Formation and aggregation behavior of inclusions in Ni-based alloys with different Mg contents
Source abstract
Abstract
Large non-metallic inclusions affect the mechanical properties and service life of nickel-based superalloys. This study investigates the effects of magnesium elements on non-metallic inclusions in K4169 nickel-based superalloys, exploring the formation mechanisms and aggregation relationships of the inclusions. Four gradients of the magnesium content were used to simulate the erosion of MgO refractories on inclusions in the vacuum induction melting of nickel-based superalloys. The observed inclusions mainly comprised MgO, TiN, MgAl2O4, and MgAl2O4-TiN composites. To study the formation mechanism of inclusions in Ni-based alloys with different Mg contents, the predominance diagram of Mg-Al-Ti-O inclusions in nickel-based superalloy systems was calculated using Factsage thermodynamics software and classical thermodynamics separately. The aggregation behavior of MgAl2O4 and MgO inclusions on the surface of molten nickel-based superalloys was observed in situ under a high-temperature confocal laser scan microscope. The capillary force acting on inclusions in nickel-based superalloys was calculated using the Kralchevsky–Paunov model (K-P model), the calculation was verified with experimental results, and the influencing factors were analyzed. The capillary force acting on inclusions on the surface of molten nickel-based superalloys weakened in the order of MgAl2O4 > MgO > Al2O3, which is the opposite of the order for the force acting on inclusions in molten steel. Minimizing the magnesium content in the alloy is crucial to preventing the formation of large inclusions in nickel-based superalloys, and the use of magnesium-containing materials in the smelting process should thus be avoided.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Effects of grain refinement on cast structure and tensile properties of superalloy K4169 at high pouring temperature10.1007/s41230-016-5124-9 ↗
2. Effects of aluminum and titanium additions on the formation of nonmetallic inclusions in nickel-based superalloys10.1016/j.jallcom.2022.164281 ↗
3. Effect of solution heat treatment on creep properties of a nickel-based single crystal superalloy10.1016/j.jmrt.2021.10.078 ↗
4. Dynamic recrystallization mechanism of as-cast nickel base superalloy N10276 during primary hot working10.1007/s42243-022-00831-2 ↗
5. Effect of W on formation and properties of precipitates in Ni-based superalloys10.1007/s42243-021-00562-w ↗
6. Viscoplastic constitutive model of a nickel-based superalloy under multiaxial loading conditions10.1007/s42243-021-00583-5 ↗
7. Shear thickening polishing of the concave surface of high-temperature nickel-based alloy turbine blade10.1016/j.jmrt.2020.12.112 ↗
8. Preparation of CaO-MgO-ZrO2 refractory and its desulfurization effect on Ni-based alloy in vacuum induction melting (VIM)10.1007/s41779-019-00421-8 ↗
9. Hot cracking behavior of large size GH4742 superalloy vacuum induction melting ingot10.1007/s42243-022-00767-7 ↗
10. Improvement in hydration resistance of CaO granules based on CaO–TiO2, CaO–ZrO2 and CaO–V2O5 systems10.1016/j.matchemphys.2020.123413 ↗
11. Study of the hydration of CaO powder by gas–solid reaction10.1016/j.cemconres.2011.06.014 ↗
12. Fracture toughness, strength and creep of transparent ceramics at high temperature10.1016/j.ceramint.2012.02.028 ↗
13. Study on the structure and mechanical properties of magnesia partially stabilized zirconia during cyclic heating and cooling10.1016/j.matlet.2017.01.135 ↗
14. Comparison of directional solidification of γ-TiAl alloys in conventional Al2O3 and novel Y2O3-coated Al2O3 crucibles10.1016/j.jeurceramsoc.2012.11.006 ↗
15. Characterization of the interaction between molten titanium alloy and Al2O310.1007/BF00356694 ↗
16. Interfacial reaction between nickel-based superalloy K417G and oxide refractories
17. Reaction mechanism between MgO crucible and AerMet100 steel during vacuum induction melting10.1016/j.ceramint.2022.04.257 ↗
18. Study on the stability of different refractories during the melting process of a K4169 Ni-based superalloy
19. Investigation on the formation mechanism of non-metallic inclusions in high-aluminum and titanium-alloyed Ni-based superalloy10.1016/j.vacuum.2020.109409 ↗
20. Effect of interaction of refractories with Ni-based superalloy on inclusions during vacuum induction melting10.1007/s12613-020-2098-9 ↗
21. Fatigue life improving of drill rod by inclusion control10.1515/htmp-2015-0044 ↗
22. Melting and refining of superalloys and titanium alloys10.2355/isijinternational.32.557 ↗
23. Effect of a MgO–CaO–ZrO2-based refractory on the cleanliness of a K4169 Ni-based superalloy
24. A fatigue life model for predicting crack nucleation at inclusions in Ni-based superalloys10.1007/s11661-019-05592-4 ↗
25. Fatigue resistance of the grain size transition zone in a dual microstructure superalloy disk10.1016/j.ijfatigue.2010.09.022 ↗
26. National Transportation Safety Board. Uncontained engine failure and subsequent fire American airlines flight 383 boeing 767-323. [Washington: n.d].
