Microstructure evolution and mechanical properties of high-strength Mg-Gd-Y-Zn-Mn alloy processed by asymmetric hot rolling
Source abstract
Abstract
Asymmetric hot rolling was used to fabricate the high-strength Mg-9Gd-4Y–1Zn-0.8Mn (wt.%) alloys, which is strengthened by the lamellar long-period stacking ordered (LPSO) phases inside grains and the block-shaped LPSO phases surrounding grain boundaries. The reduction in total thickness shows a significant impact on the microstructure, texture, and mechanical properties of the alloy sheets. By keeping the velocity ratio between the top and lower rollers at 1.3, the shear strain is introduced all across the sheet thickness. The as-rolled sample exhibits a bimodal-grained structure made up of fine recrystallized (DRXed) grains with relatively random orientation and coarse elongated non-recrystallized (unDRXed) grains with intense basal texture and profuse substructure. As rolling strain increases, the volume fraction of the DRXed region and the basal texture intensity of the unDRXed region gradually increase. The dominating prismatic slip as well as the moderate basal slip and pyramidal slip are activated during rolling. The triggering of prismatic slip, among the activated multiple slip systems, results in the development of [101¯0]//RD texture component at high strains. The alloy sheet that underwent severer rolling strain (56.3%R sample) shows higher ultimate tensile strength (411 MPa) and tensile yield strength (348 MPa) but lower elongation to failure (3.5%). The dominant strengthening mechanisms for the preferable mechanical properties should be grain boundary strengthening of fine DRXed grains, texture strengthening of coarse elongated unDRXed grains, short-fiber strengthening of block-shaped LPSO phases, and dispersion strengthening of profuse lamellar LPSO phases and dense tiny Mg5(Gd, Y) particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of gadolinium on the deformation and recrystallization behavior of magnesium crystals10.1016/j.actamat.2022.118312 ↗
2. Hot deformation behavior and microstructure evolutions of as-forged Mg-Gd-Y-Zn-Zr alloy10.1016/j.jmrt.2022.10.013 ↗
3. Rapidily solidified powder metallurgy Mg97Zn1Y2 alloys with excellent tensile yield strength above 600 MPa10.2320/matertrans.42.1172 ↗
4. Dilute long period stacking/order (LPSO)-variant phases along the composition gradient in a Mg-Ho-Cu alloy10.1016/j.jma.2021.11.007 ↗
5. Synergistic effect of LPSO and eutectic phase on mechanical properties of Mg-Gd-Nd-Zn-Zr alloy during equal channel angular pressing10.1016/j.jmrt.2021.09.058 ↗
6. Recent advances in LPSO-containing wrought magnesium alloys: relationships between processing, microstructure, and mechanical properties
7. Deformation behavior of ultra-strong and ductile Mg-Gd-Y-Zn-Zr alloy with bimodal microstructure10.1007/s11661-018-4507-5 ↗
8. Effect of Zn additions on the age-hardening of Mg–2.0Gd–1.2Y–0.2Zr alloys10.1016/j.actamat.2007.02.036 ↗
9. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
10. Development of high strength sand cast Mg–Gd–Zn alloy by co-precipitation of the prismatic β′ and β1 phases10.1016/j.matchar.2019.04.036 ↗
11. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
12. Microstructure evolution and mechanical properties of industrial scale samples of Mg–Gd–Y–Zn–Zr alloy after repetitive upsetting-extrusion process10.1016/j.jmrt.2022.10.038 ↗
13. Abnormal texture formation and mechanical anisotropy of pre-aging extruded Mg-Gd-Y-Zn-Zr alloy with large-scale10.1016/j.jmrt.2022.08.069 ↗
14. Inhomogeneous microstructure and mechanical anisotropy of multi-directional forged Mg-Gd-Y-Zn-Ag-Zr alloy10.1016/j.msea.2021.140853 ↗
15. Improving strength and ductility of Mg–Gd–Y–Zn–Zr alloy simultaneously via extrusion, hot rolling and ageing10.1016/j.msea.2015.07.032 ↗
16. Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing10.1016/j.scriptamat.2011.01.042 ↗
17. Asymmetric cold rolling: a technique for achieving non-basal textures in AZ91 alloy10.1016/j.matlet.2019.04.087 ↗
18. Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rolling10.1016/j.scriptamat.2006.09.034 ↗
19. Microstructure and mechanical properties of large-scale Mg-Gd-Y-Zn-Mn alloys prepared through semi-continuous casting10.1016/j.jmst.2020.04.013 ↗
20. Achieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatment10.1016/j.msea.2020.139635 ↗
21. Crystallographic classification of kink bands in an extruded Mg–Zn–Y alloy using intragranular misorientation axis analysis10.1016/j.actamat.2012.12.026 ↗
22. Stability of twins in Mg alloys – a short review10.1016/j.jma.2020.02.002 ↗
23. The effects of induction quenching and pre-strain levels on twin behavior in extruded ZK21 magnesium alloy10.1016/j.msea.2018.10.090 ↗
24. Room temperature deformation-induced solute segregation and its impact on twin boundary mobility in a Mg-Y alloy10.1016/j.scriptamat.2021.114375 ↗
25. Microstructure and mechanical properties of extruded Mg–Gd–Y–Zn alloy with Mn or Zr addition10.1007/s10853-019-03607-4 ↗
26. Microstructure and mechanical properties of rolled sheets of Mg–Gd–Y–Zn–Zr alloy: as-cast versus as-homogenized10.1016/j.jallcom.2012.03.023 ↗
27. Unraveling the effect of deformation-induced phase transformation on microstructure and micro-texture evolution of a multi-axially forged Mg-Gd-Y-Zn-Zr alloy containing the LPSO phase10.1016/j.jmrt.2021.09.035 ↗
28. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
29. The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys10.1016/j.jallcom.2016.10.222 ↗
30. Reasonable utilization of {10-12} twin for optimizing microstructure and improving mechanical property in a Mg-Gd-Y alloy10.1016/j.matdes.2020.108600 ↗
31. Ultra high-strength Mg–Gd–Y–Zn–Zr alloy sheets processed by large-strain hot rolling and ageing10.1016/j.msea.2012.03.087 ↗
32. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Mn alloy sheets processed by large-strain high-efficiency rolling10.1016/j.msea.2019.01.080 ↗
33. Effects of accumulative rolling reduction on the microstructure characteristic and mechanical properties of Mg-Gd-Y-Zn-Zr sheets processed by hot rolling10.1016/j.msea.2019.138317 ↗
34. The effect of processing parameters on the microstructure and texture evolution of a cup-shaped AZ80 Mg alloy sample manufactured by the rotating backward extrusion10.1016/j.jallcom.2020.156264 ↗
35. Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys10.1016/j.actamat.2017.07.038 ↗
36. Investigation of prism ⟨a⟩ slip in warm-rolled AZ31 alloy10.1007/s11661-011-0800-2 ↗
37. Effects of solute and second-phase particles on the texture of Nd-containing Mg alloys10.1007/s11661-011-1018-z ↗
38. Deformation behavior characterized by reticular shear bands and long chain twins in Mg-Gd-Nd(-Zn)-Zr alloys10.1016/j.jmrt.2021.11.020 ↗
39. Texture optimization on Mg sheets by preparing soft orientations of extension twinning for rolling10.1016/j.msea.2019.06.007 ↗
40. Strain path dependence of texture and property evolutions on rolled Mg-Li-Al-Zn alloy possessed of an asymmetric texture10.1016/j.jallcom.2016.12.205 ↗
41. Formation of an abnormal texture in Mg-Gd-Y-Zn-Mn alloy and its effect on mechanical properties by altering extrusion parameters10.1016/j.msea.2021.142270 ↗
42. Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy10.1016/j.jmst.2020.01.018 ↗
43. Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy10.1016/j.actamat.2010.07.050 ↗
44. Plastic deformation behavior of Mg12YZn with 18R long-period stacking ordered structure10.1016/j.intermet.2009.07.014 ↗
45. Elastic properties of an Mg–Zn–Y alloy single crystal with a long-period stacking-ordered structure10.1016/j.actamat.2013.06.041 ↗
46. Long-period ordered structure in a high-strength nanocrystalline Mg-1 at% Zn-2 at% Y alloy studied by atomic-resolution Z-contrast STEM10.1016/S1359-6454(02)00191-X ↗
47. Diffusion behaviour and mechanical properties of binary Mg–Gd system10.1016/j.intermet.2021.107171 ↗
48. Transmission electron microscopy study of stacking faults and their interaction with pyramidal dislocations in deformed Mg10.1016/j.actamat.2009.08.066 ↗