journal article·2023-03Open access

Effect of Na2O content on wettability, crystallization and performances of sealing glass

Chenqian Yang, Jintao Bai, Gang Wang, Hui Wang, Shenghua Ma

Abstract

As an encapsulation material, glass has been used in electronic encapsulation, aerospace, and fuel cell applications due to its ease of fabrication, heat resistance, and stability. Thereinto, shear strength is one of the significant criteria for evaluating sealing glass. Nevertheless, shear strength is frequently influenced by the wettability of glass and interfacial interactions. Thus, the effect of Na2O content on the characteristic glass temperature, wettability, and crystallization was investigated to promote shear strength. Due to the fluxing effect of Na2O, the characteristic temperature points tend to drop as its concentration increases from 3 wt% to 12 wt%, and the wettability increases. Furthermore, Na2O promotes the precipitation of more types of lead-containing crystals in sealing glasses. With the sodium content of the glass reaching 12 wt% showed the best properties that shear strength of 326 MPa. The sodium-containing sealed glass was securely attached at the interface after being co-sintered with the Si substrate. This implies that the lead-containing crystalline phase will promote shear strength and improve the sealing ability of the glass. This gives sealing glass great potential for application in electronic packaging fields.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Glass properties and applications · Luminescence Properties of Advanced Materials · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Investigation of the melting characteristic, forming regularity and thermal behavior in lead-free V2O5–B2O3–TeO2 low temperature sealing glass10.1016/j.matlet.2011.09.037 ↗
2. Investigation on the effects of low-temperature anodic bonding and its reliability for MEMS packaging using destructive and non-destructive techniques10.1007/s10854-017-7908-0 ↗
3. A review on microholes formation in glass-based substrates by electrochemical discharge drilling for MEMS applications10.1080/10910344.2022.2044857 ↗
4. Tin-based solder bonding for MEMS fabrication and packaging applications10.1088/0960-1317/14/6/009 ↗
5. Vacuum packaging for microsensors by glass-silicon anodic bonding10.1016/0924-4247(94)80003-0 ↗
6. Low-temperature solid-state bonding using hydrogen radical treated solder for optoelectronic and MEMS packaging10.1149/06405.0267ecst ↗
7. Low temperature wafer-level bonding for hermetic packaging of 3D microsystems10.1088/0960-1317/21/7/075006 ↗
8. Bonding-Based wafer-level vacuum packaging using atomic hydrogen pre-treated Cu bonding frames10.3390/mi9040181 ↗
9. Wafer-level hermetic MEMS packaging by anodic bonding and its reliability issues10.1016/j.microrel.2014.02.001 ↗
10. Application of Au-Sn eutectic bonding in hermetic radio-frequency microelectromechanical system wafer level packaging10.1007/BF02690529 ↗
11. Argon ion beam current dependence of Si-Si surface activated bonding10.3390/ma15093115 ↗
12. Hydrophilic direct bonding of MgO/MgO for high-temperature MEMS devices10.1109/ACCESS.2020.2985750 ↗
13. Void-free room-temperature silicon wafer direct bonding using sequential plasma activation10.1143/JJAP.47.2526 ↗
14. Glass frit jetting for advanced wafer-level hermetic packaging10.3390/ma15082786 ↗
15. Anomalous elastic behaviour of xSrO-10PbO-(90-x)B2O3 glass system10.1016/j.jnoncrysol.2016.04.038 ↗
16. The effect of BaO and Al2O3 addition on the crystallization behaviour of cordierite glass ceramics in the presence of V2O5 nucleant10.1016/j.jeurceramsoc.2008.05.026 ↗
17. The role of TiO2, ZrO2, BaO and SiO2 on the mechanical properties and crystallization behavior of fluorapatite–mullite glass–ceramics10.1016/j.jnoncrysol.2012.10.009 ↗
18. The influence of TiO2 content on the properties of glass ceramics: crystallization, microstructure and hardness10.1016/j.ceramint.2013.08.067 ↗
