journal article·2022-01Open access

Influence of powder particle size on the microstructure of a hot isostatically pressed superalloy

Zonghong Qu, Pingxiang Zhang, Yunjin Lai, Qingxiang Wang, Jiaming Song, Shujin Liang

Abstract

The influence of powder particle size on the microstructure of the powder metallurgy superalloy FGH97 was investigated. The powder atomized by the plasma rotating electrode process was sieved to three types: fine powder (0–53 μm), medium-sized powder (53–150 μm), and coarse powder (150–212 μm), which were all characterized by their nearly perfect spherical shape and low oxygen content. The powder was filled, degassed, sealed, and then densified by hot isostatic pressing. Then the microstructures of the fully dense compacts were characterized. The results show that fine powder led to limited plastic deformation of particles during densification, resulting in a minimum of Σ3 boundaries and modest PPB (Previous Particle Boundary) decoration. The fine powder compact showed that low impact toughness was caused by fracture along the PPB. However, the addition of Nb and Hf promoted the formation of the dispersed stable MC particles inside the grain, thus preventing the diffusion of C to the surface of the powder particles to form M6C carbides, and resulting in little tendency to present PPB for this alloy. Therefore, the medium-sized powder and coarse powder compact did not present PPB. Thus, the medium-sized powder is optimal for HIP compact preparation, given that fine powder produced PPB while the coarse powder increased the grain size.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Reed · 2006
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
3. Neural network model for correlating microstructural features and hardness properties of nickel-based superalloys10.1016/j.jmrt.2020.10.042 ↗
4. Fundamental aspects of hot isostatic pressing: an overview10.1007/s11661-000-0078-2 ↗
5. Assessment of Russian P/M superalloy EP741NP
6. Modelling of deformation and microstructural changes in P/M Rene 95 under isothermal forging conditions10.1016/j.msea.2006.05.030 ↗
7. Cooling precipitation and strengthening study in powder metallurgy superalloy Rene88DT10.1016/S0921-5093(01)01758-0 ↗
8. On the role of γ particles within γ′ precipitates on damage accumulation in the P/M nickel-base superalloy N1810.1016/j.msea.2005.04.006 ↗
9. Production of net-shape static parts by direct HIPing of nickel base superalloy prealloyed powders10.4028/www.scientific.net/AMR.278.277 ↗
10. Experimental study and numerical simulation of dynamic recrystallization for a FGH96 superalloy during isothermal compression10.1016/j.jmrt.2020.03.026 ↗
11. Linear friction welding of dissimilar Ni-based superalloys: microstructure evolution and thermo-mechanical interaction10.1016/j.jmrt.2021.01.036 ↗
12. Review and analysis of powder prior boundary (PPB) formation in powder metallurgy processes for nickel-based super alloys
13. Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy10.1016/j.actamat.2015.02.023 ↗
14. Effect of heat treatment on mechanical property and microstructure of a powder metallurgy nickel-based superalloy10.1016/j.msea.2019.03.064 ↗
15. Preparation of hot-isostatic-pressed powder metallurgy superalloy Inconel 718 free of prior particle boundaries10.1016/j.msea.2016.11.031 ↗
16. Effects of strain amount and strain rate on grain structure of a novel high Co nickel-based polycrystalline superalloy10.1016/j.matdes.2017.06.004 ↗
17. A high-throughput methodology search for the optimum cooling rate in an advanced polycrystalline nickel base superalloy10.1016/j.matdes.2017.05.025 ↗
18. Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 71810.1016/j.msea.2006.07.053 ↗
19. A comparative study of Inconel 718 formed by high deposition rate laser metal deposition with GA powder and PREP powder10.1016/j.matdes.2016.06.037 ↗
20. Influence of powder particle size distribution and pressure on the kinetics of hot isostatic pressing (HIP) consolidation of P/M superalloy Rene 95
21. Effect of initial powder particle size on the hot workability of powder metallurgy Ni-based superalloys10.1016/j.matdes.2020.108926 ↗
22. Plastic strain-induced evolution of CSL boundaries at elevated temperature for Ni-base superalloy: experimental and phase-field perspective10.1016/j.jmrt.2019.12.084 ↗
23. Solute segregation induced stabilizing and strengthening effects on Ni Σ3 [110](111) symmetrical tilt grain boundary in nickel-based superalloys10.1016/j.jmrt.2021.01.066 ↗
24. Grain boundary engineering of powder processed Ni-base superalloy RR1000: influence of the deformation parameters10.1016/j.msea.2014.12.112 ↗
25. Perry · 1995
26. Predicting ternary activities using binary data
27. Cohesion in alloys — fundamentals of a semi-empirical model10.1016/0378-4363(80)90054-6 ↗
28. Gale · 2004
29. Thermodynamic modelling of the M6C carbide in cemented carbides and high-speed steel10.1016/j.calphad.2005.07.001 ↗
30. Effect of delta ferrites on the anisotropy of impact toughness in martensitic heat-resistant steel10.1016/j.jmrt.2018.12.008 ↗