journal article·2023-11Open access

Polylactic acid as biobased binder for the production of 3D printing filaments for Ti6Al4V alloy manufacturing via bound metal deposition

Mario Bragaglia, Matteo Mariani, Claudia Sergi, Fabrizio Sarasini, Jacopo Tirillò, Francesca Nanni

Abstract

In this paper, a biobased binder mainly composed of polylactic acid (PLA) was developed for the production of Ti6Al4V feedstock suitable for 3D printing via material extrusion. 3D printed samples were debound via solvent and thermal treatments and successfully sintered in reducing atmosphere obtaining dense metallic components. The designed and produced bio-binder is completely eliminated during the debinding processes leading to sintered samples showing a high densification (93–94%), with a microstructure composed of primary alpha phase with segregated beta phase at grain boundaries and having average grain size of 70 μm. 3D printed sintered samples show good mechanical properties (yield strength (σy) = 662 MPa, ultimate tensilte strength (UTS)= 743 MPa, elongation at break (εmax) = 12%, hardness = 5.15 GPa) influenced by the sintering parameters and the presence of some degree of micro-porosity in the final structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. A review on various approaches of 3D printing of Ti-Alloy10.1016/j.matpr.2022.04.532 ↗
2. Design of titanium alloys by additive manufacturing: a critical review
3. Leary · 2019
4. Taufek · 2021 · 839
5. Process parameter optimization of extrusion-based 3D metal printing utilizing PW-LDPE-SA binder system10.3390/ma10030305 ↗
6. Comparison of stainless steel 316L parts made by FDM- and SLM-based additive manufacturing processes
7. Formlabs. 3D Printing Technology Comparison: FDM vs. SLA vs. SLS 2023. https://formlabs.com/blog/fdm-vs-sla-vs-sls-how-to-choose-the-right-3d-printing-technology/(accessed July 4, 2023).
8. Markforged. Types of 3D Printing in Metal 2023. https://markforged.com/resources/learn/design-for-additive-manufacturing-metals/metal-additive-manufacturing-introduction/types-of-3d-printing-metal?__geom=✪ (accessed July 18, 2023).
9. Binder jetting: a review of process, materials, and methods
10. Binder jet 3D printing—process parameters, materials, properties, modeling, and challenges10.1016/j.pmatsci.2020.100707 ↗
11. Cavallo C. All about binder jetting 3D printing 2023. https://www.thomasnet.com/articles/custom-manufacturing-fabricating/all-about-binder-jetting-3d-printing/(accessed September 15, 2023).
12. 2023
13. A review on material extrusion additive manufacturing of metal and how it compares with metal injection moulding10.3390/met12030429 ↗
14. Influence of binder composition and material extrusion (MEX) parameters on the 3D printing of highly filled copper feedstocks10.3390/polym14224962 ↗
15. Fused filament fabrication-based additive manufacturing of commercially pure titanium10.1002/adem.202100380 ↗
16. Process sensitivity and significant parameters investigation in metal fused filament fabrication of Ti-6Al-4V10.1007/s11665-021-05666-8 ↗
17. A comprehensive study on fused filament fabrication of Ti-6Al-4V structures
18. Factors affecting properties of Ti-6Al-4V alloy additive manufactured by metal fused filament fabrication10.1016/j.powtec.2021.03.026 ↗
19. Supportless printing of lattice structures by metal fused filament fabrication (MF 3) of Ti-6Al-4V: design and analysis10.1108/RPJ-01-2021-0015 ↗
20. Rheological behaviour of highly filled materials for injection moulding and additive manufacturing: effect of particle material and loading10.3390/app10227993 ↗
21. Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: a review and future perspectives
22. 3D printing of metal parts by means of fused filament fabrication-A non beam-based approach 3D printing of metal parts by means of fused filament fabrication - a non beam-based approach
23. Printability studies of Ti-6Al-4V by metal fused filament fabrication (MF3)10.1016/j.ijrmhm.2020.105249 ↗
24. Mechanical and rheological properties of feedstock material for fused deposition of ceramics and metals (FDC and FDMet) and their relationship to process performance
25. Effect of particle size on the properties of highly-filled polymers for fused filament fabrication
26. Brostow · 2008 · 1
27. Effect of particle size, dispersion, and particle–matrix adhesion on W reinforced polymer composites10.1007/s11164-013-1110-7 ↗
28. Models to predict the viscosity of metal injection molding feedstock materials as function of their formulation10.3390/met6060129 ↗
29. Gonzlez-Gutirrez · 2012 · 65
30. Material extrusion with filaments for the production of metal parts and feedstock therefore
31. Binder removal via a two-stage debinding process for ceramic injection molding parts10.1016/j.ceramint.2013.10.032 ↗
