Epitaxial growth of rare-earth yttrium on nanosheets to form semicoherent interface in zinc implant
Source abstract
Abstract
Molybdenum disulfide (MoS2) nanosheet as nano reinforcement exhibits great advantages in zinc (Zn) implant due to its coordinated crystal slip and grain boundary strain effect. Nevertheless, the poor interface bonding restrains the coordination effect of MoS2. In this work, rare earth yttrium (Y) was used to epitaxial grow on the vacancy nucleation sites of MoS2 plane through a gas phase reduction method, and then introduced into Zn to improve their interface bonding. On one hand, rare earth Y could form a semicoherent interface with Zn due to the similar atomic arrangement and small lattice misfit between (101)Y plane (0.272 nm) and (002)Zn plane (0.248 nm). On the other hand, it could be tightly integrated together with sulfur element of MoS2 via covalent bond. As a result, the plastic strain of composites was improved from 6.1 % to 10.45 %. Simultaneously, the fracture energy was also increased to 201 × 103 J/m2, since rare earth Y considerably promoted load transfer efficiency from Zn matrix to MoS2 and thereby significantly activated slip systems. Encouragingly, the mechanical strength of the Zn-based biocomposite simultaneously reached 273.3 ± 10.9 MPa due to load transfer strengthening and grain refinement.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Degradation behavior, cytotoxicity, hemolysis, and antibacterial properties of electro-deposited Zn-Cu metal foams as potential biodegradable bone implants10.1016/j.actbio.2019.11.031 ↗
2. Additively manufactured high entropy alloy with high wear resistance for biomedical implant10.1016/j.vacuum.2023.112939 ↗
3. Chunrong pan, cijun shuai, Influence of heat treatment on microstructure, mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion
4. The effects of Cu and Mn on the microstructure, mechanical, corrosion properties and biocompatibility of Zn-4Ag alloy10.1016/j.jmrt.2022.11.083 ↗
5. The Peltier heat and the standard electrode potential of ferro-ferricyanide couple at 298.15 K determined by electrochemical–calorimetry10.1007/s10973-011-1681-8 ↗
6. A novel material of nanoporous magnesium for hydrogen generation with salt water10.1016/j.jpowsour.2018.05.062 ↗
7. ZnMn2O4/Carbon composite recycled from spent zinc-carbon batteries for Zn-air battery applications10.1149/1945-7111/ac9a7c ↗
8. Calcium–zinc phosphate chemical conversion coating facilitates the osteointegration of biodegradable zinc alloy implants by orchestrating macrophage phenotype10.1002/adhm.202202537 ↗
9. Surface modification on biodegradable zinc alloys10.1016/j.jmrt.2023.06.149 ↗
10. In vivo study of the efficacy, biosafety, and degradation of a zinc alloy osteosynthesis system10.1016/j.actbio.2019.05.001 ↗
11. Tribological properties of MoS2 powder-lubricated interface10.1108/ILT-04-2020-0150 ↗
12. Investigation of Al-Mg based composite incorporated with MoS2 through powder metallurgy
13. Mechanical properties of bismuth telluride based alloys with embedded MoS2 nano-particles10.1016/j.matdes.2016.04.042 ↗
14. Mechanical properties and dry sliding wear behaviour of molybdenum disulphide reinforced zinc–aluminium alloy composites10.1007/s12666-017-1037-6 ↗
15. Accuracy of the Shardt–Elliott–Connors–Wright equation for predicting the surface tension of metal alloys10.1016/j.jallcom.2022.166117 ↗
16. Determining the surface tension of two-dimensional nanosheets by a low-rate advancing contact angle measurement
17. Effect of Mo-coated MoS2 powder addition on the microstructure and properties of sintered Fe-15Cu-0.8C antifriction materials10.1007/s10853-023-09183-y ↗
18. Copper matrix composites reinforced by rGO-MoS2 hybrid: strengthening effect to enhancement of tribological properties10.1016/j.compositesb.2019.106931 ↗
19. Balancing strength and ductility in Al matrix composites reinforced by few-layered MoS(2) through in-situ formation of interfacial Al(12)Mo10.3390/ma14133561 ↗
20. Incorporation of rare earth elements with transition metal-based materials for electrocatalysis: a review for recent progress10.1016/j.mtchem.2019.02.002 ↗
21. Effect of rare-earth elements on microstructure and mechanical properties of in-situ Fe-TiB2 composites
22. Rare earth based magnesium alloys—a review on WE series10.3389/fmats.2021.804906 ↗
