journal article·2023-03Open access

Preparation of hybrid conducting polymers blend nanocomposite for energy conversion using experimental data and TD-DFT/DMOl3 computations

Mohamed Shafick Zoromba, Fahd Alharbi, Ahmed F. Al-Hossainy, Mohamed Helmy Abdel-Aziz

Abstract

In the presence of sodium dodecyl sulphate in an acidic solution while using ferric chloride as an oxidizing agent, a blend of three conducting polymers of poly (ortho-phenylene diamine) (PoPDA), poly (meta phenylene diamine), and polypyrrole was produced. ZrO2 nanoparticles were prepared via sol-gel method and a hybrid nanocomposite of the three conducting polymers blend and zirconium oxide nanoparticles (TCPB/ZrO2)HNC was synthesized. Using the Physical Vapor Deposition technology, a hybrid nanocomposite thin film was prepared from (TCPB/ZrO2)HNC. Density functional theory (DFT) was also used to develop optimization using TD-DFTD/Mol3 and Cambridge Serial Total Energy Bundle (TD-FDT/CASTEP). By closely matching the reported XRD and Raman spectra, the TD-DFT computations validated the molecular structure of the studied materials and confirmed its molecular structure. According to XRD calculations, (TCPB/ZrO2)HNC has an average crystallite size of 61.67 nm. The direct and indirect optical energy bandgaps for the (TCPB/ZrO2)HNC, are 2.352 and 2.253 eV, respectively. As measured by TD-DFT/DMol3, the isolated molecule of (TCPB/ZrO2) HNC has a bandgap of 2.415 eV. The optical properties suggested by CASTEP in TD-DFT agree quite well with the values obtained experimentally. The large optical energy bandgap of (TCPB/ZrO2)HNC is advantageous for various energy storage applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Conducting polymers and applications · Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. The applications of polymers in solar cells: a review10.3390/polym11010143 ↗
2. National context drives concerns10.1038/s41560-018-0246-5 ↗
3. Electricity without carbon10.1038/454816a ↗
4. The path to 25% silicon solar cell efficiency: history of silicon cell evolution10.1002/pip.892 ↗
5. Solar photovoltaic electricity: current status and future prospects10.1016/j.solener.2010.12.002 ↗
6. Solar energy mater
7. Synthesis and characterization of polypyrrole and its application for solar cell10.1007/s00339-017-1131-y ↗
8. Predicting kerf quality characteristics in laser cutting of basalt fibers reinforced polymer composites using neural network and chimp optimization10.1016/j.aej.2022.04.032 ↗
9. Poly (o-phenylenediamine) thin film for organic solar cell applications10.1007/s10008-018-4077-x ↗
10. Facile synthesis and fabrication of a poly (ortho-anthranilic acid) emeraldine salt thin film for solar cell applications10.1039/C8NJ01204K ↗
11. Fabrication of heterojunction diode using doped-poly (ortho-aminophenol) for solar cells applications10.1016/j.physb.2019.04.030 ↗
12. Electrochemically mediated carboxylative cyclization of allylic/homoallylic amines with CO2 at ambient pressure10.1021/acs.orglett.2c03377 ↗
13. Tuning the optical properties of poly (o-phenylenediamine-co-pyrrole) via template mediated copolymerization10.1080/15685551.2018.1459078 ↗
14. Mechanical Performance of glass/epoxy composites enhanced by micro-and nanosized aluminum particles10.1177/1528083719874479 ↗
15. Fabrication and characterization of nano-filled polymer composites
16. The effects of nano-silica/nano-alumina on fatigue behavior of glass fiber-reinforced epoxy composites10.1177/0021998316661870 ↗
17. Electrical and mechanical performance of zirconia-nickel functionally graded materials10.5829/idosi.ije.2013.26.04a.06 ↗
18. Improved strength and ductility of friction stir tailor-welded blanks of base metal AA2024 reinforced with interlayer strip of AA707510.1016/j.rinp.2019.102911 ↗
