The effect of surface treatment and orientation on fatigue crack growth rate and residual stress distribution of wire arc additively manufactured low carbon steel components
Source abstract
Abstract
The directed energy deposition (DED) processes, such as laser metal deposition or Wire Arc Additive Manufacturing (WAAM), are gradually becoming the preferred method for fabrication of large-scale components using metal additive manufacturing (AM) technology. In this work, the possibility of fatigue life enhancement in WAAM built low carbon steel components, by means of rolling and laser shock peening surface treatment techniques, was investigated. A series of fatigue crack propagation tests were performed on surface treated ER70S-6 and ER100S-1 WAAM built specimens, and the results were analysed and compared with the untreated materials tested under the same loading conditions. The obtained results were interpreted in terms of the sensitivity of the cracking behaviour to the specimen orientation and extraction location. Furthermore, the residual stress profiles were measured, before and after applying the surface treatment techniques, and the effects of locked-in residual stresses on the fatigue performance of WAAM built components were discussed. Finally, a detailed texture analysis was performed on the surface treated and untreated regions of both WAAM built materials considered in this work. The obtained results from this study provide an insight into the advantages and disadvantages of various surface treatment techniques for fatigue life enhancement of WAAM built components with the view to extend the application of this advanced manufacturing technology to a wider range of industrial applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Surface Treatment and Residual Stress · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Effect of surface mechanical treatments on the microstructure-property-performance of engineering alloys
2. Ersdal, G., Sharp, J. V. & Stacey, A. Ageing and life extension of offshore structures: the challenge of managing structural integrity. Available at: https://books.google.no/books?id=tzB6DwAAQBAJ&pg=PA162&lpg=PA162&dq=grinding+life+extension+steels&source=bl&ots=mi7WNDonqm&sig=ACfU3U0IKLdC3UtdrW3JZXUPNkCiFC2eLQ&hl=en&sa=X&ved=2ahUKEwi4mpzh6sf3AhWuS_EDHTA-BQ4Q6AF6BAgPEAM#v=onepage&q=grinding life extens. (Accessed: 5th May 2022).
3. The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy10.1016/j.msea.2009.08.045 ↗
4. Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening10.3390/ma7127925 ↗
5. Experimental investigation and fatigue life prediction for 7475-T7351 aluminum alloy with and without shot peening-induced residual stresses10.1016/j.actamat.2011.03.013 ↗
6. Influence of shot peening on the fatigue life of laser hardened 17-4PH steel10.1016/j.ijfatigue.2010.10.010 ↗
7. Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ8010.1016/j.scriptamat.2004.11.003 ↗
8. Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints10.1016/j.ijfatigue.2006.05.007 ↗
9. A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints10.1016/j.ijfatigue.2008.03.029 ↗
10. Studies on laser peening of spring steel for automotive applications10.1016/j.optlaseng.2011.11.013 ↗
11. Fatigue properties of specimens similar to components deep rolled under optimized conditions10.1016/0142-1123(87)90087-9 ↗
12. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti–6Al–4V at elevated temperatures up to 550 °C10.1016/j.ijfatigue.2012.03.008 ↗
13. Deep cold rolling of features on aero-engine components10.1016/j.procir.2014.04.059 ↗
14. On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti–6Al–4V at ambient and elevated temperatures10.1016/S0921-5093(03)00069-8 ↗
15. Effect of combined plasma-carburizing and deep-rolling on notch fatigue property of Ti-6Al-4V alloy10.1016/j.msea.2008.09.008 ↗
16. Application of vibropeening on aero – engine component10.1016/j.procir.2014.04.072 ↗
17. Current status and perspectives on wire and Arc Additive manufacturing (WAAM)10.3390/ma12071121 ↗
18. Invited review article: strategies and processes for high quality wire arc additive manufacturing
19. Residual stresses and distortions in welded structures: a perspective for engineering applications
20. Welding residual stresses and effects on fracture in pressure vessel and piping components: a millennium review and beyond10.1115/1.556189 ↗
21. Residual stress distributions and their influence on fatigue lifetimes10.1016/S0142-1123(01)00133-5 ↗
22. Rauch · 2021
23. Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement
24. Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components10.1016/j.scriptamat.2016.10.031 ↗
25. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling10.1016/j.jmatprotec.2013.04.012 ↗
26. Control of residual stress and distortion in aluminium wire + arc additive manufacture with rolling
27. An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition10.1016/j.msea.2020.139179 ↗
28. Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components10.1080/02670836.2016.1142704 ↗
29. Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel10.1007/s11740-014-0539-x ↗
30. Laser shock peening and its effects on microstructure and properties of additively manufactured metal alloys: a review10.1088/2631-8695/ab9b16 ↗
31. Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening10.1016/j.jallcom.2018.02.353 ↗
32. Effects of heat treatment combined with laser shock peening on wire and arc additive manufactured Ti17 titanium alloy: microstructures, residual stress and mechanical properties10.1016/j.surfcoat.2020.125908 ↗
33. Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening10.1016/j.jallcom.2018.04.029 ↗
34. Manikandan · 2019 · 509
35. Lincoln Electric Company, T. lincoln ® ER70S-6 welding positions typical applications.
36. 2014
37. A review of present status and challenges of using additive manufacturing technology for offshore wind applications10.1016/j.prostr.2019.08.005 ↗
38. Investigation of mechanical and fracture properties of wire and arc additively manufactured low carbon steel components10.1016/j.tafmec.2020.102685 ↗
39. Standard test method for measurement of fatigue crack growth rates
40. ASTME-1820-11: standard test method for measurement of fracture toughness
41. Numerical analysis of surface rolling effects on fatigue life enhancement of Wire Arc additively manufactured parts10.1142/S175697372146001X ↗
42. SALSA—a new instrument for strain imaging in engineering materials and components10.1016/j.msea.2006.04.083 ↗
43. Residual stress measurements in offshore wind monopile weldments using neutron diffraction technique and contour method10.1016/j.tafmec.2018.06.001 ↗
44. Pynn · 2009 · 15
45. Introduction to the characterization of residual stress by neutron diffraction. Introd. To charact
46. 2003
47. 2008
48. Fatigue crack growth rates for offshore wind monopile weldments in air and seawater: SLIC inter-laboratory test results10.1016/j.matdes.2016.10.070 ↗
49. Fatigue crack growth behaviour of wire and arc additively manufactured ER70S-6 low carbon steel components
50. Experimental investigation of the fatigue crack growth behavior in wire arc additively manufactured ER100S-1 steel specimens
51. Effect of interlayers and scanning strategies on through-thickness residual stress distributions in additive manufactured ferritic-austenitic steel structure10.1016/j.msea.2018.12.078 ↗
52. Through-thickness distributions of residual stresses in an 80 mm thick weld using neutron diffraction and contour method10.1007/s10853-014-8638-9 ↗
53. Understanding and designing post-build rolling for mitigation of residual stress and distortion in wire arc additively manufactured components10.1016/j.matdes.2021.110335 ↗
54. Studies on fatigue life enhancement of pre-fatigued spring steel specimens using laser shock peening10.1016/j.matdes.2013.08.104 ↗
55. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel10.1016/j.actamat.2010.06.010 ↗
56. Application of EBSD to analysis of microstructures in commercial steels10.1179/174328406X130948 ↗