23. Lattice-matched epitaxial graphene grown on boron nitride10.1021/acs.nanolett.7b04453 ↗
24. Interface design strategy for GNS/AZ91 composites with semi-coherent structure
25. Rare earth oxide CeO2 decorated graphene nanoplatelets-reinforced 2024 aluminum alloy matrix composites fabricated by pressure sintering process10.3390/app112311177 ↗
26. Co-continuous structure enhanced magnetic responsive shape memory PLLA/TPU blend fabricated by 4D printing
27. Design, fabrication, and structural safety validation of 3D-printable biporous bone augments10.1007/s42242-022-00214-2 ↗
28. Simultaneous multimaterial multimethod bioprinting10.1007/s42242-022-00203-5 ↗
29. Solution-phase epitaxial growth of noble metal nanostructures on dispersible single-layer molybdenum disulfide nanosheets10.1038/ncomms2472 ↗
30. Effect of structural phases on mechanical properties of molybdenum disulfide10.1021/acsomega.9b04360 ↗
31. Phase‐engineering of 1T/2H molybdenum disulfide by using ionic liquid for enhanced electrocatalytic hydrogen evolution10.1002/celc.202000745 ↗
32. Mechanical properties of AlN and molybdenum disulfide reinforced aluminium alloy matrix composites10.1088/1742-6596/2027/1/012010 ↗
33. The apparent surface free energy of rare earth oxides is governed by hydrocarbon adsorption10.1016/j.isci.2021.103691 ↗
34. Rare earth elements enhanced the oxidation resistance of Mo-Si-based alloys for high temperature application: a review10.3390/coatings11091144 ↗
35. Extrusion techniques on microstructure optimization and quantitative analysis of texture influence on ductility improvement for heat-resistant Mg–Nd–Zn–Zr magnesium alloy10.1007/s10853-022-06881-x ↗
36. Effect of addition of rare earth elements on the microstructure, texture, and mechanical properties of extruded ZK60 alloy10.1007/s12540-022-01341-2 ↗
37. Texture softening in a rare earth elements-containing AZ31 magnesium alloy during hot compression deformation10.1016/j.jmrt.2022.04.079 ↗
38. Microstructure and texture evolution of AZ31 Mg alloy after uniaxial compression and annealing10.1016/j.jma.2018.11.003 ↗
39. Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys10.1016/j.matlet.2014.04.144 ↗
40. Effects of yttrium addition on grain boundary character distribution and stacking fault probabilities of 90Cu10Ni alloy10.1016/j.matchar.2019.02.040 ↗
41. Investigation of grain subdivision at very low plastic strains in a magnesium alloy10.1016/j.msea.2017.03.080 ↗
42. Interfacial structure in AZ91 alloy composites reinforced by graphene nanosheets10.1016/j.carbon.2017.10.090 ↗
43. Interfacial reaction and interfacial strengthening mechanism of graphene nanosheets reinforced powder metallurgy nickel-based superalloy composite10.1016/j.matchar.2023.113282 ↗
44. Preparation of heterogeneous nanolaminated graphene nanosheet/Al-Cu-Mg composites by powder assembly & alloying10.1016/j.jallcom.2023.171648 ↗
45. Influence of interfacial stress transfer on fatigue crack growth in SiC-fibre reinforced titanium alloys10.1016/S1359-835X(00)00130-5 ↗
46. Study on quasi-in-situ tensile microstructure evolution law of 5052-O aluminum alloy based on EBSD
47. Influence of graphene oxide nanoplates on strengthening mechanism of Al6061-GO nanocomposites10.1007/s12540-022-01208-6 ↗
48. Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite10.1016/j.carbon.2016.03.038 ↗
49. Surface-roughness-induced plasticity in a biodegradable Zn alloy10.1002/adma.202207570 ↗
50. Grain refinement mechanism and its effect on mechanical properties and biodegradation behaviors of Zn alloys-A review10.1016/j.jmrt.2023.04.219 ↗
51. Quench-induced contributions of high angle grain boundary and low angle grain boundary to exfoliation corrosion propagation in an AlZnMgCu alloy10.1016/j.jmrt.2021.11.115 ↗
52. Oxygen vacancy boosting Fenton reaction in bone scaffold towards fighting bacterial infection
53. Phosphorus-doped MoS2 nanosheets supported on carbon cloths as efficient hydrogen-generation electrocatalysts10.1002/cctc.201701680 ↗
54. Biodegradable Zn-0.5Li alloys with supersaturated solid solution-aging treatment for implant applications10.1016/j.jmrt.2023.05.136 ↗
55. Laser printed amorphous magnesium alloy: microstructure, mechanical properties and degradation behavior10.1016/j.jmrt.2023.11.095 ↗