journal article·2023-03Open access

As-cast microstructure and homogenization kinetics of a typical hard-to-deform Ni-base superalloy

Lei Jia, Heng Cui, Shufeng Yang, Shaomin Lv, Xingfei Xie, Jinglong Qu

Abstract

In this paper, the as-cast microstructure, microsegregation, and the kinetics of (γ+γ′) eutectic phase and Laves phase dissolution in GH4151 alloy were studied by the optical microscope (OM), scanning electron microscope (SEM), electron probe microanalysis (EPMA), differential scanning calorimetry (DSC), and high-temperature water quenching text. The results show that W and Al elements are segregated into the dendrites arm, while Mo, Nb, and Ti are segregated into the interdendritic region. The initial melting point temperature of the MB2 phase was near 1100 °C, the redissolution temperature range of γ′ phase is 1130–1160 °C, the obvious dissolution temperature of Laves phase was above 1145 °C and the γ + γ′ eutectic phase was redissolved obviously above 1165 °C. Based on the JMAK analysis, the activation energies of dissolution of Laves phase (266.3 kJ/mol) and γ+γ′ phase (279.5 kJ/mol) are close to the activation energy for the diffusion of Mo in Ni (288.15 kJ/mol) and Ti in Ni (288.15 kJ/mol), respectively. The back-diffusion of Mo and Ti into austenite is controlling the micro-mechanism for the dissolution of Laves phase and (γ+γ′) eutectic phase, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗
2. Role of carbides on hot deformation behavior and dynamic recrystallization of hard-deformed superalloy U720Li10.1016/j.msea.2021.141293 ↗
3. Solving recent challenges for wrought Ni-base superalloys10.1007/s11661-020-05773-6 ↗
4. Effect of Ti addition on high-temperature oxidation behavior of Co–Ni-based superalloy10.1007/s42243-020-00379-z ↗
5. Cracking mechanism in as-cast GH4151 superalloy ingot with high γ′; phase content10.1016/S1003-6326(20)65413-9 ↗
6. Microstructure and mechanical behaviour of an advanced powder metallurgy nickel base superalloy processed through hot isostatic pressing route for aerospace applications10.1016/j.msea.2020.140254 ↗
7. Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis10.1016/j.msea.2011.01.044 ↗
8. Homogenization kinetics of a typical nickel-based superalloy10.1016/j.jallcom.2019.04.147 ↗
9. Investigation on sub-solvus recrystallization mechanisms in an advanced gamma-gamma' nickel-based superalloy GH415110.3390/ma13204553 ↗
10. Segregation and homogenization for a new nickel-based superalloy
11. Element segregation and solidification behavior of a Nb, Ti, Al Co-strengthened superalloy ЭК15110.1007/s40195-019-00894-3 ↗
12. Characterization of localized deformation near grain boundaries of superalloy René-104 at elevated temperature10.1016/j.msea.2014.03.048 ↗
13. Breaking thermodynamic and kinetic barriers in superalloy homogenization process by electropulsing to improve mechanical properties10.1016/j.jallcom.2021.159854 ↗
14. Study on microsegregation and homogenization process of a novel nickel-based wrought superalloy10.1016/j.jmrt.2022.06.088 ↗
15. The influence of high temperature annealing and creep on the microstructure and chemical element distribution in the γ, γ′ and TCP phases in single crystal Ni-base superalloy10.1016/j.jallcom.2017.10.076 ↗
16. Microstructure evolution of high-performance Ni-base superalloy GTD-111 with heat treatment parameters10.1016/j.jmatprotec.2005.04.021 ↗
17. The mechanism of crack generation and propagation in the new casting alloy GH4151 during cogging10.1007/s00170-021-07609-y ↗
18. Effect of eutectic characteristics on hot tearing of cast superalloys10.1007/s11665-019-04230-9 ↗
19. Microstructure and homogenization process of as-cast GH4169D alloy for novel turbine disk10.1007/s12613-019-1802-0 ↗
20. Designing homogenization–solution heat treatments for single crystal superalloys10.1016/j.msea.2010.05.019 ↗
21. Interdiffusion coefficients of alloying elements in a typical Ni-based superalloy10.1016/j.vacuum.2019.108875 ↗
22. Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ′-cobalt-based superalloy10.1007/s12613-019-1727-7 ↗
23. Incipient melting phase and its dissolution kinetics for a new superalloy10.1016/S1003-6326(20)65364-X ↗
24. Microstructural characterization of Ni-base superalloy as-cast single crystal (CMSX-4)10.1007/s40962-020-00496-1 ↗
25. Microstructural evolution and compositional homogenization of a low Re-bearing Ni-based single crystal superalloy during through progression of heat treatment10.1016/j.matdes.2017.12.020 ↗
26. Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy10.1016/j.vacuum.2018.05.019 ↗
27. Solidification and segregation behaviors of superalloy IN718 at a slow cooling rate10.3390/ma11122398 ↗
28. Microsegregation of a new Ni-Co-based superalloy prepared through electron beam smelting and its homogenization treatment10.1016/j.jmrt.2020.03.068 ↗
29. Effects of homogenization treatment on the microsegregation of a Ni–Co based superalloy produced by directional solidification10.1007/s40195-021-01192-7 ↗
30. The role of boron in modifying the solidification and microstructure of nickel-base alloy U720Li10.1016/j.jallcom.2016.05.331 ↗
31. Differential thermal analysis of nickel-base superalloys
32. Role of carbon in modifying solidification and microstructure of a Ni-based superalloy with high Al and Ti contents10.1007/s42243-020-00408-x ↗
33. Effects of boron or carbon on solidification behavior of Co-Ni-Al-W-based superalloys10.1016/j.jallcom.2021.161965 ↗
34. Homogenizing a nickel-based superalloy: thermodynamic and kinetic simulation and experimental results10.1007/s11663-009-9227-1 ↗
35. Aging kinetics of 17-4 PH stainless steel10.1016/j.matchemphys.2009.02.049 ↗
36. EBSD study of a hot deformed austenitic stainless steel10.1016/j.msea.2012.01.037 ↗
37. Quantitative analysis of homogenization treatment of INCONEL718 superalloy10.1016/S1003-6326(11)60814-5 ↗
38. Analysis of the homogenization of a nickel-base superalloy10.1016/j.scriptamat.2004.05.049 ↗
39. Diffusion in solids: field theory, solid-state principles, and applications
40. Solute diffusion in metals: larger atoms can move faster10.1103/PhysRevLett.92.085901 ↗
41. Chemical diffusion of niobium in nickel10.1016/0022-3115(96)80010-9 ↗
42. Microstructure transformation during homogenization treatment in as-cast GH742 alloy