19. Doped-poly (para-nitroaniline-co-aniline): synthesis, semiconductor characteristics, density, functional theory and photoelectric properties10.1016/j.jallcom.2019.03.118 ↗
20. Electrochemically promoted N-heterocyclic carbene polymer-catalyzed cycloaddition of aldehyde with isocyanide acetate10.1007/s11426-022-1360-3 ↗
21. 3D fibrous aerogels from 1D polymer nanofibers for energy and environmental applications10.1039/D2TA05984C ↗
22. Effect of nano Al2O3 coated Ag reinforced Cu matrix nanocomposites on mechanical and tribological behavior synthesis by P/M technique10.1177/0021998320934860 ↗
23. Evaluation of mechanical properties and microstructure of Al/Al–12% Si multilayer via warm accumulative roll bonding process10.1177/0021998317692141 ↗
24. A combinatory ferroelectric compound bridging simple ABO3 and A-site-ordered quadruple perovskite
25. Synthesis and characterization of a new PAI/ZnO derived from 3, 3-bis (4-(4-aminophenoxy) phenyl)-2-benzofuran-1-one
26. Preparation and study of surface modified ZnO nanoparticles in copoly (amid-imide) nanocomposite films containing triptycene
27. A review: emerging trends in bionanocomposites
28. Molecular layer deposition of zircone and ZrO2/zircone alloy films: growth and properties10.1002/cvde.201207045 ↗
29. Combined experimental and DFT-TDDFT computational studies of doped [PoDA+ PpT/ZrO2] C nanofiber composites and its applications10.1016/j.vacuum.2020.109777 ↗
30. Raman spectroscopic evidence of impurity-induced structural distortion in SmB610.1002/jrs.5709 ↗
31. A.K. Netam, V.P. Bhargava, R. Singh, P. Sharma, Physico-chemical characterization of ayurvedic swarna bhasma by using SEM, EDX, XRD and PSA, DOI.
32. Cold atmospheric pressure plasma technology for modifying polymers to enhance adhesion: a critical review10.1002/9781119846703.ch19 ↗
33. Preparation and characterization of poly (acrylonitrile-methoxy polyethylene glycol (350) monoacrylate-lithium acrylate)10.3866/PKU.WHXB20071221 ↗
34. Thermal analysis and non-isothermal crystallization kinetic of PET/UiO-66 nanocomposite10.1016/j.jmrt.2022.03.063 ↗
35. Application of Box–Behnken design and desirability function in the optimization of Cd (II) removal from aqueous solution using poly (o-phenylenediamine)/hydrous zirconium oxide composite: equilibrium modeling, kinetic and thermodynamic studies10.1007/s11356-018-2566-1 ↗
36. Structural, optical, and electrical properties of multi-walled carbon nanotubes/polyaniline/Fe3O4 ternary nanocomposites thin film10.1016/j.synthmet.2018.02.006 ↗
37. Effect of through-the-thickness position of aluminum wire mesh on the mechanical properties of GFRP/Al hybrid composites10.1016/j.jmrt.2021.08.026 ↗
38. Synthesis and crystal structure of layered silicate PLS-3 and PLS-4 as a topotactic zeolite precursor10.1039/b905415d ↗
39. Physical structure, TD-DFT computations, and optical properties of hybrid nanocomposite thin film as optoelectronic devices10.1016/j.jiec.2022.05.004 ↗
40. A facile synthetic route and dual function of network luminescent porous polyester and copolyester containing porphyrin moiety for metal ions sensor and dyes adsorption10.1016/j.micromeso.2020.110063 ↗
41. TD-DFT calculations and two-dimensional poly (ortho phenylenediamine-co-meta-phenylene diamine) for polymeric solar cell applications10.1007/s11696-022-02279-w ↗
42. DFT and experimental study on adsorption of dyes on activated carbon prepared from apple leaves10.1007/s42823-020-00187-1 ↗
43. Determination of corrosion inhibition effects of amino acids: quantum chemical and molecular dynamic simulation study10.1016/j.jtice.2015.06.009 ↗
44. High-performance one and two-dimensional doped polypyrrole nanostructure for polymer solar cells applications10.1007/s10854-022-08006-1 ↗
45. Enhancement of spectroscopic, thermal, electrical and morphological properties of polyethylene oxide/carboxymethyl cellulose blends: combined FT-IR/DFT10.1016/j.vacuum.2018.10.066 ↗