journal article·2023-01Open access

Comparative analysis between the laser beam welding and low current pulsed GMA assisted high-power laser welding by numerical simulation

Xiangchen Fan, Guoliang Qin, Zili Jiang, Hao Wang

Abstract

By introducing the low current pulsed gas metal arc (GMA), the bridging ability of the laser beam welding (LBW) can be effectively improved. However, the impact mechanism of the additive GMA is hard to investigate by experimental methods. In this paper, the three-dimensional transient mass and heat transfer models of the low current pulsed GMA assisted high-power laser welding and single LBW are established. The pulsed arc and laser heat source models are optimized based on the arc morphology images, arc voltage and welding current. The drop transfer and arc pressure models are improved by comprehensively considering the effect of the molten pool surface deformation and the interaction of laser and arc on the arc heat flow distribution. Based on the established welding models, a comparative analysis is conducted to investigate the evolution characteristics of the temperature and flow fields in the molten pool. The simulated results show that the additive low current pulsed GMA in novel hybrid welding significantly increases the high temperature region of the molten pool, while allowing the liquid metal to expand transversely, thereby increasing the length and width of the molten pool. These greatly improve the bridging ability of LBW and extend its application range.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Research on the current situation and development strategy of welding production in China's manufacturing industry [J]
2. Guan · 2002 · 71
3. Zhou · 1988 · 6
4. A review of laser welding techniques for magnesium alloys[J]10.1016/j.jmatprotec.2005.06.068 ↗
5. Li · 1992
6. Wang · 1992
7. Arc augmented laser processing of materials[J]10.1063/1.327560 ↗
8. Interaction between electrical arc and Nd: YAG laser radiation[J]10.1016/j.cirp.2007.05.048 ↗
9. Arc voltage behavior in GMAW-P under different drop transfer modes[J]
10. Yin · 2007 · 302
11. Effects of Nd: YAG laser pulsed MAG arc hybrid welding parameters on its weld shape[J]10.1179/174329306X147544 ↗
12. Research and application of laser-arc composite welding technology[J]
13. Wang · 2006
14. Influence of laser-arc composite welding process parameters on weld seam morphology[J]
15. Volume of fluid (VOF) method for the dynamics of free boundaries[J]10.1016/0021-9991(81)90145-5 ↗
16. Modeling of laser keyhole welding: Part I. mathematical modeling, numerical methodology, role of recoil pressure, multiple reflections, and free surface evolution[J]10.1007/s11661-002-0190-6 ↗
17. Simulation-based numerical optimization of arc welding process for reduced distortion in welded structures[J]10.1016/j.finel.2014.02.003 ↗
18. Effects of temperature-dependent material properties on welding simulation[J]10.1016/S0045-7949(02)00040-8 ↗
19. A model of deep penetration laser welding based on calculation of the keyhole profile[J]10.1088/0022-3727/27/9/002 ↗
20. A mathematical model for penetration laser welding as a free-boundary problem[J]10.1088/0022-3727/30/9/005 ↗
21. Numerical simulation of the transient formation process of the molten pool of laser deep fusion welding motion[J]
22. The role of recoil pressure in energy balance during laser materials processing[J]10.1088/0022-3727/30/18/008 ↗
23. Keyhole modeling during laser welding[J]10.1063/1.373033 ↗
24. Experimental determination of temperature threshold for melt surface deformation during laser interaction on iron at atmospheric pressure[J]10.1088/0022-3727/44/43/435402 ↗
25. Fluid flow and heat transfer in GMA weld pools[J]
26. Sun · 1998 · 1
27. Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding[J]10.1016/j.ijheatmasstransfer.2008.09.018 ↗
28. Simulation study of a hybrid process for the prevention of weld bead hump formation[J]
29. Analysis of weld pool dynamic during stationary laser–MIG hybrid welding[J]10.1007/s00170-008-1896-4 ↗
30. Modeling of transport phenomena in hybrid laser-MIG keyhole welding[J]10.1016/j.ijheatmasstransfer.2008.02.011 ↗
31. Three-dimensional analysis of molten pool in GMA-laser hybrid welding[J]
32. The modelling of heat, mass and solute transport in solidification systems[J]10.1016/0017-9310(89)90054-9 ↗
33. Weld pool flows during initial stages of keyhole formation in laser welding[J]10.1088/0022-3727/42/17/175502 ↗
34. A model of deep penetration laser welding based on calculation of the keyhole profile[J]10.1088/0022-3727/27/9/002 ↗
35. Numerical simulation of molten pool dynamics in high power disk laser welding[J]10.1016/j.jmatprotec.2011.09.011 ↗
36. Zong · 2017
37. Pressures produced by gas tungsten arcs[J]10.1007/BF02670227 ↗
38. Advanced gas metal arc welding processes[J]10.1007/s00170-012-4513-5 ↗
39. Surface tension of binary metal surface active solute systems under conditions relevant to welding metallurgy[J]10.1007/BF02657748 ↗
40. Mechanism of keyhole formation and stability in stationary laser welding[J]10.1088/0022-3727/35/13/320 ↗