Effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of a new C–Cr–Mo–V alloy steel used in TBM cutter ring
Source abstract
Abstract
Tunnel boring machine (TBM) cutter ring material is a type of C–Cr–Mo–V alloy steel which possesses high hardness and wear resistance. To systematically study the effect of tempering temperature on the microstructure, mechanical properties and abrasive wear behavior of TBM cutter ring, a new C–Cr–Mo–V alloy steel (DB3) was subjected to tempering treatment and abrasive wear test. The results indicate that the tempering temperature controlled the hardness and toughness by adjusting the amount of precipitates and austenite transformation. Outstanding mechanical properties were obtained upon tempering at 520 °C. The wear resistance of DB3 steel was mainly controlled by hardness under non-impact abrasive wear condition. However, under the condition of impact abrasive wear, the wear resistance of DB3 steel was affected by hardness and toughness, and only in a certain range of toughness, the wear resistance increased with the increase of hardness. The experimental results can provide some reference for the heat treatment process of DB3 steel used in TBM cutter ring.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. The Ceneri base tunnel: construction experience with the southern portion of the flat railway line crossing the Swiss Alps10.1016/j.eng.2017.09.004 ↗
2. Comparison of the mechanical performance between two-stage and flat-face cutter head for the rock tunnel boring machine (TBM)10.1007/s12206-015-0425-2 ↗
3. Geological and mechanical rock mass conditions for TBM performance prediction. The case of “La Maddalena” exploratory tunnel, Chiomonte (Italy)10.1016/j.tust.2018.02.012 ↗
4. Numerical and experimental research on the rock-breaking process of tunnel boring machine normal disc cutters10.1007/s12206-016-0329-9 ↗
5. Experimental study on wear of TBM disc cutter rings with different kinds of hardness10.1016/j.tust.2018.08.050 ↗
6. Analysis and prediction of TBM disc cutter wear when tunneling in hard rock strata: a case study of a metro tunnel excavation in Shenzhen, China10.1016/j.wear.2020.203190 ↗
7. Cutter change time and cutter consumption for rock TBMs10.1016/j.tust.2021.104000 ↗
8. A practical TBM cutter wear prediction model for disc cutter life and rock wear ability10.1016/j.tust.2018.12.010 ↗
9. Wear performance and mechanisms of H13 steels sliding against different Rock types10.1088/2051-672X/ab8501 ↗
10. Wear characteristics of TBM disc cutter ring sliding against different types of rock10.1007/s12205-020-2208-2 ↗
11. Experimental study on wear behaviors of TBM disc cutter ring in hard rock conditions10.1080/10402004.2018.1442895 ↗
12. Experimental study of specific matching characteristics of tunnel boring machine cutter ring properties and rock10.1016/j.wear.2017.01.072 ↗
13. Analysis of the settlement of an existing tunnel induced by shield tunneling underneath10.1016/j.tust.2018.06.035 ↗
14. Prediction of disc cutter life during shield tunneling with AI via the incorporation of a genetic algorithm into a GMDH-type neural network10.1016/j.eng.2020.02.016 ↗
15. Effect of tempering and cryogenic treatment on wear and mechanical properties of hot work tool steel (H13)10.1016/j.matpr.2021.01.361 ↗
16. Effects of conventional heat treatment on wear resistance of AISI H13 tool steel10.1016/j.wear.2004.09.008 ↗
17. Interpreting H13 steel wear behavior for austenitizing temperature, tempering time and temperature
18. Evolution of microstructure and mechanical properties during tempering of M50 steel with bainite/martensite duplex structure10.1016/j.jmrt.2020.04.075 ↗
19. Influence of nickel on secondary hardening of a modified AISI H13 hot work die steel10.1002/mawe.201700205 ↗
20. Effects of tempering mode on the structural changes of martensite10.1016/j.msea.2016.07.092 ↗
21. Effect of tempering temperature on the microstructure and properties of ultrahigh-strength stainless steel10.1016/j.jmst.2019.01.009 ↗
22. Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel10.1016/j.msea.2020.139520 ↗
23. The effect of tempering on the microstructure and mechanical properties of a novel 0.4C press-hardening steel10.3390/app9204231 ↗
24. Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels10.1016/j.wear.2019.203098 ↗
25. Effect of Tempering temperature on microstructures and wear behavior of a 500 HB grade wear-resistant steel10.3390/met9010045 ↗
26. Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel10.1016/j.triboint.2011.03.005 ↗
