Precipitation kinetics of gamma double prime phase during direct aging treatment of Inconel 718 superalloy additively manufactured by selective laser melting
Source abstract
Abstract
While direct aging of Inconel 718 nickel-based superalloy from the as-built state is known as a promising practice to tune the mechanical properties, the precipitation kinetics of γ˝ phase, as the main precipitating phase, has received less attention. Accordingly, in the present work, post-processing in the form of the direct aging treatment of Inconel 718 superalloy manufactured by the laser powder bed fusion additive manufacturing, also known as selective laser melting (SLM), was systematically investigated by microstructural analysis and hardness measurements. It was revealed that the peak aged condition for direct aging can be achieved at much shorter holding times compared to aging after homogenization/solutionizing heat treatment. Moreover, the Johnson–Mehl–Avrami–Kolmogorov (JMAK) analysis based on both hardness measurements and microstructural analysis were applied to unravel the γ˝ precipitation kinetics, which respectively led to the precipitation activation energies of 160 and 157 kJ/mol, which are consistent with the activation energy for the diffusion of Nb in IN718 superalloy manufactured by SLM. Moreover, the Lifshitz–Slyozov–Wagner (LSW) diffusion-controlled growth theory was modified to become applicable for investigating the precipitation kinetics during the evolution of the volume fraction of the precipitating phase, which also led to the activation energy of 157 kJ/mol. These results can also shed light on the procedures used for investigating the precipitation kinetics during aging of additively manufactured Inconel 718 superalloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Analysis of strain-induced precipitates by delta-processing in Inconel 718 superalloy10.1016/j.matchar.2021.110926 ↗
2. A physically-based model considering dislocation–solute atom dynamic interactions for a nickel-based superalloy at intermediate temperatures10.1016/j.matdes.2019.108122 ↗
3. A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy10.1016/j.actamat.2017.12.045 ↗
4. Homogenization kinetics of a typical nickel-based superalloy10.1016/j.jallcom.2019.04.147 ↗
5. Additive Manufacturing of Nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship10.1016/j.pmatsci.2023.101108 ↗
6. Metallurgy of additive manufacturing: examples from electron beam melting
7. Additive manufacturing–A review of hot deformation behavior and constitutive modeling of flow stress10.1016/j.cossms.2022.100992 ↗
8. Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion10.1016/j.actamat.2018.03.017 ↗
9. Effect of trace lanthanum hexaboride on the phase, grain structure, and texture of electron beam melted Ti-6Al-4V
10. Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview10.1016/j.jmrt.2019.12.015 ↗
11. Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives10.1016/j.jmrt.2020.04.062 ↗
12. A review on metallurgical aspects of laser additive manufacturing (LAM): stainless steels, nickel superalloys, and titanium alloys10.1016/j.jmrt.2021.12.039 ↗
13. Hot deformation behavior and flow stress modeling of Ti–6Al–4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field10.1016/j.msea.2020.139822 ↗
14. A review of mechanical properties of additively manufactured Inconel 718
15. Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy10.1016/j.jmrt.2023.04.013 ↗
16. Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy10.1080/10426914.2016.1257805 ↗
17. The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy10.1016/j.msea.2020.140427 ↗
18. Shear punch testing for evaluation of mechanical properties of post heat-treated Inconel 718 nickel-based superalloy fabricated by additive manufacturing10.1016/j.jmrt.2023.09.149 ↗
19. Heat treatment for metal additive manufacturing
20. Influence of post-heat-treatment on the microstructure and fracture toughness properties of Inconel 718 fabricated with laser directed energy deposition additive manufacturing10.1016/j.msea.2020.140092 ↗
21. Donachie · 2002
22. Precipitation kinetics of γ ″phase and its mechanism in a Nb-bearing nickel-based superalloy during aging10.1016/j.vacuum.2020.109456 ↗
23. Delta processing effects on the creep behavior of a typical Nb-bearing nickel-based superalloy10.1016/j.vacuum.2020.109913 ↗
24. Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing10.1016/j.scriptamat.2016.10.035 ↗
25. Heat treatment of Inconel 718 produced by selective laser melting: microstructure and mechanical properties10.1016/j.msea.2019.02.046 ↗
26. Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050° C solid solution + double ageing10.1016/j.vacuum.2017.08.044 ↗
