journal article·2023-07Open access

Effect of cooling rate on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion

Tianyi Han, Jiaying Chen, Zongfan Wei, Nan Qu, Yong Liu, Danni Yang, Sicong Zhao, Zhonghong Lai, Meng Jiang, Jingchuan Zhu

Abstract

The mechanical properties and serviceability of the alloy fabricated by laser powder bed fusion (L-PBF) additive manufacturing (AM) strongly depend on the phase composition and microstructure, which are affected by the thermal condition of the process, such us cooling rate. In this study, AlCrFe2Ni2 medium entropy alloy (MEA) was fabricated by L-PBF under varying cooling rate via changing process parameters. The phase transformation, microstructure and mechanical properties were experimentally investigated using X-ray diffraction (XRD), scanning transmission electron microscopy (TEM), scanning electron microscope (SEM) and electron backscatter diffraction (EBSD). The cooling rate was numerically calculated using a well-tested multi-physic thermal fluid model. The results showed that cooling rate had a significant effect on phase composition, microstructure and mechanical properties. The as-built MEA with lower cooling rate showed a nano-size structure composed of BCC and ordered B2 phases and a higher yield strength of 2055 MPa. While for the higher cooling rate, the as-built MEA showed a homogeneous structure consisted of single ordered B2 phase and a lower yield strength of 1544 MPa. The threshold value of cooling rate for phase transformation was between 4.9×106 K/s and 6.0×106 K/s. Through the strengthening mechanism analysis, it was crucial to achieve the nano-size dual-phase microstructure by manipulating cooling for obtaininng desirable mechanical properties in L-PBF AMed AlCrFe2Ni2 MEA.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
3. High-entropy alloys: basic concepts10.1016/B978-0-12-816067-1.00002-3 ↗
4. Empirical design of single phase high-entropy alloys with high hardness10.1016/j.intermet.2014.10.010 ↗
5. High hardness dual-phase high entropy alloy thin films produced by interface alloying10.1016/j.scriptamat.2018.11.004 ↗
6. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
7. Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high/medium entropy alloys10.1016/j.actamat.2019.04.017 ↗
8. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
9. High temperature strengthening via nanoscale precipitation in wrought CoCrNi-based medium-entropy alloys10.1016/j.msea.2020.140213 ↗
10. Cross-kink unpinning controls the medium- to high-temperature strength of body-centered cubic NbTiZr medium-entropy alloy10.1016/j.scriptamat.2021.114367 ↗
11. Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys10.1016/j.jallcom.2014.11.012 ↗
12. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
13. A novel supersaturated medium entropy alloy with superior tensile properties and corrosion resistance10.1016/j.scriptamat.2020.05.023 ↗
14. High-temperature oxidation behaviour of CoCrNi medium-entropy alloy10.1016/j.corsci.2020.108755 ↗
15. Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.110.1016/j.msea.2018.03.078 ↗
16. Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy10.1016/j.scriptamat.2018.07.022 ↗
17. A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties10.1016/j.jallcom.2018.08.176 ↗
18. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.110.1016/j.jmst.2020.04.073 ↗
19. Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.intermet.2016.12.018 ↗
20. Simultaneous strength-ductility enhancement of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy by cryo-rolling and annealing10.1038/s41598-018-21385-y ↗
21. Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy10.1016/j.scriptamat.2018.07.022 ↗
22. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
23. Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.msea.2021.142558 ↗
24. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
25. The role of side-branching in microstructure development in laser powder-bed fusion10.1038/s41467-020-14453-3 ↗
26. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges10.1063/1.4937809 ↗
27. Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments10.1080/17452759.2020.1779999 ↗
28. Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel10.1016/j.matdes.2020.109385 ↗
29. A digital twin for rapid qualification of 3D printed metallic components10.1016/j.apmt.2018.11.003 ↗
30. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
31. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting10.1007/s11665-013-0658-0 ↗
32. Multi-laser powder bed fusion of Ti–6Al–4V alloy: defect, microstructure, and mechanical property of overlap region10.1016/j.msea.2020.140644 ↗
33. Thermo-hydrogen refinement of microstructure to improve mechanical properties of Ti–6Al–4V fabricated via laser powder bed fusion10.1016/j.msea.2021.140980 ↗
34. Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing
35. Microstructure and mechanical properties of Zr-modified aluminum alloy 5083 manufactured by laser powder bed fusion
36. A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting10.1016/j.msea.2021.141638 ↗
37. Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition10.1016/j.msea.2021.141679 ↗
38. Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion
39. Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys10.1016/j.actamat.2017.05.003 ↗
40. Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion10.1016/j.msea.2019.138081 ↗
41. Microstructure formed during selective laser melting of IN738LC in keyhole mode10.1016/j.jallcom.2019.03.419 ↗
42. An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel10.1007/s11661-014-2549-x ↗
43. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
44. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel10.1016/j.matdes.2018.12.006 ↗
45. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
46. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
47. Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting
48. Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing
49. Segregation enabled outstanding combination of mechanical and corrosion properties in a FeCrNi medium entropy alloy manufactured by selective laser melting10.1016/j.jmst.2021.05.018 ↗
50. Laser powder bed fusion of high-strength Sc/Zr-modified Al–Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior10.1016/j.jmst.2021.03.069 ↗
51. Laser powder bed fusion of Zr-modified Al–Cu–Mg alloy: crack-inhibiting, grain refinement, and mechanical properties10.1016/j.msea.2022.142618 ↗
52. Making selective-laser-melted high-strength Al–Mg–Sc–Zr alloy tough via ultrafine and heterogeneous microstructure10.1016/j.scriptamat.2021.114052 ↗
53. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
54. Unique strength-ductility balance of AlCoCrFeNi2.1 eutectic high entropy alloy with ultra-fine duplex microstructure prepared by selective laser melting10.1016/j.jmst.2021.10.013 ↗
55. Ultra strong and ductile eutectic high entropy alloy fabricated by selective laser melting10.1016/j.jmst.2021.08.015 ↗
56. Influence of synthesis method on microstructure and mechanical behavior of Co-free AlCrFeNi medium-entropy alloy10.1016/j.intermet.2019.02.006 ↗
57. Computation of stability, elasticity and thermodynamics in equiatomic AlCrFeNi medium-entropy alloys10.1007/s10853-018-2943-7 ↗
58. A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties10.1016/j.matlet.2016.01.096 ↗
59. Refined microstructure and enhanced mechanical properties of AlCrFe2Ni2 medium entropy alloy produced via laser remelting10.1016/j.jmst.2021.05.033 ↗
60. Metastability in high entropy alloys10.1016/j.scriptamat.2020.05.049 ↗
61. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property10.1016/j.jallcom.2018.02.298 ↗
62. Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys10.1016/j.jallcom.2013.08.176 ↗
63. Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating10.1016/j.apsusc.2020.147205 ↗
64. Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering10.1016/j.actamat.2012.09.036 ↗
65. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