include adhesive wear, abrasive wear, and oxidative wear. The addition of Si enhanced the corrosion resistance of the CoCrCu 0.5 FeNiSi x high-entropy alloy coatings. In a 3.5 % NaCl solution at room temperature, the Si 2 coating exhibited the highest self-corrosion potential (−0.429 V) and the lowest self-corrosion current (1.15E-6 A/cm 2 ). EIS and M − S test results indicated that the passivation film of CoCrCu 0.5 FeNiSi x high-entropy alloy coatings had n-type semiconductor characteristics, and the passivation film of Si 2 coating was the most stable and dense. The findings provide practical guidance and theoretical support for fabricating high-performance high-entropy alloy coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing10.1016/j.actamat.2018.05.009 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. Structure, stability, and properties of high-entropy alloys10.1134/S0031918X20080098 ↗
4. Physical metallurgy of high-entropy alloys10.1007/s11837-015-1583-5 ↗
5. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
6. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
7. Thermal stability of hard transparent AlxCoCrCuFeNi oxide thin films10.1016/j.surfcoat.2008.05.023 ↗
8. Tribological behavior of detonation sprayed CrFeNiAl0. 3Ti0. 3 high entropy alloy coatings in seawater environment10.1016/j.triboint.2024.109480 ↗
9. A review on laser cladding of high-entropy alloys, their recent trends and potential applications10.1016/j.jmapro.2021.06.041 ↗
10. Study of tribological property of laser-cladded FeCoCrNiMnx high-entropy alloy coatings via experiment and molecular dynamics simulation10.1016/j.triboint.2023.109106 ↗
11. Laser material processing10.1179/1743280411Y.0000000003 ↗
12. Microstructural evolution and corrosion behavior of CoCrFeNiAlxMn(1−x) dual-phase high-entropy alloy coatings prepared by laser cladding10.1016/j.jallcom.2021.161251 ↗
13. Cultivating a comprehensive understanding of microstructural attributes and wear mechanisms in FeCrCoNiAlTix high-entropy alloy coatings on TC6 substrates through laser cladding fabrication10.1016/j.jallcom.2024.173865 ↗
14. Anomalous microstructure and tribological evaluation of AlCrFeNiW0. 2Ti0. 5 high-entropy alloy coating manufactured by laser cladding in seawater10.1016/j.jmst.2020.12.050 ↗
15. Microstructure and high-temperature wear behavior of CoCrFeNiWx high-entropy alloy coatings fabricated by laser cladding10.1016/j.triboint.2022.107574 ↗
16. Effect of V on microstructure, wear and corrosion properties in AlCoCrMoVx high entropy alloy coatings by laser cladding10.1016/j.jmrt.2023.02.098 ↗
17. Phase separation of metastable CoCrFeNi high entropy alloy at intermediate temperatures10.1016/j.scriptamat.2016.08.008 ↗
18. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.actamat.2017.12.052 ↗
19. Fabricating antibacterial CoCrCuFeNi high-entropy alloy via selective laser melting and in-situ alloying10.1016/j.jmst.2021.07.002 ↗
20. Microstructure and mechanical properties of 3D ink-extruded CoCrCuFeNi microlattices10.1016/j.actamat.2022.118187 ↗
21. On the enhanced wear resistance of laser-clad CoCrCuFeNiTix high-entropy alloy coatings at elevated temperature10.1016/j.triboint.2022.107767 ↗
22. Effects of Nb content on the microstructure and properties of CoCrFeMnNiNbx high-entropy alloy coatings by laser cladding10.1016/j.jmrt.2024.01.002 ↗
23. Evolution in microstructure, wear, corrosion, and tribocorrosion behavior of Mo-containing high-entropy alloy coatings fabricated by laser cladding10.1016/j.corsci.2021.109727 ↗
