journal article·2020-11Open access

Comparative study of HDPE composites reinforced with microtalc and nanotalcs: high performance filler for improving ductility at low concentration levels

Giovanni Savini, Rodrigo L. Oréfice

Abstract

Binary high-density polyethylene (HDPE) composites with natural microtalc (TN), semicrystalline synthetic nanotalc (NTC) and amorphous synthetic (NTA) nanotalc with 1% m/m content were prepared by mixing in the molten state in a twin-screw extruder followed by injection molding. The thermal properties were investigated by thermogravimetric analysis (TGA) and by differential scanning calorimetry (DSC) and showed that the thermal stability of the composites was slightly improved with the incorporation of talcs. The morphology of composites, studied using scanning electron microscopy (SEM), revealed a good dispersion of synthetic talc in composites. The dynamic-mechanical (DMA) properties of the samples were analyzed and showed that the storage modulus was improved with the incorporation of talcs. The tensile strength and impact strength showed a moderate drop for all composites, up to 7.5% and 8.4% respectively, while the elongation at break showed a marked gain of 50% for the HDPE/NTA sample. These results suggest that NTA particles act, with great efficiency, as an internal lubricating agent or plasticizer. This research showed that NTA is a favorable filler when the main objective is to improve the ductility and the rigidity/toughness balance of HDPE and when some loss of tensile strength and impact resistance are tolerated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Polyamide blend-based nanocomposites: a review10.3144/expresspolymlett.2015.22 ↗
2. Polyamide-6/clay nanocomposites: a critical review
3. Mechanical, morphological, and thermal properties of nanotalc reinforced PA6/SEBS-g-MA composites10.1002/app.41381 ↗
4. The influence of loading rate and concurrent microstructural evolution in micrometric talc- and wollastonite-reinforced high isotactic polypropylene composites10.1016/j.msea.2004.03.035 ↗
5. Optimization of the crystallinity of polypropylene/submicronic-talc composites: the role of filler ratio and cooling rate10.3144/expresspolymlett.2016.22 ↗
6. Influence of platelet aspect ratio and orientation on the storage and loss moduli of HDPE-mica composites10.1016/j.polymer.2004.09.056 ↗
7. Non-isothermal crystallization kinetics of calcium carbonate-filled β-crystalline phase polypropylene composites10.1002/(SICI)1097-0126(199709)44:1<95::AID-PI821>3.0.CO;2-L ↗
8. Mechanical and thermal properties of high-density polyethylene toughened with glass beads10.1002/app.12339 ↗
9. Mechanical and thermal performance of high-density polyethylene/alumina nanocomposites10.1080/00222348.2012.733297 ↗
10. On processing and impact deformation behavior of high density polyethylene (HDPE)-calcium carbonate nanocomposites10.1002/mame.200800300 ↗
11. Fabrication of super-ductile PP/LDPE blended parts with a chemical blowing agent10.1002/app.44101 ↗
12. Melting and crystallization behavior of partially miscible high density polyethylene/ethylene vinyl acetate copolymer (HDPE/EVA) blends10.1016/j.tca.2014.04.007 ↗
13. Structure-property relationships on uniaxially oriented carbon nanotube/polyethylene composites10.1016/j.polymer.2011.01.008 ↗
14. Fracture toughness of high density polyethylene/SEBS-g-MA/montmorillonite nanocomposites10.1016/j.compscitech.2006.08.006 ↗
15. Use of new synthetic talc as reinforcing nanofillers for polypropylene and polyamide 6 systems: thermal and mechanical properties10.1016/j.jcis.2013.04.019 ↗
16. Mechanical and thermo-physical properties of high-density polyethylene modified with talc10.1002/app.38945 ↗
17. Synthetic talc as a new platform for producing fluorescent clay polyurethane nanocomposites10.1016/j.clay.2018.03.012 ↗
18. Chemical modification routes of synthetic talc: influence on its nucleating power and on its dispersion state10.1016/j.clay.2015.02.026 ↗
19. Synthetic talc advances: coming closer to nature, added value, and industrial requirements10.1016/j.clay.2013.09.006 ↗
20. Wunderlich · 1976
21. 2014
22. 2018
23. Phyllosilicates synthesis: a way of accessing edges contributions in NMR and FTIR spectroscopies. Example of synthetic talc10.1007/s00269-013-0577-5 ↗
24. Synthetic talc and talc-like structures: preparation, features and applications10.1002/chem.201702763 ↗
25. Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating10.1016/j.clay.2017.06.013 ↗
26. Functionalization of synthetic talc-like phyllosilicates by alkoxyorganosilane grafting10.1039/c0jm01276a ↗
27. Flammability properties of polymer−layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites †10.1021/cm0001760 ↗
28. A study on montmorillonite/polyethylene nanocomposite extrusion-coated paperboard10.1002/pts.670 ↗
29. Processing and characterization of high density polyethylene/ethylene vinyl acetate blends with different VA contents
30. Talc as nucleating agent of polypropylene: morphology induced by lamellar particles addition and interface mineral-matrix modelization10.1023/A:1014929121367 ↗
31. Melt processing of PA-66/clay, HDPE/clay and HDPE/PA-66/clay nanocomposites10.1002/pen.20108 ↗
32. Character of crystallization nuclei in isotactic polypropylene10.1002/app.1982.070270507 ↗
33. Interactions in the system polyethylene-solid filler10.1080/00222348108212839 ↗
34. Orientation in composite of polypropylene and talc10.1002/app.1989.070380806 ↗
35. Polymer/layered silicate nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
36. Recent trends and future outlooks in the field of clay-containing polymer nanocomposites10.1002/macp.201400069 ↗
37. Talc from Puebla de Lillo, Spain. II. Effect of dry grinding on particle size and shape10.1016/S0169-1317(97)00013-6 ↗
38. Dynamic mechanical properties of high density polyethylene and teak wood flour composites10.1007/s00289-013-0941-0 ↗
39. Toughening high density polyethylene submitted to extreme ambient temperatures10.1007/s10965-017-1243-2 ↗
40. Polietileno de Alta Densidade Tenacificado com Elastômero Metalocênico: 1. Propriedades Mecânicas e Características Morfológicas10.1590/S0104-14282002000200006 ↗
41. Functionalized-graphene/ethylene vinyl acetate co-polymer composites for improved mechanical and thermal properties10.1016/j.polymertesting.2011.12.003 ↗
42. Effect of PEgMA/amine silane compatibilizer on clay dispersion of polyethylene-clay nanocomposites10.1007/s00289-009-0170-8 ↗
43. Largely enhanced ductility of immiscible high density polyethylene/polyamide 6 blends via nano-bridge effect of functionalized multiwalled carbon nanotubes10.1002/pat.1796 ↗
44. Canevarolo · 2004 · vol. 01 · 361