The evolution of carbides during long-term creep/aging of nickel based superalloy K444
Source abstract
Abstract
In K444 alloy, the evolution of carbides during stress aging (creep) and stress-free aging at 900 °C for 5000 h, and interrupted at 3000 h were investigated, combining microstructure characterization and quantitative statistics method. After stress-free aging for 5000 h, the volume fraction of intragranular MC and M6C carbides decrease from 0.48 % to 0.66 %–0.26 % and 0.48 %, respectively, while that of M23C6 carbides increase to 0.28 %. The two degradation behaviors can be concluded as MC + γ → M6C + M23C6 + γ′ and M6C + γ → M23C6 + γ′ respectively. The former controlled by the diffusion of Ti occurred earlier, while the latter determined by the diffusion of W and Mo mainly happened later. The applied stress did not change degradation reactions while accelerate the degradation rate slightly. During stress-free aging, the morphology of grain boundaries (GBs) changed from discrete distribution to semi-continuous and then to continuous chain, and the content of MC and M6C carbides decreases while that of M23C6 carbides increases. The applied stress markedly promotes above behaviors. Especially, the completed continuous chain formed before 3000 h. Moreover, the applied stress induced the formation of cavitation on the GBs, which is attributed to the following reasons. First, it can accelerate the degradation of GBs and decline the GBs strength. What's more, dislocations pile up on the GBs and cause a high level of stress concentration. Finally, the new generated phase interfaces have a greater deviation with its adjacent carbides, weakening the binding force of GBs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Abnormal creep property degradation in a directionally solidified superalloy DZ406 after suffering overheating10.1016/j.matchar.2021.110910 ↗
2. Effect of Ru on γ/γ' microstructural evolutions and precipitation of TCP phases during thermal exposure at 1100 °C in a single crystal superalloy10.1016/j.matchar.2022.111794 ↗
3. Effect of tantalum on the microstructure stability of PM Ni-base superalloys10.1016/j.matchar.2021.111326 ↗
4. Microstructure and mechanical properties of a directionally solidified superalloy DZ411 plate sample repaired by laser melting deposition10.1016/j.msea.2023.145141 ↗
5. Effect of pre-tensile treatments on the mechanical properties and deformation mechanism of a novel Ni-based superalloy10.1016/j.msea.2023.145063 ↗
6. Hierarchical architecture and mechanical behavior of K418 Ni-based superalloys manufactured by laser powder bed fusion10.1016/j.msea.2022.143630 ↗
7. Microstructure and mechanical properties of cast Ni-base superalloy K4410.1016/j.msea.2004.03.005 ↗
8. The effect of gallium on the mechanical properties of superalloy K44410.4028/www.scientific.net/AMR.452-453.31 ↗
9. Influence of alumina abrasive tool wear on ground surface characteristics and corrosion properties of K444 nickel-based superalloy10.1016/j.cja.2021.06.008 ↗
10. Influence of long-term isothermal aging on microstructure and creep rupture properties of Ni-base superalloy M470610.1007/s11771-020-4298-x ↗
11. The effect of coarsening of γ′ precipitate on creep properties of Ni-based single crystal superalloys during long-term aging
12. Properties and microstructures of M951 alloy after long-term exposure10.1016/j.msea.2009.11.049 ↗
13. Long-term thermal exposure responses of the microstructure and properties of a cast Ni-base superalloy10.1016/j.msea.2012.02.059 ↗
14. Microstructure evolution and stress rupture properties of K4750 alloys with various B contents during long-term aging10.1016/j.jmst.2020.10.014 ↗
15. Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure10.1016/j.actamat.2017.04.006 ↗
16. Grain boundary microstructure-property relationships in the cast & wrought Ni-based superalloy René 41 with boron and carbon additions10.1016/j.actamat.2023.119235 ↗
17. Evolution of microstructure and 800 °C/294 MPa stress rupture property of cast Ni-based superalloys during long-term thermal exposure: role and behavior of primary MC carbide
18. Analysis of carbide transformation in MC-M23C6 and its effect on mechanical properties of Ni-based superalloy
19. The effect of stress on primary MC carbides degeneration of Waspaloy during long term thermal exposure10.1016/j.jallcom.2017.11.166 ↗
20. Effect of grain boundary precipitates on the stress rupture properties of K4750 alloy after long-term aging at 750 °C for 8000 h10.1016/j.jmst.2021.03.022 ↗
21. Carbides evolution in a Ni-16Mo-7Cr base superalloy during long-term thermal exposure10.3390/ma10050521 ↗
22. Carbide evolution of a directionally solidified Ni-based superalloy during long-term exposure10.4028/www.scientific.net/AMR.452-453.72 ↗
23. Effect of melt heat treatment on MC carbide formation in nickel-based superalloy K46510.1016/j.rinp.2017.06.020 ↗
24. Decomposition of primary MC carbide and its effects on the fracture behaviors of a cast Ni-base superalloy10.1016/j.msea.2007.07.055 ↗
25. Microstructural study of (Co–Ni–Fe) based alloys10.1016/j.msea.2007.05.092 ↗
26. Effect of microstructural evolution and mechanical properties of Haynes 230 superalloy during long-term aging at 700 °C10.1016/j.jallcom.2023.169495 ↗
27. Effects of hot compression on carbide precipitation behavior of Ni—20Cr—18W—1Mo superalloy10.1016/S1003-6326(16)64417-5 ↗
28. Assessment of the stress-oriented precipitation hardening designed by interior residual stress during ageing in IN718 superalloy10.1016/j.msea.2018.05.016 ↗