27. Effects of the γ ″-Ni3Nb phase on mechanical properties of Inconel 718 Superalloys with different heat treatments10.3390/ma13010151 ↗
28. Elucidating the effects of microsegregation on the precipitation phenomena in as-cast Nb-bearing superalloy10.1016/j.matlet.2020.127481 ↗
29. Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants10.1016/j.scriptamat.2019.01.041 ↗
30. The effect of subsequent heat treatment on the evolution behavior of second phase particles and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting10.1016/j.msea.2020.139931 ↗
31. Comparative study on the microstructure evolution of selective laser melted and wrought IN718 superalloy during subsequent heat treatment process and its effect on mechanical properties10.1016/j.msea.2020.139735 ↗
32. Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens
33. Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: sample orientation dependence and effects of post heat treatments10.1016/j.msea.2017.12.043 ↗
34. Coarsening behaviour of γ ″-and γ′-particles in Inconel alloy 71810.1179/030634582790427118 ↗
35. Gamma double prime precipitation kinetic in Alloy 71810.1016/j.msea.2007.08.046 ↗
36. Effect of cold rolling and first precipitates on the coarsening behavior of γ ″-phases in Inconel 718 alloy10.1007/s12613-016-1326-9 ↗
37. Precipitation kinetics of niobium carbide (NbC) during homogenization heat treatment of additively manufactured Inconel 718 superalloy10.1016/j.jmrt.2023.06.069 ↗
38. Precipitation behavior of δ phase and its effect on stress rupture properties of selective laser-melted Inconel 718 superalloy10.1016/j.compositesb.2021.109202 ↗
39. Investigation of dissolution behavior of laves phase in inconel 718 fabricated by laser directed energy deposition
40. Effects of tempering on the mechanical and corrosion properties of dual phase steel
41. Tempering kinetics and corrosion resistance of quenched and tempered AISI 4130 medium carbon steel10.1002/maco.202112516 ↗
42. Extrapolation of flow curves at hot working conditions10.1016/j.msea.2009.11.013 ↗
43. Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants10.1016/j.scriptamat.2019.01.041 ↗
44. Evolution of lattice spacing of gamma double prime precipitates during aging of polycrystalline Ni-base superalloys: an in situ investigation10.1007/s11661-019-05536-y ↗
45. Determining volume fractions of γ, γ′, γ ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure10.1016/j.msea.2020.139228 ↗
46. Hot tensile behavior of cold-rolled Inconel 718 alloy at 650 C: the role of δ phase10.1016/j.msea.2018.02.093 ↗
47. Spheroidization mechanism of lamellar δ phase in Inconel 718 during Delta processing10.1007/s11665-020-04909-4 ↗
48. Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging10.1016/j.jallcom.2019.05.001 ↗
49. Simulation of TTT curves for additively manufactured Inconel 62510.1007/s11661-018-4959-7 ↗
50. Fabrication of highly compact Inconel 718 alloy by spark plasma sintering and solution treatment followed by aging10.1016/j.vacuum.2019.01.048 ↗
51. Differentiation of γ′-and γ ″-precipitates in Inconel 718 by a complementary study with small-angle neutron scattering and analytical microscopy10.1016/j.actamat.2018.10.014 ↗
52. Gamma-gamma prime-gamma double prime dual-superlattice superalloys10.1016/j.scriptamat.2017.04.029 ↗
53. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
54. Microstructure and mechanical properties of novel high-entropy alloy particle reinforced aluminum matrix composites fabricated by selective laser melting10.1016/j.jallcom.2021.159197 ↗
55. Nano-scale heterogeneity-driven metastability engineering in ferrous medium-entropy alloy induced by additive manufacturing10.1016/j.actamat.2021.117426 ↗
56. Christian · 2002
57. Study on the microstructure and creep behavior of Inconel 718 superalloy fabricated by selective laser melting10.1016/j.msea.2019.138282 ↗
58. Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment10.1016/j.msea.2017.08.058 ↗
59. Mathematical model of influence of rapid induction heating on nucleation and growth of precipitates10.1179/026708301101509278 ↗
60. Morphological evolution and dissolution mechanisms of γ′ phase in a novel HIPed P/M superalloy in hot deformation process10.1016/j.jallcom.2023.169653 ↗
61. High-temperature deformation behavior of 718Plus: consideration of γ′ effects10.1520/MPC20190031 ↗
62. Dendrite evolution and quantitative characterization of γ′ precipitates in a powder metallurgy Ni-based superalloy by different cooling rates10.1016/j.jallcom.2022.165677 ↗
63. Simulation and experimental analysis of nanoscale precipitation during ageing treatment of laser powder-bed fusion fabricated IN718 Ni-based superalloy10.1016/j.matchar.2022.112163 ↗