Laser surface texturing of Ti-cp and Ti6Al4V alloy for the improvement of fibroblast adhesion and alignment and the reduction of bacterial adhesion
Source abstract
Abstract
Surface texturing is widely investigated for the modulation of the surface properties and biological response of implantable materials. Laser is a green technology for the obtainment of specific patterns without the employment of toxic chemicals. In the present research, a picosecond laser treatment was applied to commercially pure titanium and Ti6Al4V alloy for the obtainment of aligned grooves characterized by micrometric width and spacing but submicrometric depth to promote fibroblast alignment and discourage bacterial adhesion. Surface topography and roughness of laser-textured surfaces were characterized using confocal microscopy, contact profiler, and Scanning Electron Microscopy. Zeta potential titration curves and contact angle measurements were used for the investigation of surface charge and wettability, while X-Ray Diffraction was employed for crystallographic characterization. Finally, the biological response (fibroblast adhesion and alignment and bacterial adhesion) was assessed. Similar results were obtained on commercially pure Ti and Ti6Al4V. Grooves with the designed features were obtained (about 15 μm spaced and 0.2μ deep) and the treated surfaces had a complex micro- and nano-scale morphology which reduced wettability. No evident chemical modification occurred. The treated surfaces were biocompatible and grooves had a contact guidance effect on human fibroblasts. The obtained topography had anti-adhesive action on bacteria (Staphylococcus aureus).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Additive manufacturing processes in medical applications10.3390/ma14010191 ↗
2. Porous titanium by additive manufacturing: a focus on surfaces for bone integration10.3390/met11091343 ↗
3. Treatment of periodontitis and peri-implantitis with an Er: YAG laser: experimental and clinical studies10.1016/j.mla.2005.02.005 ↗
4. Peri-implant care with the CO2 laser: in vitro and in vivo results10.1016/j.mla.2005.02.002 ↗
5. Analysis of the influence of surface treatment by high-power laser irradiation on the surface properties of titanium dental implants: a systematic review10.1016/j.prosdent.2021.07.026 ↗
6. Protein absorption on titanium surfaces treated with a highpower laser: a systematic review
7. Nano-scale modification of titanium implant surfaces to enhance osseointegration10.1016/j.actbio.2019.05.045 ↗
8. Advancing dental implant surface technology – from micron to nanotopography10.1016/j.biomaterials.2008.05.012 ↗
9. Surface treatments of titanium dental implants for rapid osseointegration10.1016/j.dental.2006.06.025 ↗
10. Race to invade: understanding soft tissue integration at the transmucosal region of titanium dental implants10.1016/j.dental.2021.02.005 ↗
11. Orchestrating soft tissue integration at the transmucosal region of titanium implants10.1016/j.actbio.2021.01.001 ↗
12. A review of dental implants and infection10.1016/j.jhin.2009.02.010 ↗
13. Laser surface textured titanium alloy (Ti–6Al–4V) – Part II – studies on bio-compatibility10.1016/j.apsusc.2015.08.255 ↗
14. Laser surface treatment and the resultant hierarchical topography of Ti grade 2 for biomedical application10.1016/j.apsusc.2016.08.105 ↗
15. Surface modification of porous titanium discs using femtosecond laser structuring10.3390/met10060748 ↗
16. Femtosecond laser treatment promotes the surface bioactivity and bone ingrowth of Ti6Al4V bone scaffolds
17. Dual-functionalized titanium by ultrafast laser texturing to enhance human gingival fibroblasts adhesion and minimize Porphyromonas gingivalis colonization10.1016/j.apsusc.2022.154784 ↗
18. Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation10.1016/j.apsusc.2015.10.102 ↗
19. https://www. https://www.geass.it/en/synthegra (accessed 20 November 2023).