29. Effects of carbides and its evolution on creep properties of a directionally solidified nickel-based superalloy10.1016/j.msea.2015.02.056 ↗
30. Effect of thermal exposure on the microstructure and stress-rupture properties of a directionally solidified superalloy10.1007/s11665-021-06124-1 ↗
31. Study of precipitation-assisted stress relaxation and creep behavior during the ageing of a nickel-iron superalloy10.1016/j.msea.2018.11.028 ↗
32. Microstructure and stress-rupture life of high W-content cast Ni-based superalloy after 1000–1100 °C thermal exposures10.1016/j.msea.2018.04.037 ↗
33. Effect of applied stress on γ’-rafting behavior in a Ni-based single-crystal superalloy: experiments and finite element analysis10.1007/s42243-018-0076-5 ↗
34. The effect of lattice misfit on the dislocation motion in superalloys during high-temperature low-stress creep10.1016/j.actamat.2005.06.013 ↗
35. Influences of stress-aging on the precipitation behavior of δ phase (Ni3Nb) in a nickel-based superalloy10.1016/j.matdes.2020.109256 ↗
36. Primary MC decomposition and its effects on the rupture behaviors in hot-corrosion resistant Ni-based superalloy K44410.1016/j.msea.2012.05.077 ↗
37. M23C6 precipitation behavior in a Ni-base superalloy M96310.1007/s10853-005-2418-5 ↗
38. Thermal stability of primary MC carbide and its influence on the performance of cast Ni-base superalloys10.1016/j.matdes.2014.12.038 ↗
39. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
40. Effect of long-term aging on the microstructure, stress rupture properties and deformation mechanisms of a new cast nickel base superalloy10.1016/j.msea.2018.08.096 ↗
41. A new approach to strengthen grain boundaries for creep improvement of a Ni–Cr–Co–Mo superalloy at 950 °C10.1016/j.msea.2014.12.010 ↗
42. Dislocation climbing dominated decomposition and fracture of carbides in a Ni-based superalloy10.1016/j.actamat.2023.118669 ↗
43. Microstructural processes in high temperature low cycle fatigue of MAR-M200 + Hf10.1016/0956-7151(94)00470-3 ↗
44. Effect of thermal exposure on the stability of carbides in Ni–Cr–W based superalloy10.1016/j.msea.2010.11.088 ↗
45. Microstructure evolution of cobalt aluminide coating on nickel-based superalloys during exposure at 1050 °C10.1016/j.vacuum.2014.03.013 ↗
46. Formation and evolution behavior of M6C carbide in a Ni-W-Cr superalloy
47. Effects of a high temperature artificial aging on microstructure and mechanical properties of the Ni-base superalloy GTD-11110.1016/j.matchar.2023.112966 ↗
48. Evaluation of high-temperature creep behavior in Inconel-713C nickel-based superalloy considering effects of stress levels10.1016/j.msea.2017.02.066 ↗
49. Effects of solutioning and ageing treatments on properties of Inconel-713C nickel-based superalloy under creep loading10.1016/j.msea.2017.11.038 ↗
50. Effects of B content on microstructure and high-temperature stress rupture properties of a high chromium polycrystalline nickel-based superalloy10.1016/j.jallcom.2020.157929 ↗
51. High temperature creep behavior of a cast polycrystalline nickel-based superalloy K465 under thermal cycling conditions10.1016/j.mtla.2020.100913 ↗
52. Material characterization of long-term service-exposed GTD-111 nickel based superalloy
53. Correlations between microstructure evolution and mechanical behavior of a nickel-based single crystal superalloy with long-term aging effects
54. Unveiling the Re effect on long-term coarsening behaviors of γ′ precipitates in Ni-based single crystal superalloys10.1016/j.actamat.2022.117979 ↗
55. Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering10.1016/j.matchar.2021.111510 ↗
56. The effect of stress on primary MC carbides degeneration of Waspaloy during long term thermal exposure10.1016/j.jallcom.2017.11.166 ↗
57. Recrystallization nucleation under close-set δ phase in a nickel-based superalloy during annealing10.1016/j.jmst.2021.11.016 ↗
58. Evolution of microstructure and δ phase in an aging-treated nickel-based superalloy during hot compression10.1016/j.matchar.2023.112876 ↗
59. The nucleation and growth of η phase in nickel-based superalloy during long-term thermal exposure10.1016/j.actamat.2019.12.038 ↗
60. The grain boundary microstructures of the base and modified RR 2072 bicrystal superalloys and their effects on the creep properties
61. Effect of long-term aging on the microstructure, stress rupture properties and deformation mechanisms of a new cast nickel base superalloy10.1016/j.msea.2018.08.096 ↗
62. Effects of initial δ phase on creep behaviors and fracture characteristics of a nickel‐based superalloy10.1002/adem.201700820 ↗
63. Study of precipitation-assisted stress relaxation and creep behavior during the ageing of a nickel-iron superalloy10.1016/j.msea.2018.11.028 ↗
64. The creep deformation and fracture behaviors of nickel-base superalloy M951G at 900°C10.1016/j.msea.2017.09.066 ↗
65. Correlation between grain boundary misorientation and M23C6 precipitation behaviors in a wrought Ni-based superalloy10.1016/j.matchar.2013.02.006 ↗
66. Microstructures and tensile properties of a grain-size gradient nickel-based superalloy
67. The nucleation and growth of η phase in nickel-based superalloy during long-term thermal exposure10.1016/j.actamat.2019.12.038 ↗
68. Degradation processes in high-temperature creep of cast cobalt-based superalloys10.1016/j.matchar.2018.08.006 ↗
69. Evolution of strain-induced precipitates in Inconel 617B alloy and their effect on flow behavior10.1016/j.jallcom.2021.161992 ↗