journal article·2020-03Open access

On nitrogen diffusion during solution treatment in a high nitrogen austenitic stainless steel

Rui Zhou, Derek O. Northwood, Cheng Liu

Abstract

The generation and microstructural characteristics of the surface layer formed during solution treatment at 1200 °C of a high nitrogen austenitic stainless steel, have been investigated using optical microscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS). Contrasting with a bulk microstructure of austenite and ferrite, a multi-layer surface structure is obtained, which consists of a white outer-surface layer which is ferrite and a grey subsurface layer with austenite. Formation of the multi-layer structure occurs through phase transformations between austenite and ferrite due to the various levels of nitrogen diffusion. With increasing solution treatment time, the thicknesses of both the surface and the subsurface layer increase. Hardness tests show that the microhardness increases from the surface layer, to the subsurface layer and then to the bulk. This is attributed to the combined effects of solid solution strengthening from nitrogen and the grain size of austenite or ferrite.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Intergranular corrosion behavior of high nitrogen austenitic stainless steel
2. Precipitation reactions caused by nitrogen uptake during service at high temperatures of a niobium stabilised austenitic stainless steel10.1016/j.actamat.2004.06.001 ↗
3. Research progress and development tendency of nitrogen alloyed austenitic stainless steels10.1016/S1006-706X(15)60015-2 ↗
4. High nitrogen steels: nickel free high nitrogen steels10.2355/isijinternational.36.901 ↗
5. P2000 — a high-nitrogen austenitic steel for application in bone surgery10.1371/journal.pone.0214384 ↗
6. Welding of nickel free high nitrogen stainless steel: microstructure and mechanical properties10.1016/j.dt.2016.06.003 ↗
7. Role of nitrogen on the corrosion behavior of austenitic stainless steels10.1016/S0010-938X(02)00040-9 ↗
8. Overview: high-nitrogen alloying of stainless steels10.1016/0921-5093(95)09991-3 ↗
9. Fabrication of high strength high nitrogen stainless steel with excellent corrosion resistance and its mechanical properties10.1081/AMP-120027495 ↗
10. Evaluation of the residual stress and microstructure character in SAF 250710.1016/j.surfcoat.2018.03.012 ↗
11. Delta ferrite is ubiquitous in type 304 stainless steel: consequences for magnetic characterization10.1016/j.jmmm.2018.02.092 ↗
12. Effects of cooling rates on -ferrite/-austenite formation and martensitic transformation in modified ferritic heat resistant steel10.1016/j.fusengdes.2017.05.095 ↗
13. Microstructural evolution and mechanical properties of aging high nitrogen austenitic stainless steels10.1007/s12613-010-0381-x ↗
14. Effect of short duration solution treatment at temperatures below 1000ºC on s-phase precipitation in a super duplex stainless steel alloy10.1002/mawe.201700280 ↗
15. Effect of aging and oxidation on strain hardening behaviour of a nickel-free high nitrogen austenitic stainless steel10.1007/s12540-016-5611-y ↗
16. Effect of solution treatment on the transformation behaviour of cold-rolled duplex stainless steels10.1016/0921-5093(95)09863-1 ↗
17. Effects of heat treatment on the phase ratio and corrosion resistance of duplex stainless steel10.2320/matertrans.MER2008168 ↗
18. The influence of solution treatment temperature on microstructure and corrosion behavior of high temperature ageing in 25% Cr duplex stainless steel10.1016/j.jallcom.2011.06.099 ↗
19. Microstructural bandings evolution behavior and their effects on microstructure and mechanical property of super-austenitic stainless steel10.1016/j.msea.2018.09.006 ↗
20. Isostatic diffusion bonding and post-solution treatment between Cr22Ni5Mo3MnSi and Cr30Ni7Mo3MnSi duplex stainless steels10.1016/j.jmapro.2018.06.010 ↗
21. Effect of solution treatment on cavitation erosion behavior of high-nitrogen austenitic stainless steel10.1016/j.wear.2019.01.098 ↗
22. Nitrogen-induce selective high-temperature internal oxidation behavior in duplex stainless steel 19Cr-10Mn-0.3Ni-χn10.1016/j.corsci.2015.06.013 ↗
23. Low-temperature nitriding of deformed austenitic stainless steels with various nitrogen contents obtained by prior high-temperature solution nitriding10.1007/s11661-016-3559-7 ↗
24. Effect of nitrogen and nickel on the microstructure and mechanical properties of plasma welded UNS S32760 super-duplex stainless steels10.1007/s10853-009-3878-9 ↗
25. Effect of high temperature aging on wear resistance of a high-nitrogen stainless steel10.4028/www.scientific.net/KEM.775.454 ↗
26. Self-organized formation of multilayer structure in high nitrogen stainless steel during solution treatment10.1557/adv.2019.42 ↗
27. Hosseini VA, Karlsson L. Physical and kinetic simulation of nitrogen loss in high temperature heat affected zone of duplex stainless steels. Materialia https://doi.org/10.1016/j.mtla.2019.100325.10.1016/j.mtla.2019.100325 ↗
28. High temperature phase transformations in strongly metastable austenite-martensitic CrMnNi-C cast steels10.1016/j.jallcom.2016.06.026 ↗
29. Precipitation behaviour of 25%Cr-5.5Ni austenitic stainless steel containing 0.87% nitrogen10.1002/srin.199605492 ↗
30. Residual ferrite and relationship between composition and microstructure in high-nitrogen austenitic stainless steels10.1007/s11661-015-3160-5 ↗
31. The influence of interstitial diffusion across the fusion line on the HAZ microstructure and properties in 12% chromium type 1.4003 steels10.1007/BF03266681 ↗
32. The effect of carbon contents on intragranular ferrite formed in the V-Ti-N microalloyed steel with a carbon content gradient prepared by controlling the surface decarburization10.1016/j.matchar.2018.04.014 ↗
33. Solution heat treatment of plasma nitrided 15-5PH stainless steel Part I. Improvement of the corrosion resistance10.4149/km_2011_2_107 ↗
34. Abnormal mechanical behavior of medium-carbon steel under strong ferrite-pearlite-martensite triple-phase microstructures10.1016/j.msea.2017.06.035 ↗
35. On the nitrogen diffusion in a duplex stainless steel10.1590/1516-1439.337714 ↗
36. Controlled dissolution of colossal quantities of nitrogen in stainless steel
37. Nitrogen surface enrichment of austenitic stainless steel ISO 5832-110.1007/s10853-010-4827-3 ↗
38. Evaluation of nitrogen diffusion in thermo-mechanically nanostructured and plasma nitrided stainless steel10.1016/j.surfcoat.2016.03.058 ↗