19. Glass transition and crystallization of ZnO-B2O3-SiO2 glass doped with Y2O310.1016/j.ceramint.2018.11.110 ↗
20. Effects of Cr2O3 and CaF2 on the structure, crystal growth behavior, and properties of augite-based glass ceramics10.1016/j.jeurceramsoc.2019.05.060 ↗
21. Sintering, crystallization, and properties of CaO doped cordierite-based glass–ceramics10.1016/j.jallcom.2007.01.036 ↗
22. Effect of alkali metal Oxides on viscosity and crystallization of the MgO–Al2O3–SiO2 glasses10.1016/j.physb.2013.01.039 ↗
23. Novel approach to studying influences of Na2O and K2O additions on viscosity and thermodynamic properties of BF slags10.1007/s11663-019-01565-5 ↗
24. The effect of additives on the crystallization and sintering of 2MgO-2Al2O3-5SiO2 glass-ceramics10.1007/BF01159312 ↗
25. Characterization on melt-derived bioactive glass powder from SiO2-CaO-Na2O-P2O5 system10.1016/j.jnoncrysol.2017.01.040 ↗
26. Molecular dynamics simulation of thermodynamic and structural properties of silicate glass: effect of the alkali oxide modifiers10.1016/j.jnoncrysol.2016.06.030 ↗
27. Nucleation inhibition despite lower glass viscosities? - effect of the B2O3, Na2O and K2O addition on the crystallization behavior of lithium disilicate glasses10.1016/j.ceramint.2017.04.134 ↗
28. Joining of sintered silicon carbide ceramics using sodium borosilicate glass as the solder10.1111/j.1744-7402.2011.02711.x ↗
29. Comparison between barium and strontium-glass composites for sealing SOFCs10.1016/j.jeurceramsoc.2005.08.002 ↗
30. A low silica, barium borate glass–ceramic for use as seals in planar SOFCs10.1016/j.jnoncrysol.2008.07.044 ↗
31. Effect of integrated nutrient management on growth and yield of pigeon pea (Cajanus cajan) in changing climatic condition of Bihar10.18805/LR-3968 ↗
32. Low Li2O content study in Li2O-Al2O3-SiO2 glass-ceramics10.1016/j.jeurceramsoc.2019.07.032 ↗
33. Understanding the structural origin of crystalline phase transformations in nepheline (NaAlSiO4)-based glass-ceramics10.1111/jace.14845 ↗
34. Preparation of glass-ceramics with diopside as the main crystalline phase from low and medium titanium-bearing blast furnace slag10.1016/j.ceramint.2017.09.019 ↗
35. Effect of nucleation temperatures and time on crystallization behavior and properties of Li2O–Al2O3–SiO2 glasses10.1016/j.matchemphys.2005.09.060 ↗
36. Microstructure, properties and oxidation behavior of the glass–ceramic based coating on near-α titanium alloy10.1016/j.surfcoat.2009.02.016 ↗
37. Influence of brick pattern interface structure on mechanical properties of continuous carbon fiber reinforced lithium aluminosilicate glass–ceramics matrix composites10.1016/j.jeurceramsoc.2011.08.021 ↗
38. Effect of boron doping on fracture behavior of carbon fiber reinforced lithium aluminosilicate glass ceramics matrix composites10.1016/j.jeurceramsoc.2016.05.015 ↗
39. Oxidation protection of commercial-purity titanium by Na2O–CaO–SiO2 and Na2O–CaO–Al2O3–SiO2 glass–ceramic coatings10.1016/j.ceramint.2014.08.075 ↗
40. Effects of Al/Na and heat treatment on the structure and properties of glass ceramics from molten blast furnace slag10.1016/j.ceramint.2019.04.064 ↗
41. Viscosities of CaO–SiO2–Al2O3–(R2O or RO) melts10.2355/isijinternational.46.352 ↗
42. Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells10.1016/j.apsusc.2016.03.089 ↗
43. Effect of Pb-Te-Si-O glasses on Ag thick-film contact in crystalline silicon solar cells10.1088/1755-1315/300/4/042038 ↗
44. The effect of TiO2 and B2O3 on sintering behavior and crystallization behavior of SrO–BaO–B2O3–SiO2 glass-ceramics10.1016/j.ceramint.2021.11.259 ↗
45. A study of interfacial wettability of glass spreading on a silicon substrate10.1007/s11664-022-09683-8 ↗
46. Effect of oxides doping on properties of V2O5–P2O5–Bi2O3 glass
47. Effect of Bi2O3 content on the structure and properties of Bi2O3–B2O3–BaO–ZnO glass10.1016/j.jnoncrysol.2021.121211 ↗
48. The effect of alkali metal oxide on the properties of borosilicate fireproof glass: structure, thermal properties, viscosity, chemical stability10.1016/j.ceramint.2021.03.298 ↗
