journal article·2023-01Open access

Effect of silica fume on shrinkage of cement-based materials mixed with alkali accelerator and alkali-free accelerator

Zhenmin Wan, Tingshu He, Ning Chang, Renhe Yang, Heping Qiu

Abstract

The current price of silica fume has a more significant advantage than cement. Application in shotcrete can improve early strength and the durability of shotcrete, and has a good synergistic effect with accelerators to promote setting and hardening. This paper mainly studies the impact of silica fume (FS) on the shrinkage of cement-based materials mixed with the alkali accelerator and alkali-free accelerator. Test autogenous shrinkage, drying shrinkage, mass loss, and internal humidity change, and analyze with XRD, MIP, SEM and other test methods. At the age of 180 days, the autogenous shrinkage of 9FSAR-4 increased by 29.1% and the drying shrinkage increased by 33.5%, and the autogenous shrinkage of 9FSAS-7 increased by 23.1%, and the drying shrinkage increased by 33.8% compared with the blank group. The results show that: FS can significantly increase the autogenous shrinkage and drying shrinkage of cement mortar mixed with alkali accelerator and alkali-free accelerator. MIP tests found that the incorporation of FS could refine the pore structure of the cement paste, increasing the number of 5–50 nm pore sizes, which would increase the capillary tensile stress in the cement paste. Nevertheless, the addition of silica fume reduces the total porosity and makes the pore distribution shift towards the decreasing direction. It reduces the mass loss and internal humidity change of cement mortar under dry conditions. XRD test found that FS can significantly reduce the content of CH in cement paste, weakening the confinement effect of CH on C–S–H and C-A-H.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete10.1016/j.conbuildmat.2016.02.101 ↗
2. Durability of shotcrete for underground support– Review and update10.1016/j.conbuildmat.2018.12.151 ↗
3. Effect of gypsum content in sprayed cementitious matrices: early age hydration and mechanical properties10.1016/j.cemconcomp.2018.10.015 ↗
4. Synergistic effects of some other ingredients on liquid sodium aluminate accelerated agent
5. Comparison of effects of sodium bicarbonate and sodium carbonate on the hydration and properties of Portland cement paste10.3390/ma12071033 ↗
6. Hydration of portland cement in the presence of aluminum-containing setting accelerators10.1134/S1070427213060013 ↗
7. Adaptation of the standard EN 196–1 for mortar with accelerator10.1016/j.conbuildmat.2016.09.147 ↗
8. Alkali metal salts as set accelerators for high alumina cement10.1016/0008-8846(93)90149-4 ↗
9. Lagerblad · 2010 · 173
10. Mehta · 1997
11. There is no Plan B for dealing with the climate crisis10.1080/00963402.2019.1654255 ↗
12. Douglas Crawford-Brown, Substantial global carbon uptake by cement carbonation10.1038/ngeo2840 ↗
13. Hydration reaction and compressive strength of small amount of silica fume on cement-fly ash matrix
14. Influence of liquid accelerators combined with mineral admixtures on early hydration of cement pastes10.1016/j.conbuildmat.2021.123659 ↗
15. Selecting environment-friendly mineral admixtures to improve the durability of shotcrete under sulfate attack10.1021/acssuschemeng.1c07809 ↗
16. Influence of colloidal silica and silica fume on the rheology and mechanical properties of high-performance shotcrete10.1007/s12205-022-0356-2 ↗
17. Plastic and early-age shrinkage of ultra-high-performance concrete (UHPC): experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions
18. Experimental investigation on the autogenous shrinkage of steam cured ultra-high-performance concrete10.1016/j.conbuildmat.2017.11.172 ↗
19. Experimental study on the effect of key mix design parameters on shrinkage and cracking resistance of dry-mix shotcrete10.1016/j.conbuildmat.2021.126216 ↗
20. Accelerators for shotcrete–Chemical composition and their effects on hydration, microstructure and properties of cement-based materials10.1016/j.conbuildmat.2021.122557 ↗
21. Standard for common portland cement
22. Standard for flash setting admixtures for shotcrete
23. 2012
24. Production of geopolymer concrete by utilizing volcanic pumice dust
25. Long-term durability properties of geopolymer concrete: an in-depth review
26. Mechanical, physical and durability properties of activated alkali cement based on blast furnace slag as a function of % Na2O
27. Accelerating admixtures for shotcrete10.1016/S0958-9465(98)80007-3 ↗
28. An overview on application of nanotechnology in construction industry
29. Pore structural and fractal analysis of the influence of fly ash and silica fume on the mechanical property and abrasion resistance of concrete10.1142/S0218348X2140003X ↗
30. Characterization of the mesostructural organization of cement particles in fresh cement paste10.1016/j.conbuildmat.2016.08.143 ↗
31. Fractal model for simulating the space-filling process of cement hydrates and fractal dimensions of pore structure of cement-based materials10.1016/S0008-8846(97)00157-9 ↗
32. Effect of the particle size of nano silica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO210.1016/j.conbuildmat.2013.10.002 ↗
33. Effect of water-to-cementitious materials ratio and silica fume on the autogenous shrinkage of concrete10.1016/S0008-8846(03)00149-2 ↗
34. Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes10.1016/j.conbuildmat.2012.02.017 ↗
35. Long-term drying shrinkage of mortar—influence of silica fume and size of fine aggregate10.1016/S0008-8846(00)00347-1 ↗
36. Effect of fiber addition on the autogenous shrinkage of silica fume
37. Influence of silica fume replacement of cement on expansion and drying shrinkage10.1016/S0008-8846(98)00127-6 ↗
38. Cracking tendency and drying shrinkage of silica fume concrete for bridge deck applications
39. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials10.1016/j.conbuildmat.2020.121952 ↗
40. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes10.1016/j.conbuildmat.2005.02.024 ↗
41. Early hydration of a Portland cement in water and sodium hydroxide solutions: composition of solutions and nature of solid phases10.1016/0008-8846(89)90046-X ↗
42. Hofmann · 2004
43. Early hydration of ordinary Portland cement with an alkaline shotcrete accelerator10.1680/adcr.2005.17.1.1 ↗
44. Mechanism and preparation of liquid alkali-free liquid setting accelerator for shotcrete
45. Relation between chemical processes and mechanical properties of sprayed cementitious matrices containing accelerators10.1016/j.cemconcomp.2017.02.002 ↗
46. Effects of silica fume on the abrasion resistance of low-heat Portland cement concrete10.1016/j.conbuildmat.2022.127165 ↗
47. Research on the synergy of micro-nano bubble water and alkali-free liquid accelerator to improve the early strength and hydration rate of cement
48. Autogenous deformation and change of the relative humidity in silica fume-modified cement paste
49. Effect of the leaching of calcium hydroxide from cement paste on mechanical and physical properties10.1016/S0008-8846(97)00042-2 ↗
50. 6-Shrinkage of concrete, concrete and masonry movements