24. Microstructures and properties of AlCrFeNiMnx high-entropy alloy coatings fabricated by laser cladding on a copper substrate10.1016/j.jallcom.2022.166778 ↗
25. Microstructure and wear mechanism of CoCrCuFeNiVx high entropy alloy by sintering and electron beam remelting10.1016/j.physb.2022.413834 ↗
26. Effect of B addition on the microstructure and tribological properties of laser cladding FeCoCrNiCu composite coatings10.1016/j.triboint.2024.109750 ↗
27. Strengthening and deformation mechanism of interstitially N and C doped FeCrCoNi high entropy alloy10.1016/j.jallcom.2022.164118 ↗
28. Microstructure and high temperature erosion behavior of laser cladded CoCrFeNiSi high entropy alloy coating10.1016/j.surfcoat.2021.127218 ↗
29. Microstructural evolution and wear characteristics of laser-clad CoCrFeNiMn high-entropy alloy coatings incorporating tungsten carbide
30. Tailoring oxidation resistance of Fe2CoCrNi0. 5 based high entropy alloys by addition of alloying elements (Si, Cu and Si-Cu co-added)10.1016/j.jallcom.2022.165951 ↗
31. The role of Si on microstructure and high-temperature oxidation of CoCr2FeNb0. 5Ni high-entropy alloy coating10.1016/j.corsci.2021.109417 ↗
32. High-efficiency fabrication of Inconel 625 coating for AISI 1045 carbon steel through laser cladding with hot wire: microstructure and wear resistance10.1016/j.jmapro.2023.07.063 ↗
33. Plastic deformation and critical condition for orthogonal machining two-layered materials with laser cladded Cr-Ni-based stainless steel onto AISI 104510.1016/j.jclepro.2017.02.167 ↗
34. Phase stabilities of high entropy alloys10.1016/j.scriptamat.2019.12.041 ↗
35. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
36. Solid‐solution phase formation rules for multi‐component alloys10.1002/adem.200700240 ↗
37. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
38. Effect of Cr content on microstructure and properties of Mo0. 5VNbTiCrx high-entropy alloys10.1016/j.jallcom.2019.153352 ↗
39. Strengthening mechanisms of laser cladding TiC/FeCoCrNiCu high-entropy composite coatings: microstructure evolution and wear behaviors10.1016/j.triboint.2024.109979 ↗
40. Effect of Cu-doping on tribological properties of laser-cladded FeCoCrNiCux high-entropy alloy coatings10.1016/j.triboint.2023.108868 ↗
41. Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors. Erratum10.1107/S0021889812050054 ↗
42. A novel approach to regulate the microstructure of laser-clad FeCrNiMnAl high entropy alloy via CeO2 nanoparticles10.1016/j.surfcoat.2023.130026 ↗
43. Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding10.1016/j.surfcoat.2021.128009 ↗
44. Microstructure evolution and fracture behavior of rotating laser welded-brazed 6061 aluminum alloys/304 SS dissimilar joint10.1016/j.matchar.2022.112543 ↗
45. Process parameter optimization for laser powder directed energy deposition of Inconel 738LC10.1016/j.optlastec.2024.110940 ↗
46. Optimal parameters for 5-axis laser cladding10.1016/j.proeng.2013.08.229 ↗
47. Joining of sintered SiC ceramics at a lower temperature using borosilicate glass with laser cladding Si modification layer10.1016/j.jeurceramsoc.2020.11.044 ↗
48. Numerical method for calculation of complete casting processes—Part I: theory10.1080/10407790.2015.1033296 ↗
49. Effects of Cu/Si on the microstructure and tribological properties of FeCoCrNi high entropy alloy coating by laser cladding
50. Efficient electrochemical synthesis of Cu3Si/Si hybrids as negative electrode material for lithium-ion battery
51. Influence of dilution rate on the microstructure and properties of FeCrCoNi high-entropy alloy coating10.1016/j.matdes.2018.01.007 ↗