32. Kong · 2011
33. Feedstock development for material extrusion-based printing of Ti6Al4V parts10.3390/ma15186442 ↗
34. A review on poly lactic acid (PLA) as a biodegradable polymer10.1007/s00289-022-04160-y ↗
35. PLA based biocomposites for sustainable products: a review
36. Cradle-to-grave life cycle assessment of single-use cups made from PLA, PP and PET10.1016/j.resconrec.2021.105508 ↗
37. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
38. A review on binder jet additive manufacturing of 316L stainless steel
39. Fused deposition modeling parameter optimization for cost-effective metal Part Printing10.3390/polym14163264 ↗
40. 2012
41. 2022 · 8 · 17
42. 2020 · 8 · 6
43. 2013 · 3 · 28
44. 2022 · 31
45. Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures10.1016/j.scriptamat.2019.07.015 ↗
46. 2017 · 27
47. Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: selection of binder formulation
48. 3D printing metals like thermoplastics: fused filament fabrication of metallic glasses10.1016/j.mattod.2018.07.001 ↗
49. On the use of high viscosity polymers in the fused filament fabrication process10.1108/RPJ-02-2016-0027 ↗
50. Characteristics of paraffin shielding of kartini reactor, yogyakarta10.29037/ajstd.526 ↗
51. Experimental investigation of graphene-paraffin wax nanocomposites for thermal energy storage10.1016/j.matpr.2019.07.513 ↗
52. Microwave assisted synthesis of poly(lactic acid) and its characterization using size exclusion chromatography10.1080/10601325.2012.722858 ↗
53. Thermal degradation of polylactic acid (PLA)/polyhydroxybutyrate (PHB) blends: a systematic review10.1016/j.polymdegradstab.2022.109995 ↗
54. Compatibilization of an immiscible blend of EPDM and POM with an Ionomer10.1002/app.50423 ↗
55. A simple route for additive manufacturing of 316L stainless steel via Fused Filament Fabrication10.1016/j.jmapro.2021.04.055 ↗
56. Banerjee · 2012 · 133
57. Herranz · 2012 · 265
58. Influence of processing parameters on mechanical properties of Ti–6Al–4V alloy fabricated by MIM10.1016/j.msea.2010.02.070 ↗
59. Development and design of binder systems for titanium metal injection molding: an overview10.1007/s11661-012-1485-x ↗
60. Evaluation of mechanical properties of Ti–6Al–4V BCC lattice structure with different density gradient variations prepared by L-PBF10.1016/j.msea.2023.144986 ↗
61. Factors affecting properties of Ti-6Al-4V alloy additive manufactured by metal fused filament fabrication10.1016/j.powtec.2021.03.026 ↗
62. Sintered strength of Ti-6Al-4V by metal injection molding (MIM) using palm stearin binder10.24191/jmeche.v16i1.6044 ↗
63. Poly-ether-ether-ketone – neodymium-iron-boron bonded permanent magnets via fused filament fabrication10.1016/j.synthmet.2021.116857 ↗
64. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
65. The effect of impurities elements on titanium alloy (Ti-6Al-4V) MIM sintered part properties
66. Influence of alloying elements partitioning behaviors on the microstructure and mechanical properties in α+β titanium alloy
67. Corrosion and tensile behaviors of Ti-4Al-2V-1Mo-1Fe and Ti-6Al-4V titanium alloys10.3390/met9111213 ↗
68. Influence of thermal treatment on element partitioning in α+β titanium alloy10.1016/j.jallcom.2019.03.332 ↗
69. Powder metallurgy of titanium – past, present, and future10.1080/09506608.2017.1366003 ↗
70. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.jmrt.2022.04.055 ↗
71. Additive manufacturing of Ti-6Al-4V alloy by metal fused filament fabrication (MF3): producing parts comparable to that of metanjection molding10.1007/s40964-021-00167-5 ↗
72. Electron beam additive manufacturing of titanium components: properties and performance10.1115/1.4025773 ↗
73. Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)10.1016/j.matchar.2018.03.028 ↗
74. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance10.1016/j.ijfatigue.2012.11.011 ↗
75. Laser and electron beam additive manufacturing methods of fabricating titanium bone implants10.3390/app7070657 ↗
76. Fabrication of large Ti-6Al-4V structures by direct laser deposition10.1016/j.jallcom.2014.12.234 ↗
77. Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V10.1016/j.msea.2015.12.026 ↗
78. Effect of sintering parameters on mechanical properties of injection moulded Ti–6Al–4V alloys10.1179/174329008X271691 ↗
79. Sintering parameter optimization of Ti-6Al-4V metal injection molding for highest strength using palm stearin binder10.1016/j.proeng.2013.12.192 ↗
80. The effects of Nb and Mo addition on microstructure and mechanical behaviour of Ti-6Al-4V alloy10.18311/jsst/2017/11026 ↗
81. Mechanisms of heat treatment and ductility improvement of high-oxygen Ti–6Al–4V alloy fabricated by metal injection molding10.1016/j.msea.2022.142924 ↗