journal article·2024-03Open access

Microstructural evolution and high-temperature strengthening mechanisms of the IN 738LC superalloy prepared by selective laser melting

Chenyu Yang, Rui Hu, Xinxin Liu, Yajun Wang, Jie Bai, Rui Ma

Abstract

Defect-free SLM-IN 738LC superalloy samples were fabricated using selective laser melting (SLM). The as-built samples exhibit a cellular structure with fine carbides, γ′ phases, and high-density dislocations at the cell boundary and nano-size γ′ phases in the interior, resulting in excellent deformation resistance and favorable mechanical properties at room temperature, with a yield strength (YS) of 970 MPa, an ultimate tensile strength (UTS) of 1263 MPa, and an elongation (EL) of 33%. This study investigates the evolution behavior of the γ′ phase at different solid solution treatment (SHT) temperatures and its impact on alloy strength and toughness. The 1020 + AHT sample exhibits a uniform distribution of coarse γ′ phases. The samples subjected to 1070 + AHT and 1120 + AHT display a bimodal distribution of γ′ phases. When the SHT temperature was further increased, fine spherical γ′ phases are evenly distributed in the 1160 + AHT and 1200 + AHT samples. Moreover, the γ/γ′ eutectics at the grain boundaries gradually dissolve with increasing SHT temperature, whereas the size and fraction of carbides increase. The room temperature tensile test of the 1070 + AHT sample demonstrated a favorable balance between strength and plasticity (YS = 1217 MPa, UTS = 1472 MPa, EL = 9.25%). This is attributed to the synergistic strengthening effect of the bimodal distribution of the γ′ phase. The temperature-dependent deformation behavior of the 1070 + AHT sample was analyzed at 23 °C, 800 °C, 900 °C, and 1000 °C. At 23 °C, numerous dislocations accumulated around the γ/γ′ interfaces. When the temperature increased to 800–900 °C, the dislocations shearing γ′ phases is activated and the alloy remained high strength. At 1000 °C, both the dislocation shearing and dislocation bypassing mechanisms coexist, resulting in a decrease in the strength of the alloy and an increase in its plasticity. This work provides scientific and theoretical support for SLM-IN 738LC parts with favorable properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. The liquation cracking behavior of IN738LC superalloy during low power Nd:YAG pulsed laser welding10.1016/j.matchar.2012.02.019 ↗
2. On the role of liquated γ′ precipitates in weld heat-affected zone microfissuring of a nickel-based superalloy10.1016/j.msea.2005.04.034 ↗
3. Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting10.1007/s00170-020-05197-x ↗
4. An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel738LC superalloy10.1016/j.matdes.2009.05.041 ↗
5. Texture, microstructure and mechanical anisotropy in SLM processed superalloys[C]
6. Processability of different IN738LC powder batches by selective laser melting10.1016/j.jmatprotec.2015.09.046 ↗
7. Effect of carbon content on the microstructure, tensile properties and cracking susceptibility of IN738 superalloy processed by laser powder bed fusion
8. Investigation on additive manufacturing of tungsten carbide-cobalt byselective laser melting10.1016/j.procir.2015.08.060 ↗
9. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles10.1016/j.matdes.2015.10.027 ↗
10. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)10.1016/j.msea.2014.10.003 ↗
11. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy10.1016/j.jallcom.2018.03.366 ↗
12. Microstructure formed during selective laser melting of IN738LC in keyhole mode10.1016/j.jallcom.2019.03.419 ↗
13. On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting10.1016/j.matchar.2018.12.032 ↗
14. Selective laser melting of the hard-to-weld IN738LC superalloy: efforts to mitigate defects and the resultant microstructural and mechanical properties10.1016/j.jallcom.2019.151662 ↗
15. Direct laser metal deposition of Inconel 73810.1016/j.msea.2018.10.020 ↗
16. Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys[J]
17. Effect of post heat-treatment on the microstructure and high-temperature oxidation behavior of precipitation hardened IN738LC superalloy fabricated by selective laser melting10.1016/j.jmst.2020.11.013 ↗
18. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
19. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy10.1016/j.optlastec.2015.07.009 ↗
20. Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components
21. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
22. Effect of scan rotation on the microstructure development and mechanical properties of 316L parts produced by laser powder bed fusion
23. Investigation of cracking mechanism and yield strength associated with scanning strategy for an additively manufactured nickel-based superalloy10.1016/j.jallcom.2022.168532 ↗
24. Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies10.1016/j.msea.2016.03.036 ↗
25. Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy
26. Towards creep property improvement of selective laser melted Ni-based superalloy IN738LC10.1016/j.jmst.2021.09.050 ↗
27. High temperature material properties of IN738LC processed by selective laser melting (SLM) technology10.1108/13552541311323281 ↗
28. Selective laser melting of IN738 superalloy with a low Mn+Si content: effect of energy input on characteristics of molten pool, metallurgical defects, microstructures and mechanical properties10.1016/j.msea.2021.141985 ↗
29. The effect of Hf on solidification cracking inhibition of IN738LC processed by Selective Laser Melting10.1016/j.msea.2021.140733 ↗
30. Effect of heat treatments on the microstructure and mechanical properties of IN738LC prepared by electron beam powder bed fusion10.1016/j.jallcom.2022.165807 ↗
31. Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment10.1016/j.matchar.2016.02.004 ↗
32. Metastable carbides and their impact on recrystallisation in IN738LC processed by selective laser melting10.1016/j.addma.2018.05.030 ↗
33. Microstructure evolution, phase transformation and mechanical properties of IN738 superalloy fabricated by selective laser melting under different heat treatments10.1016/j.msea.2022.142947 ↗
34. Microstructure evolution in polycrystalline IN738LC in the range 1120 to 1250°C
35. Characteristics of the γ′ precipitates at high temperatures in Ni-base polycrystalline superalloy IN738LC10.1023/A:1004869714854 ↗
36. Tensile strengthening in the nickel-base superalloy IN738LC10.1361/105994900770345999 ↗
37. Microstructure, mechanical properties and strengthening mechanisms of IN738LC alloy produced by Electron Beam Selective Melting
38. A review study on thermal stability of high entropy alloys: normal/abnormal resistance of grain growth10.1016/j.jallcom.2023.170826 ↗
39. A review study on thermal stability of powder-based additively manufactured alloys10.1016/j.jallcom.2023.171384 ↗
40. Constructing the high temperature efficiency and instability maps of selective laser melted 316L stainless steel through artificial neural network modeling10.1016/j.jmrt.2022.04.116 ↗
41. The high temperature flow behavior of additively manufactured Inconel 625 superalloy10.1088/2053-1591/ab44f6 ↗
42. Effect of various heat treatment conditions on microstructure of cast polycrystalline IN738LC alloy10.1016/j.msea.2007.10.004 ↗
43. Effect of heat treatments on the micros tructure and mechanical properties of IN738LC prepared by electr on beam powder bed fusion10.1016/j.jallcom.2022.165807 ↗
44. Effects of heat treatments on the microstructure and tensile properties of IN738 superalloy with high carbon content fabricated via laser powder bed fusion10.1016/j.jallcom.2023.170110 ↗
45. Effect of temperature on the microstructure and tensile properties of microcrack free hastelloy X produced by selective laser melting
46. Grain refinement and crack inhibition of hard-to-weld Inconel 738 alloy by altering the scanning strategy during selective laser melting10.1016/j.matdes.2021.109940 ↗
47. Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
48. A comparing study of defect generation in IN738LC superalloy fabricated by laser powder bed fusion: continuous-wave mode versus pulsed-wave mode10.1016/j.jmst.2021.03.006 ↗
49. Effect of high preheating on the microstructure and mechanical properties of high gamma prime Ni-based superalloy manufactured by laser powder bed fusion10.1016/j.jallcom.2023.170598 ↗
50. Hierarchical microstructure and enhanced mechanical properties of SLM-fabricated GH5188 Co-superalloy
51. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
52. Dislocation network in additive manufactured steel breaks strength-ductility trade-off10.1016/j.mattod.2017.11.004 ↗
53. Microstructure and mechanical properties of K438 alloy processed by selective laser melting and subsequent heat treatment
54. Tailoring of nanoscale γ’ precipitates and unveiling their strengthening mechanisms in multimodal nickel-based superalloy GH4720Li
55. The microstructure evolution and strengthening mechanism of a γ′-strengthening superalloy prepared by induction-assisted laser solid forming10.1016/j.jallcom.2018.11.386 ↗
56. Tensile deformation behavior of a new Ni-base superalloy at room temperature10.1016/j.msea.2015.12.089 ↗
57. Predicting coherency loss of γ′′ precipitates in IN718 superalloy10.1007/s11661-016-3480-0 ↗
58. Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants10.1016/j.jallcom.2017.10.120 ↗
59. Microtwinning and other shearing mechanisms at intermediate temperatures in Ni-based superalloys10.1016/j.pmatsci.2009.03.010 ↗
60. T · 2011
61. The influence of thermal exposure on the γ' precipitates characteristics and tensile behavior of superalloy IN-738LC10.1016/j.jmatprotec.2004.01.006 ↗
62. Improving high-temperature mechanical properties of laser powder bed-fused Inconel 738 alloy by hot isostatic pressing: tailoring precipitates and healing defects10.1016/j.msea.2022.144285 ↗