Texture evolution associated with the preferential recrystallization during annealing process in a hot-rolled near β titanium alloy
Source abstract
Abstract
Texture evolution associated with the recrystallization behavior during solution treatment was investigated in a hot-rolled Ti-7333 by virtue of Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD) and Electron Backscatter Diffraction (EBSD). The results show that the microstructure of the rolled specimens consists of a large number of elongated β grains and a small amount of equiaxed β grains. The dominant texture components are confirmed to be {111}<110> and {100}<001>. With the progressing of the solution treatment, the recrystallization occurs and the orientations of {111}<110> and {001}<100> hold the preferred orientations to act as the nuclei for the recrystallized grains. It is found that the recrystallized grains are mainly located on the bulged boundaries or within the deformed grains, and the mechanism of the strain-induced boundary migration (SIBM) mainly accounts for the formation of the recrystallized grains nucleated on the bulged boundaries, which eventually leads to the texture of the solution-treated specimens inheriting the previous orientation of <110> parallel to the rolling direction. The results of the present work provide a valuable reference for understanding the relationship between the texture evolution and the recrystallization behavior during the annealing process in near β titanium alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Candidate materials for high-strength fastener applications in both the aerospace and automotive industries10.1361/105994905X75466 ↗
2. Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6 Fe)10.1361/105994905X75628 ↗
3. Microstructural development and mechanical properties of PM Ti-45Al-2Nb-2Mn-0.8 vol.% TiB2 processed by field assisted hot PressingJ10.1016/j.jmst.2014.08.008 ↗
4. J Dependence of mechanical properties on the microstructure characteristics of a near β titanium alloy Ti-733310.1016/j.jmst.2018.06.018 ↗
5. Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength beta titanium alloy sheets10.1016/j.msea.2015.02.030 ↗
6. Texture and microstructure evolution of commercially pure titanium during hot rolling: role of strain-paths10.1016/j.matdes.2015.11.073 ↗
7. Characteristics of a hot-rolled near β titanium alloy Ti-733310.1016/j.matchar.2017.04.031 ↗
8. Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process10.1016/j.jallcom.2014.08.129 ↗
9. Microstructure and texture heterogeneity of a hot-rolled near-alpha titanium alloy sheet10.1016/j.matchar.2015.03.026 ↗
10. Texture inhomogeneity in a Ti–Nb-based β-titanium alloy after warm rolling and recrystallization10.1016/j.msea.2007.06.077 ↗
11. J Microstructure,texture evolution and mechanical properties of cold rolled Ti-32.5Nb-6.8Zr-2.7Sn biomedical beta titanium alloy10.1016/j.jmst.2017.04.017 ↗
12. Transition bands and recrystallization in metals
13. Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size10.1016/j.jallcom.2013.10.180 ↗
14. An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy10.1016/j.jallcom.2014.03.070 ↗
15. Dynamic recrystallization mechanisms during high speed rolling of Mg–3Al–1Zn alloy sheets10.1016/j.scriptamat.2015.10.040 ↗
16. Tracking microstructure, texture and boundary misorientation evolution of hot deformed and post-deformation annealed Ti–6Al–4V alloy10.1016/j.msea.2015.09.060 ↗
17. Crystallographic texture evolution in Ti-35Nb alloy deformed by cold rolling10.1016/j.matdes.2014.04.024 ↗
18. Influence of solution treatment on microstructure and mechanical properties of a near β titanium alloy Ti-733310.1016/j.matdes.2015.06.015 ↗
19. Continuous recrystallization in austenitic stainless steel after large strain deformation10.1016/S1359-6454(02)00013-7 ↗
20. Hot deformation mechanism and microstructure evolution of a new near β titanium alloy10.1016/j.msea.2013.07.019 ↗
21. Modelling of continuous recrystallization in aluminium alloys10.1007/BF00356683 ↗
22. Behavior of a recrystallization in HANA-4 and HANA-6 zirconium-based alloys10.1016/j.jallcom.2008.12.089 ↗
23. Orientations of recrystallization nuclei developed in columnar-grained Ni at triple junctions and a high-angle grain boundary10.1016/j.actamat.2007.05.019 ↗
24. Substructures and recrystallization of deformed (100)[001]-oriented crystals of high-purity silicon-iron10.1016/0001-6160(63)90062-2 ↗
25. Orientation relationship between primary and secondary recrystallized texture in electrical steel10.1016/S1359-6454(02)00271-9 ↗
26. Recrystallization behavior of a high-manganese steel: experiments and simulations10.1016/j.actamat.2015.08.057 ↗
27. Texture evolution and the recrystallization behavior in a near β titanium alloy Ti-7333 during the hot-rolling process10.1016/j.matchar.2019.109999 ↗
28. Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: example of an austenitic stainless steel10.1016/0001-6160(89)90123-5 ↗
29. Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe–Mn–C alloy10.1016/j.actamat.2011.01.063 ↗
30. Suwas · 2014 · 77