27. In situ observation of calcium aluminate inclusions dissolution into steelmaking slag10.1007/s11663-018-1303-y ↗
28. In-situ observation of crystallization and growth in high-temperature melts using the confocal laser microscope10.1007/s11663-016-0675-0 ↗
29. In situ observation of calcium oxide treatment of inclusions in molten steel by confocal microscopy10.1007/s11663-017-0956-2 ↗
30. Characteristics of agglomeration of various inclusion particles on molten steel surface10.2355/isijinternational.37.946 ↗
31. In-situ observation of engulfment and pushing of nonmetallic inclusions in steel melt by advancing melt/solid interface10.2355/isijinternational.38.149 ↗
32. “In-situ” real time observation of planar to cellular and cellular to dendritic transition of crystals growing in Fe–C alloy melts10.2320/matertrans1989.37.620 ↗
33. Exploring the Ti-5553 phase transformations utilizing in-situ high-temperature laser-scanning confocal microscopy10.1016/j.matchar.2019.110013 ↗
34. High-temperature confocal laser scanning microscopy studies of ferrite formation in inclusion-engineered steels: a review
35. In situ observations of agglomeration of non-metallic inclusions at steel/Ar and steel/slag interfaces by high-temperature confocal laser scanning microscope: a review
36. Liquidus and solidus temperatures and latent heats of melting of steels10.1007/s10973-016-5942-4 ↗
37. Zhao Y, Morita K, Sano N. Thermodynamic properties of the MgAI204-MnAI204 spinel solid solution. METALLURGICALAND MATERIALSTRANSACTIONSB [n.d]..
38. Hino · 2010
39. Thermodynamics of titanium and oxygen dissolved in liquid iron equilibrated with titanium oxides10.2355/isijinternational.47.16 ↗
40. Thermodynamics on the formation of spinel nonmetallic inclusion in liquid steel10.1007/s11663-997-0023-5 ↗
41. A study on the transient inclusion evolution during reoxidation of a Fe–Al–Ti–O melt10.2355/isijinternational.51.375 ↗
42. Formation conditions of Mg2TiO4 and MgAl2O4 in Ti–Mg–Al complex deoxidation of molten iron10.2355/isijinternational.49.957 ↗
43. Wagner · 2002
44. Control of MgO–Al2O3 spinel inclusions in stainless steels10.2355/isijinternational.50.1333 ↗
45. Effect of cerium content on inclusions in an ultra-low-carbon aluminum-killed steel10.1007/s11663-020-01779-y ↗
46. Effect of Mg on behavior and particle size of inclusions in Al-Ti deoxidized molten steels10.1007/s11663-016-0706-x ↗
47. Evolution mechanisms of MgO·Al2O3 inclusions by cerium in spring steel used in fasteners of high-speed railway10.2355/isijinternational.55.970 ↗
48. Formation and thermodynamics of Mg-Al-Ti-O complex inclusions in Mg-Al-Ti-deoxidized steel10.1007/s11663-014-0121-0 ↗
49. The thermodynamics of dilute liquid nickel alloys10.1179/cmq.1977.16.1.104 ↗
50. Surface and grain-boundary energies as well as surface mass transport in polycrystalline yttrium oxide10.1007/s10853-009-4013-7 ↗
51. Wu M. In situ observation of the agglomeration of MgO–Al2O3 inclusions on the surface of a molten GCr15-bearing steel. METALLURGICAL AND MATERIALS TRANSACTIONS B [n.d]..
52. Agglomeration of non-metallic inclusions at the steel/Ar interface: model application10.1007/s11663-017-0998-5 ↗
53. Study on the capillary interaction between particles on the surface of high-temperature melts10.1002/srin.202100013 ↗
54. Agglomeration of non-metallic inclusions at steel/Ar interface: in-situ observation experiments and model validation10.1007/s11663-017-1027-4 ↗
55. Density determination and simulation of Inconel 718 alloy at normal and metastable liquid states10.1016/j.jmst.2017.10.014 ↗
56. Influence of oxide particles and hardness on the toughness of modified 9Cr-1Mo steel weld metals10.1007/s11665-020-05046-8 ↗
57. Interfacial properties of dilute Fe-O-S melts on alumina substrates10.2355/isijinternational.38.229 ↗
58. Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states10.1007/s11663-005-0026-z ↗
59. Inclusions in wrought superalloys: a review10.1007/s42243-021-00617-y ↗