Effect of Ni addition on bainite microstructure of low-carbon special bar quality steels and its influence on CCT diagrams
Source abstract
Abstract
This work presents the effect of Ni content on the bainite morphology and in the mechanical properties of low-carbon special bar quality steels. Four steel ingots with the same base chemical composition, having only Ni content as their main difference, were melted in a pilot scale vacuum induction melting furnace, hot forged into square bars followed by cooling in still air to room temperature. Samples for Charpy-V notch tests of every steel were tempered to equalize their hardness level. Through dilatometry tests, it was found that Ni slows down the transformation kinetics of ferrite and pearlite phases, and, acts in favor of bainite and martensite formation. In low-carbon bainitic steels, Ni also favors the formation of lower bainite at the expanse of upper bainite. The steels with lower Ni contents, 0.03 % and 0.70 %, have their microstructures mostly composed of upper bainite, with clusters of alloy carbides precipitated in the boundaries of the bainitic ferrite packages. The clusters of hard carbides act as stress raisers, facilitating the propagation of cracks, and, reducing the toughness of the steels. The other two steels studied with higher Ni, 1.40 % and 2.75 %, showed superior hardenability and predominant microstructures of lower bainite and martensite, respectively. The steels composed of lower bainite and martensite have higher toughness than the steels with upper bainite due to their more refined microstructure and homogenous dispersion of the alloy carbides in the steel matrix. It was also observed in the bainitic steels that tempering does not influence the location where the alloy carbides precipitated during bainite transformation. After tempering, these carbides remain at the bainitic ferrite boundaries or dispersed in the bainitic ferrite packages depending on the type of bainite formed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Thelning · 1984 · vol. 2 · 678p
2. Heat treatment and effects of Cr and Ni in low alloy steel10.1007/s12034-011-0340-9 ↗
3. American Society For Metals · 1991
4. American Society For Metals · 1991
5. Microstructural evolution of HSLA ISO 3183 X80M (API 5L X80) friction stir welded joints
6. Properties of calcium-treated plastic mould steels
7. The influence of non-metallic inclusions on the machinability of free-machining steels
8. Kiessling · 1968 · 118p
9. Mequita · 2010
10. A comparative study on non-quenched and quenched prehardened steel for large section plastic mould10.1016/j.jmatprotec.2009.04.019 ↗
11. Development of a new prehardened mold steel with improved machining, welding, polishing and conducting capacities
12. Microstructure and properties of big section microalloyed steel in unquenched and untempered for moulds
13. Roberts · 1998 · 364p
14. Development of non-quenched non-tempered bainitic steel for plastic mould: continous cooling transformation behaviour
15. Study on microstructure and hardness uniformity of non-quenched prehardened steel for large section plastic mould10.1016/j.msea.2008.04.055 ↗
16. Hippenstiel · 2004 · 328p
17. Stahl · 1999 · 736p
18. American Society For Testing And Materials · 2008
19. Effects of Ni and Cr on cryogenic impact toughness of bainite/martensite multiphase steels10.1007/s12540-019-00262-x ↗
20. Refined bainite microstructure and mechanical properties of a high-strength low-carbon bainitic steel treated by austempering below and above ms10.1002/srin.201700469 ↗
21. Effect of Ni addition on bainite transformation and properties in a 2000 MPa grade ultrahigh strength bainitic steel10.1007/s12540-018-0139-y ↗
22. Bacalhau · 2012
23. Bacalhau · 2015
24. Effect of Ni on the bainitic microstructure of a new steel used in the manufacture of screws and barrels for plastic processing
25. Bacalhau
26. Edelstahl Witten-Krefeld Gmbh
27. 2002 · 26p
28. Orientation and phase mapping in the transmission electron microscope using precession-assisted diffraction spot recognition: state-of-the-art results10.1111/jmi.12065 ↗
29. Ghamarian · 2017