27. Effects of heat treatment on wear resistance and fracture toughness of duo-cast materials composed of high chromium white cast iron and low-chromium steel10.1007/s11661-006-0035-9 ↗
28. Effect of interaction between cementite and pearlite on two-body abrasive wear behaviors in white cast iron10.1007/s40544-020-0415-y ↗
29. Impact of short range ordering on the anomalous four-stage strain hardening behavior of low solid-solution hardening Ni–Cr alloys10.1016/j.msea.2021.141193 ↗
30. Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel10.1016/j.triboint.2011.03.005 ↗
31. Effect of carbon content on microstructural evolution of 8Cr steel in austenitizing process10.1016/j.msea.2020.140026 ↗
32. Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel10.1016/S1006-706X(11)60118-0 ↗
33. Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering10.1016/j.msea.2016.12.019 ↗
34. Effect of (Fe,Cr)(7)C(3) carbide orientation on abrasion wear resistance and fracture toughness10.1016/j.wear.2010.10.070 ↗
35. Role of retained austenite with different morphologies on sub-surface fatigue crack initiation in advanced bainitic steels10.1016/j.scriptamat.2020.03.036 ↗
36. Retained austenite transformation during heat treatment of a 5wt.% Cr cold work tool steel10.1007/s11661-017-4232-5 ↗
37. Effect of deep cryogenic treatment on carbon segregation in Cr8Mo2SiV tool steel during tempering10.1080/09500839.2016.1250966 ↗
38. Effects of cryogenic treatment types on the performance of coated tungsten tools in the turning of AISI H11 steel10.1016/j.jmrt.2020.03.038 ↗
39. X-ray studies of the structure of quenched carbon steel10.1038/122475a0 ↗
40. Martensite crystal lattice, mechanism of austenite-martensite transformation and behavior of carbon atoms in martensite10.1007/BF02644066 ↗
41. The effect of carbon content on the c/a ratio of as-quenched martensite in Fe-C alloys10.1016/j.msea.2017.05.094 ↗
42. Microstructure and mechanical properties of Cr14 ultra-high-strength steel at different tempering temperatures around 773 K10.1016/j.msea.2017.05.060 ↗
43. Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era10.1016/j.mattod.2016.07.002 ↗
44. Investigation of clusters in medium carbon secondary hardening ultra-high-strength steel after hardening and aging treatments10.1007/s11661-015-2843-2 ↗
45. Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel10.1016/j.matchar.2018.07.038 ↗
46. Effect of carbides on the creep properties of a Ni-base superalloy M96310.1016/j.msea.2005.02.038 ↗
47. Ostwald ripening in multicomponent alloys10.1016/0956-716X(93)90191-T ↗
48. Effect of particle hardness on mild–severe wear transition of hard second phase materials10.1016/j.wear.2012.12.016 ↗
49. Aging behavior and strengthening mechanisms of coarsening resistant metastable θ' precipitates in an Al-Cu alloy10.1016/j.matdes.2020.109378 ↗
50. Effect of solid-solution temperature on the microstructure and properties of ultra-high-strength ferrium S53® steel10.1016/j.msea.2018.05.099 ↗
51. Mechanisms of Guiniere-Preston zone hardening in the athermal limit10.1016/j.actamat.2010.06.055 ↗
52. Nano-scale characterisation of sheared β" precipitates in a deformed Al-Mg-Si alloy10.1038/s41598-019-53772-4 ↗
53. Microstructural and mechanical characteristics of novel 6% Cr cold-work tool steel10.3390/met7010012 ↗
54. The evolution of complex carbide precipitates in a low alloy Cr–Mo–V steel after long-term aging treatment10.3390/ma12101724 ↗
55. Effects of carbon content and sliding ratio on wear behavior of high-vanadium high-speedsteel (HVHSS) under high-stress rolling–sliding contact10.1016/j.triboint.2013.09.021 ↗
56. Role of fracture toughness in impact-abrasion wear10.1016/j.wear.2019.03.028 ↗
57. Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels
58. Repetitive impact wear behaviors of the tempered 25Cr3Mo2NiWV Fe-based steel
59. Comparison of impact-abrasive wear characteristics and performance of direct quenched (DQ) and direct quenched and partitioned (DQ&P) steels10.1016/j.wear.2017.12.016 ↗
60. Experimental study on wear behaviors of TBM disc cutter ring under drying, water and seawater conditions10.1016/j.wear.2017.09.020 ↗
61. Microstructure evolution and abrasive wear behavior of D2 steel10.1016/j.wear.2015.02.019 ↗
62. Wear behaviour of iron matrix composite reinforced by ZTA particles in impact abrasion
63. Effect of matrix hardness on the impact abrasive wear performance of ZTAp/steel architecture composite10.1088/2053-1591/abe019 ↗