Effects of rheological properties and printing speed on molding accuracy of 3D printing basalt fiber cementitious materials
Source abstract
Abstract
In order to use the material's rheological properties to adjust and optimize the process parameters of 3D printed cement-based materials. The rheological properties of cementitious materials are tested at different settling times with the same ratio. The 3D printing speed (extrusion speed and feed speed) is analyzed based on the 3D printing strip molding accuracy. The test results are indicated as follows. Within the group of seven with settling time for 10 min, 30 min, 50 min, 60 min, 70 min, 80 min and 100 min, the yield stress and plastic viscosity increases with increasing settling time of the freshly mixed cementitious material. The width of the print strips decreases with increasing rheological parameters when the printing speed is fixed. The width of the print strips increases with the increasing the extrusion speed when the rheological parameters and the feed speed are fixed. The width of the print strip decreases as the feed speed increases when the rheological parameters and extrusion speed are fixed. In addition, the feed speed has a greater impact on the uniformity of the print strip, and the extrusion speed only affects the width of the print strip. There is linear correlation between plastic viscosity, static yield stress and extrusion speed, the plastic viscosity has the strongest positive correlation with extrusion speed. The ratio of optimal extrusion speed to optimal feed speed is stabilized between 4 and 5. Therefore, the optimal printing speed can be determined by testing the rheological properties of the material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Possibilities for the application of agro-industrial wastes in cementitious materials: a brief review of the Brazilian perspective
2. Physical and durability properties of activated alkali cement based on blast furnace slag as a function of %Na2O
3. Printability and advantages of 3D printing mortar with 100% recycled sand10.1016/j.conbuildmat.2020.121699 ↗
4. V-ision of 3D printing with concrete — technical, economic and environmental potentials10.1016/j.cemconres.2018.06.001 ↗
5. Technologies for improving buildability in 3D concrete printing10.1016/j.cemconcomp.2021.104144 ↗
6. Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies10.1016/j.cemconcomp.2020.103571 ↗
7. Mechanical anisotropy of ultra-high performance fibre-reinforced concrete for 3D printing10.1016/j.cemconcomp.2021.104310 ↗
8. Extrusion rheometer for 3D concrete printing10.1016/j.cemconcomp.2021.104075 ↗
9. Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers10.1016/j.cemconres.2022.106777 ↗
10. Design of novel nozzles for higher interlayer strength of 3D printed cement paste
11. Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion10.1016/j.cemconres.2019.02.017 ↗
12. Computer vision for real-time extrusion quality monitoring and control in robotic construction10.1016/j.autcon.2019.01.022 ↗
13. Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: an experimental and numerical study10.1016/j.conbuildmat.2020.120094 ↗
14. Printable properties of cementitious material containing copper tailings for extrusion based 3D printing10.1016/j.conbuildmat.2017.12.051 ↗
15. Measurement of tensile bond strength of 3D printed geopolymer mortar10.1016/j.measurement.2017.08.051 ↗
16. The effect of print parameters on the (Micro)structure of 3D printed cementitious materials
17. 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse10.1016/j.compositesb.2019.107660 ↗
18. The influence of 3D printed concrete process parameters on forming precision
19. Printability region for 3D concrete printing using slump and slump flow test10.1016/j.compositesb.2019.106968 ↗
20. Effect of printing parameters in 3D concrete printing: printing region and support structures
21. Rheological requirements for printable concretes10.1016/j.cemconres.2018.04.005 ↗
22. A comprehensive review on fresh state rheological properties of extrusion mortars designed for 3D printing applications10.1016/j.conbuildmat.2022.127629 ↗
23. Rheological, mechanical properties, and statistical significance analysis of shotcrete with various natural fibers and mixing ratios
24. Development of mortar for laying and coating with pineapple fibers10.1590/1807-1929/agriambi.v24n3p187-193 ↗
25. Technological perspective for use the natural pineapple fiber in mortar to repair structures10.1007/s12649-021-01374-5 ↗
26. Effect of fiber characteristic parameters on the high and low temperature rheological properties of basalt fiber modified asphalt mortar
27. Study on the effectiveness of fibre reinforcement on the engineering performance of foamed concrete
28. Rheological behaviors and structure build-up of 3D printed polypropylene and polyvinyl alcohol fiber-reinforced calcium sulphoaluminate cement composites10.1016/j.jmrt.2020.12.115 ↗
29. Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing10.1016/j.conbuildmat.2018.11.252 ↗
30. Characterization of coarse aggregate morphology and its effect on rheological and mechanical properties of fresh concrete10.1016/j.conbuildmat.2021.122940 ↗
31. Rheological properties of cemented coal gangue backfill based on response surface methodology10.1016/j.conbuildmat.2021.124836 ↗
32. Effects of paste thickness on coated aggregates on rheological properties of concrete
33. Printing performance of 3D printing cement-based materials containing steel slag
34. Resting time effect on the rheological behavior of cement paste in presence of superplasticizer
35. Effect of temperature, resting time and brick dust (Horasan) on the rheological properties of hydraulic lime-based grouts10.1016/j.conbuildmat.2020.120644 ↗
36. The influence of basalt fiber on the printability of 3D printing cement-based materials