20. A retrospective case series evaluating Branemark BioHelix implants placed in a specialist private practice following 'conventional' procedures. One-year results after placement
21. 2017 · 1
22. Effect of nanoporous TiO2 coating and anodized Ca2+ modification of titanium surfaces on early microbial biofilm formation10.1186/1472-6831-11-8 ↗
23. The influence of titanium abutment surface roughness on plaque accumulation and gingivitis: short term observations
24. In vivo study of the initial bacterial adhesion on different implant materials10.1016/j.archoralbio.2013.04.011 ↗
25. Detection and partial characterization of extracellular inducers of persistence in Staphylococcus epidermidis and Staphylococcus aureus10.1099/jmm.0.001392 ↗
26. Cytocompatible and anti-bacterial adhesion nanotextured titanium oxide layer on titanium surfaces for dental and orthopedic implants10.3389/fbioe.2019.00103 ↗
27. Reversible daptomycin tolerance of adherent staphylococci in an implant infection model10.1128/AAC.00172-11 ↗
28. Antimicrobial properties of 8-hydroxyserrulat-14-en-19-oic acid for treatment of implant-associated infections10.1128/AAC.01735-12 ↗
29. Correlation between biofilm-formation and the antibiotic resistant phenotype in Staphylococcus aureus isolates: a laboratory-based study in Hungary and a review of the literature10.2147/IDR.S303992 ↗
30. Altering in vivo macrophage responses with modified polymer properties10.1016/j.biomaterials.2015.03.042 ↗
31. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
32. Fibre laser treatment of beta TNZT titanium alloys for load-bearing implant applications: effects of surface physical and chemical features on mesenchymal stem cell response and Staphylococcus aureus bacterial attachment10.3390/coatings9030186 ↗
33. Electron beam structuring of Ti6Al4V: new insights on the metal surface properties influencing the bacterial adhesion10.3390/ma13020409 ↗
34. Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 210.1016/j.jmatprotec.2018.11.026 ↗
35. Contact angle measurement on dental implant biomaterials10.1563/1548-1336(1999)025<0230:CAMODI>2.3.CO;2 ↗
36. Surface characterizations of variously treated titanium materials
37. The mechanical and chemical stability of the interfaces in bioactive materials: the substrate-bioactive surface layer and hydroxyapatite bioactive surface layer interfaces10.1016/j.msec.2020.111238 ↗
38. Orthopedic applications of silicon nitride ceramics10.1016/j.actbio.2012.04.031 ↗
39. Ph dependent surface charging and point of zero charge. IV. Update and new approach10.1016/j.jcis.2009.04.072 ↗
40. Luxbacher · 2014
41. Review of the mechanical behavior of different implant-abutment connections10.3390/ijerph17228685 ↗
42. Dental implant infections10.1086/516243 ↗
43. Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants — is one truly better than the other?10.1016/j.msec.2016.01.032 ↗
44. Some soft tissue characteristics at implant abutments with different surface topography. A study in humans10.1034/j.1600-051X.2003.10026.x ↗
45. Gingival response to dental implant: comparison study on the effects of new nanopored laser-treated vs. Traditional healing abutments10.3390/ijms21176056 ↗
46. Fabrication and biocompatibility of polypyrrole implants suitable for neural prosthetics10.1016/j.biomaterials.2004.09.037 ↗
47. The influence of surface topography of ceramic abutments on the attachment and proliferation of human oral fibroblasts10.1016/j.biomaterials.2004.02.037 ↗
48. Fitting pieces into the puzzle: the impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections10.1016/j.cis.2021.102551 ↗
49. Comparing the quantitative fit-testing results of half-mask respirators with various skin barriers in a crossover study design: a pilot study10.1016/j.jhin.2021.02.010 ↗
50. A systematic review of single-tooth restorations supported by implants10.1016/S0736-5748(99)00078-7 ↗
51. Antibacterial and bioactive nanostructured titanium surfaces for bone integration10.1016/j.apsusc.2014.05.056 ↗
52. Effect of local topography on cell division of Staphylococcus spp10.3390/nano12040683 ↗
53. Modelling the interaction between bacterial cells and laser-textured surfaces10.1016/j.surfcoat.2019.06.078 ↗