52. Heat transport in silicon from first-principles calculations10.1103/PhysRevB.84.085204 ↗
53. Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology10.1016/j.optlastec.2019.02.001 ↗
54. The Co− Fe (cobalt− iron) system10.1007/BF02868548 ↗
55. Multi-objective optimization of process parameters in laser cladding CoCrCuFeNi high-entropy alloy coating10.1007/s11666-022-01408-x ↗
56. Microstructural characterization and electron backscatter diffraction analysis across the welded interface of duplex stainless steel10.1016/j.apsusc.2017.03.301 ↗
57. Impacts of laser cladding residual stress and material properties of functionally graded layers on titanium alloy sheet
58. Grain size, grain boundary sliding, and grain boundary interaction effects on nanocrystalline behavior10.1016/j.msea.2009.05.012 ↗
59. Nb doping in laser-cladded Fe25Co25Ni25 (B0. 7Si0. 3) 25 high entropy alloy coatings: microstructure evolution and wear behavior10.1016/j.surfcoat.2020.126321 ↗
60. Preparation of NiCrBSi-WC/Co coatings by stable magnetic field assisted supersonic plasma spraying and its wear resistance mechanism10.1016/j.matchar.2022.112433 ↗
61. Effect of microstructure on the tensile properties and impact toughness of TC21G titanium alloy
62. Microstructure evolution and frictional wear behavior of laser cladding FeCrCoNiMo0. 5Wx high-entropy alloy coatings10.1016/j.intermet.2023.107888 ↗
63. Microstructure and properties of TiC-enhanced CrMnFeCoNi high-entropy alloy coatings prepared by laser cladding10.1016/j.triboint.2023.108246 ↗
64. Electrochemical corrosion behavior in sulfuric acid solution and dry sliding friction and wear properties of laser-cladded CoCrFeNiNbx high entropy alloy coatings10.1016/j.surfcoat.2023.129425 ↗
65. Effect of Nb content on the microstructure and corrosion resistance of FeCoCrNiNbx high-entropy alloys in chloride ion environment10.1016/j.jallcom.2022.168013 ↗
66. Effect of thermally induced B2 phase on the corrosion behavior of an Al0. 3CoCrFeNi high entropy alloy10.1016/j.jallcom.2022.163886 ↗
67. Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior10.1016/j.corsci.2017.02.019 ↗
68. Corrosion resistant nanostructured eutectic high entropy alloy10.1016/j.corsci.2019.108315 ↗
69. Effect of WC content on microstructure and properties of laser-cladded in-situ reactive ZrC/ZrB2 composite coatings on zirconium alloy10.1016/j.ijrmhm.2023.106486 ↗
70. Effect of roughness on general corrosion and pitting of (FeCoCrNi) 0.89 (WC) 0.11 high-entropy alloy composite in 3.5 wt.% NaCl solution10.1016/j.corsci.2018.10.025 ↗
71. Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi) 100-xMox high-entropy alloys10.1016/j.jallcom.2019.152139 ↗
72. Corrosion behaviors of W-doped laser-cladded high-entropy alloy of AlCoCrFeNi in a simulated sulfur-containing seawater environment10.1016/j.intermet.2024.108298 ↗
73. Corrosion studies of Li, Na and Si doped Zn-Al alloy immersed in NaCl solutions10.1016/j.jallcom.2018.07.109 ↗
74. Understanding the protective role of a gradient titanium oxide ceramic layer on Ti6Al4V against corrosion via analyses of Mott-Schottky curve and electron work function (EWF)10.1016/j.ceramint.2022.07.123 ↗
75. Comparison of the corrosion and passivity behavior between CrMnFeCoNi and CrFeCoNi coatings prepared by argon arc cladding10.1016/j.jmrt.2020.05.093 ↗
76. Impedance spectroscopy as a technique for studying the spontaneous passivation of metals in electrolytes10.1016/0013-4686(95)00464-5 ↗
77. Microstructure and corrosion behavior of CeO2/FeCoNiCrMo high-entropy alloy coating prepared by laser cladding10.1016/j.jallcom.2021.161826 ↗