journal article·2021-05Open access

Experimental study of grain structures evolution and constitutive model of isothermal deformed 2A14 aluminum alloy

Qiang Wang, Xiyu He, Yunlai Deng, Jiuhui Zhao, Xiaobin Guo

Abstract

Softening mechanism and microstructure evolution of 2A14 aluminum alloy were studied via isothermal deformation tests under the temperatures range from 573 K to 773 K and strain rates range from 10−3 s−1 to 1 s−1. Microstructures indicated that the grain structure was composed of massive fine sub-grains while only a small quantity of recrystallized grains formed along grain boundaries. The quantity of sub-grains increased with the decrease of deformation temperature or the increase of deformation strain rate, and the correlations between the deformation conditions and the geometrically necessary dislocation (GND) and stored strain energy were illuminated with quantification. The softening mechanism under different conditions was in compliance with the analysis of processing map. The microstructure indicated that the governing dynamic softening mechanism was the dynamic recovery for the temperature below 773 K, and dynamic recrystallization played the dominant role in the softening mechanism at low strain rates for the temperature at 773 K. The Arrhenius constitutive model and physical-based constitutive model considering lattice diffusion have been established, and both two models can well predict the flow stress and GND density of 2A14 aluminum alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Influence of cumulative strain on microstructure and mechanical properties of multi-directional forged 2A14 aluminum alloy10.1016/j.msea.2016.07.072 ↗
2. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
3. Influence of quenching cooling rate on residual stress and tensile properties of 2A14 aluminum alloy forgings10.1016/j.msea.2016.08.017 ↗
4. Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: a comparative study10.1016/j.jallcom.2020.156561 ↗
5. Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy10.1016/j.matchar.2019.109953 ↗
6. Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy10.1016/j.msea.2020.139217 ↗
7. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
8. Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature10.1016/j.msea.2013.12.012 ↗
9. Influence of cooling rate after homogenization on the flow behavior of aluminum alloy 7050 under hot compression10.1016/j.msea.2009.10.055 ↗
10. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
11. Dynamic recovery: sufficient mechanism in the hot deformation of Al (<99.99)10.1016/S0921-5093(00)00933-3 ↗
12. Flow softening behavior and microstructure evolution of Al–5Zn–2Mg aluminum alloy during dynamic recovery10.1016/S1003-6326(14)63026-0 ↗
13. A physical-based constitutive model to describe the strain-hardening and dynamic recovery behaviors of 5754 aluminum alloy10.1016/j.msea.2017.04.086 ↗
14. Influence of strain rate on hot deformation behavior and recrystallization behavior under isothermal compression of Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2019.151788 ↗
15. 3D processing map and hot deformation behavior of 6A02 aluminum alloy10.1016/j.jallcom.2018.01.299 ↗
16. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working10.1016/j.matdes.2010.11.048 ↗
17. Flow stress behavior of porous FVS0812 aluminum alloy during hot-compression10.1016/j.mechrescom.2005.05.008 ↗
18. A simplified approach for developing constitutive equations for modeling and prediction of hot deformation flow stress10.1007/s11661-015-3006-1 ↗
19. Dynamic softening behaviors of 7075 aluminum alloy10.1016/S1003-6326(10)60104-5 ↗
20. A simple constitutive model for prediction of single-peak flow curves under hot working conditions10.1115/1.4032153 ↗
21. Experimental analysis and constitutive modeling for the newly developed 2139-T8 alloy10.1016/j.msea.2009.05.026 ↗
22. Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions10.1016/j.mechmat.2015.02.014 ↗
23. A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation10.1016/j.matdes.2015.04.005 ↗
24. A phenomenological constitutive model for high temperature flow stress prediction of Al–Cu–Mg alloy10.1016/j.msea.2011.12.023 ↗
25. Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 219510.1016/j.jallcom.2018.11.289 ↗
26. A physically-based constitutive model for hot deformation of Ti-10-2-3 alloy10.1016/j.jallcom.2016.11.208 ↗
27. Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy10.1016/j.jmrt.2015.03.001 ↗
28. Physically based modeling and characterization of hot deformation behavior of twinning-induced plasticity steels bearing vanadium and niobium10.1016/j.msea.2017.07.038 ↗
29. Dislocation-mechanics-based constitutive relations for material dynamics calculations10.1063/1.338024 ↗
30. Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperatures10.1016/j.matdes.2013.08.006 ↗
31. Dislocation mechanics-based constitutive equations10.1007/s11661-004-0201-x ↗
32. A comparative study on Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr–1Mo steel10.1016/j.commatsci.2009.09.025 ↗
33. A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels10.1016/j.mechmat.2015.11.013 ↗
34. Constitutive equation and hot deformation behavior of homogenized Al–7.68Zn–2.12Mg–1.98Cu–0.12Zr alloy during compression at elevated temperature10.1016/j.msea.2014.04.055 ↗
35. Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation10.1016/j.matdes.2019.108181 ↗
36. Modeling of flow stress of AA6061 under hot compression using artificial neural network
37. A new method for evaluation of friction in bulk metal forming10.1016/j.jmatprotec.2004.03.029 ↗
38. Microstructure and hot deformation behavior of a new aluminum–lithium–copper based AA2070 alloy10.1016/j.msea.2020.139048 ↗
39. A study of the heterogeneity of plastic deformation in IF steel by EBSD10.1016/j.msea.2012.03.068 ↗
40. Cooperative enhancements in ductility and strain hardening of a solution-treated Al–Cu–Mn alloy at cryogenic temperatures10.1016/j.msea.2020.139707 ↗
41. EBSD, XRD and SRS characterization of a casting Al-7wt%Si alloy processed by equal channel angular extrusion: dislocation density evaluation10.1016/j.matchar.2019.04.044 ↗
42. Improving the mechanical properties of 2219-T6 aluminum alloy joints by ultrasonic vibrations during friction stir welding10.1016/j.jmatprotec.2019.03.013 ↗
43. Microstructure of individual grains in cold-rolled aluminium from orientation inhomogeneities resolved by electron backscattering diffraction10.1016/j.msea.2007.10.092 ↗
44. Changes of flow stress and microstructure during hot deformation of Al-1Mg-1Mn10.1179/mst.1990.6.5.453 ↗
45. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
46. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
47. Continuous dynamic recrystallization in an Al–Li–Mg–Sc alloy during equal-channel angular extrusion10.1016/j.msea.2005.01.053 ↗
48. Constitutive modelling, dynamic globularization behavior and processing map for Ti-6Cr-5Mo-5V-4Al alloy during hot deformation10.1016/j.jallcom.2019.05.031 ↗
49. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
50. Hot deformation behavior of a medium carbon microalloyed steel10.1016/j.msea.2011.01.098 ↗
51. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
52. Constitutive analysis in hot working10.1016/S0921-5093(01)01117-0 ↗
53. Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation10.1016/j.matchemphys.2014.12.023 ↗
54. Constitutive relationships for hot deformation of austenite10.1016/j.actamat.2011.07.008 ↗
55. Frost · 1982
56. Flow behaviour of medium carbon micro-alloyed steel under hot working conditions10.1179/mst.1996.12.7.579 ↗
57. Microstructural evolution and constitutive analysis combined with weight optimization method of Al-7.82Zn-1.96Mg-2.35Cu-0.11Zr alloy during hot deformation10.1016/j.jallcom.2017.10.246 ↗
58. Flow behavior of Al–6.2Zn–0.70Mg–0.30Mn–0.17Zr alloy during hot compressive deformation based on Arrhenius and ANN models10.1016/S1003-6326(17)60071-2 ↗