49. Comprehensive study on structural and optical properties of Tm2O3 doped zinc silicate based glass–ceramics10.1007/s10854-018-0115-9 ↗
50. Effect of Te-based glass on contact formation and electrical properties in Si solar cells10.1016/j.jallcom.2020.154500 ↗
51. Glass formation and physical properties of chalcogenide glasses in Ge–S–Pb system10.1016/j.infrared.2014.01.003 ↗
52. The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates10.1016/j.matdes.2021.109453 ↗
53. Study of photoluminescence quenching in Er3+-doped tellurite glasses10.1016/j.optmat.2010.02.006 ↗
54. Structural and spectroscopic studies of V2O5 incorporated lithium-bismuth-boro-tellurite glass ceramics10.1016/j.matpr.2022.04.154 ↗
55. Processing and optical characterization of lead calcium titanate borosilicate glass doped with germanium10.1016/j.jpcs.2017.12.038 ↗
56. Dependence of glass transition on the structure in Bi B Zn oxide glass10.1016/j.jallcom.2018.01.188 ↗
57. Structural, optical and glass transition studies on Nd3+-doped lead bismuth borate glasses10.1016/S0921-4526(03)00080-2 ↗
58. The relationship between the structure and thermal properties of Bi2O3–ZnO–B2O3 glass system10.1155/2021/2321558 ↗
59. Physical properties of B2O3–TeO2–Bi2O3 glass system10.1016/j.jnoncrysol.2018.06.002 ↗
60. Vibrational, thermal and optical studies of 30TeO2-39.5B2O3-(30-x)ZnO-xLi2O-0.5 V2O5 (0 ≤ x ≤ 30 mol%) glass system10.1016/j.jnoncrysol.2021.120875 ↗
61. Glass formation and spectral studies of PbO and Bi2O3 modified TeO2 -ZnO glasses10.1016/j.jnoncrysol.2017.12.053 ↗
62. Fourier transform infrared spectroscopic characterization of kaolinite from Assam and Meghalaya, northeastern India10.4236/jmp.2010.14031 ↗
63. Crystallization, structure and characterization of MgO–Al2O3–SiO2–P2O5 transparent glass-ceramics with high crystallinity10.1016/j.jnoncrysol.2017.10.028 ↗
64. Spectroscopic investigation on thermally stable Dy3+ doped zinc phosphate glasses for white light emitting diodes10.1016/j.jallcom.2016.07.024 ↗
65. Topological principles of borosilicate glass chemistry10.1021/jp208796b ↗
66. Temperature effects on structure and dynamics in borate and borosilicate liquids: high-resolution and high-temperature NMR results10.1111/j.1151-2916.1996.tb08969.x ↗
67. Physical and spectroscopic properties of multi-component Na2O–PbO–Bi2O3–SiO2 glass ceramics with Cr2O3 as nucleating agent10.1016/j.optmat.2015.05.048 ↗
68. Radiation shielding traits of bismuth–cadmium–barium-borate glasses: role of lead activation10.1016/j.jpcs.2022.110597 ↗
69. A review of the structures of oxide glasses by Raman spectroscopy10.1039/C5RA13043C ↗
70. Physical, structural, thermal, and optical spectroscopy studies of TeO2–B2O3–MO3–ZnO–R2O (R=Li, Na, and K)/MO (M=Mg, Ca, and Pb) glasses10.1016/j.jallcom.2016.08.180 ↗
71. Structure and high temperature physical properties of glass seal materials in solid oxide electrolysis cell10.1016/j.jpowsour.2012.03.087 ↗
72. Coexistence of structure I and II hydrates formed from a mixture of methane and ethane gases10.1139/p03-038 ↗
73. An analytical investigation on characterizing the properties of glass composition for crystalline silicon solar cells based on the digital microsystem measurement technology10.1016/j.solmat.2022.111814 ↗
74. Sealing performance of tempered vacuum glazing with silver oxide system low melting solder10.1016/j.matchemphys.2021.125202 ↗
75. Effects of Na+ substitution Cs+ on the microstructure and thermal expansion behavior of ceramic derived from geopolymer10.1111/jace.14968 ↗
76. Effect of Na/K ratio on structure evolution, dielectric and energy storage properties of potassium sodium niobate-based borate glass-ceramics10.1016/j.jnoncrysol.2022.121930 ↗
77. Lorentzian dominated lineshapes and linewidths for Raman symmetric stretch peaks (800–1200 cm−1) in Qn (n = 1–3) species of alkali silicate glasses/melts10.1016/j.jnoncrysol.2018.01.018 ↗