journal article·2022-07Open access

Post-processing of additively manufactured microstructures using alternating-magnetic field-assisted finishing

Zhiguang Sun, Zenghua Fan, Yebing Tian, Chander Prakash, Jiang Guo, Ling Li

Abstract

Complex-shaped components with unique microstructural features are becoming more and more important in the section of the optics and aerospace industries. Currently, additive manufacturing (AM) has been acknowledged as a potential technology to fabricate complex-shape components for the industrial application. However, the poor surface quality limits the performance of the AM components. This work was focused on the post processing for the 316L rectangular microstructures fabricated by the selective laser melting (SLM) technique. A novel alternating-magnetic field-assisted finishing (A-MFAF) method was proposed to improve the surface quality of rectangular microstructures while maintaining the surface profile accuracy. The magnetic field generator was designed to integrate two permanent magnet poles with different magnetization directions and a slotted magnetic pole holder. The alternating magnetic field of the finishing tool was thus achieved in the finishing zone. Finite element analysis (FEA) was utilized to verify the feasibility of the magnetic field generator. The material removal principle of the A-MFAF method was introduced in detail. Mathematical models of the material removal ratio (MRR) were established. The effects of finishing parameters on surface roughness were evaluated quantitatively. Experimental results showed that the 316L materials were uniformly removed from the top to the bottom surface of the rectangular microstructures. The SLM-generated surface defects were removed as well. Surface roughness (Sa) of the top and bottom surfaces was reduced from initial 9.79 μm to 0.85 μm and 3.12 μm, respectively. After finishing, the residual stress was converted from tensile to compressive states.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced Surface Polishing Techniques · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. “Structured”, “textured” or “engineered” surfaces10.1016/S0007-8506(07)63233-8 ↗
2. Advances in engineered surfaces for functional performance10.1016/j.cirp.2008.09.003 ↗
3. Advances in micro milling: from tool fabrication to process outcomes10.1016/j.ijmachtools.2020.103670 ↗
4. Suet. To. Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications10.1016/j.ijmachtools.2019.04.009 ↗
5. Precision manufacturing methods of inserts for injection molding of microfluidic systems
6. 3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications10.1007/s10404-016-1715-4 ↗
7. SLM tooling for die casting with conformal cooling channels10.1007/s00170-013-5523-7 ↗
8. Design and evaluation of an additively manufactured aircraft heat exchanger10.1016/j.applthermaleng.2018.04.032 ↗
9. Additive manufacturing of products with functional fluid channels: a review
10. Advances in polishing of optical freeform surfaces: a review10.1016/j.jmatprotec.2020.116828 ↗
11. Abrasive jet polishing of micro-channels using compound SiC abrasives with compound additives10.1007/s00170-012-4555-8 ↗
12. The diffraction efficiency of echelle gratings increased by ion-beam polishing of groove surfaces10.1134/S1063785016080319 ↗
13. A review on magnetic abrasive finishing10.1007/s00170-020-06363-x ↗
14. Dynamic multiphase modeling and optimization of fluid jet polishing process10.1016/j.cirp.2012.03.073 ↗
15. Laser polishing of selective laser melted components10.1016/j.ijmachtools.2015.05.002 ↗
16. Airbag tool polishing for aspherical glass lens molds10.1007/s12206-009-1120-y ↗
17. Material removal characteristics of magnetic-field enhanced shear thickening polishing technology10.1016/j.jmrt.2021.09.092 ↗
18. Shape-adaptive magnetic field-assisted batch polishing of three-dimensional surfaces10.1016/j.precisioneng.2022.04.003 ↗
19. Impact of different magnetorheological fluid compositions on poppet valve profile polishing10.1016/j.precisioneng.2022.03.002 ↗
20. Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications10.1016/j.jmrt.2021.01.046 ↗
21. Experimental study on vibration-assisted magnetic abrasive finishing for internal blind cavity by bias external rotating magnetic pole10.1016/j.precisioneng.2021.11.007 ↗
22. Differential finishing of freeform surfaces (knee joint) using R-MRAFF process and negative replica of workpiece as a fixture10.1080/10910344.2017.1402929 ↗
23. Application of hybrid nature-inspired algorithm: single and bi-objective constrained optimization of magnetic abrasive finishing process parameters10.1016/j.jmrt.2020.05.003 ↗
24. Finishing of rectangular microfeatures by localized vibration-assisted magnetic abrasive polishing method10.1016/j.jmapro.2019.11.026 ↗
25. New vibration-assisted magnetic abrasive polishing (VAMAP) method for microstructured surface finishing10.1364/OE.24.013542 ↗
26. Surface finishing and evaluation of three-dimensional silicon microchannel using magnetorheological fluid10.1115/1.1811113 ↗
27. Feasibility study on surface finishing of miniature V-grooves with magnetic compound fluid slurry10.1016/j.precisioneng.2016.01.010 ↗
28. A novel magnetic field-assisted mass polishing of freeform surfaces10.1016/j.jmatprotec.2019.116552 ↗
29. Study on magnetic abrasive finishing of AlSi10Mg alloy prepared by selective laser melting10.1007/s00170-019-04485-5 ↗
30. Design and fabrication of a novel polishing tool for finishing freeform surfaces in magnetic field assisted finishing (MFAF) process10.1016/j.precisioneng.2017.01.010 ↗
31. Modification using magnetic field-assisted finishing of the surface roughness and residual stress of additively manufactured components10.1016/j.cirp.2017.04.084 ↗
32. Experimental investigations on magnetic abrasive finishing of Ti-6Al-4V using a multiple pole-tip finishing tool10.1007/s00170-019-04871-z ↗
33. Investigation of a novel finishing tool in magnetic field assisted finishing for titanium alloy Ti-6Al-4V10.1016/j.jmapro.2019.05.007 ↗
34. Theoretical analysis of magnetorheological finishing of HVOF sprayed WC-Co coating10.1016/j.ijmecsci.2021.106629 ↗
35. Hysteresis and magnetic flux leakage of long stroke micro/nanopositioning electromagnetic actuator based on Maxwell normal stress10.1016/j.precisioneng.2022.01.003 ↗