Multiscale microstructures, mechanical properties and electrical conductivity of in-situ dual-size TiB2 particles reinforced 6201 aluminum matrix composites
Source abstract
Abstract
The design of high-performance overhead aluminum wires is challenging, due to the intrinsic trade-off of strength-ductility and strength-electrical conductivity (EC). The in-situ halide salt reactions were used to introduce dual-size TiB2 particles into 6201 alloy to obtain out-bound mechanical properties with slight sacrifice of EC. With this strategy, the ultimate tensile strength, elongation after fracture and EC of the 4 wt%TiB2/6201Al composite are 360.9 MPa, 8.27% and 53.5% IACS, respectively, and these properties of the reference 6201 alloy are 325.0 MPa, 7.8% and 56.06% IACS. In the as-cast state, the majority of sub-micron TiB2 particles are segregated at the grain boundaries (termed as GBPs), forming a network pattern. The network is stretched along the rolling direction (RD) during deformation, and the orientation of GBPs is also rearranged from chaotic to a position with c axis nearly normal to the RD. In addition, semi-coherent particle/matrix interface is formed, which play a crucial role in strengthening the matrix. To optimize the EC, neutralization by adding Al–3B master alloy was performed, thus successfully eliminating the detrimental Al3Ti phase and precipitating excessive solute Ti atoms. The results show that not only the EC, but also the strength and ductility maximize at a composition around B:Ti = 2.0.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Modification of AA-6201 alloy for manufacturing of high conductivity and extra high conductivity wires with property of high tensile stress after artificial aging heat treatment for all-aluminium alloy conductors10.1016/j.matdes.2005.06.005 ↗
2. Influence of AlB2 compound on elimination of incoherent precipitation in artificial aging of wires drawn from redraw rod extruded from billets cast of alloy AA-6101 by vertical direct chill casting10.1016/j.matdes.2007.06.004 ↗
3. Mechanical properties of novel aluminum metal matrix metallic composites: application to overhead conductors10.1016/j.matdes.2015.08.109 ↗
4. Strength-conductivity synergy in cold-drawn reduced graphene oxide (RGO)-aluminum composite wires for electrical applications10.1016/j.matdes.2021.109951 ↗
5. Understanding the precipitation mechanism of copper-bearing phases in Al-Mg-Si system during thermo-mechanical treatment10.1016/j.jmst.2021.04.026 ↗
6. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity10.1016/j.scriptamat.2013.12.002 ↗
7. Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al-Mg-Si alloys10.1016/j.actamat.2015.07.039 ↗
8. Research of rolling-drawing coupled deformation on the microstructure-property evolution and strengthening mechanism of 6201 conductive tubes10.1016/j.jmrt.2022.04.085 ↗
9. Al-4 wt% Cu composite reinforced with in-situ TiB2 particles10.1016/S1359-6454(97)00075-X ↗
10. TiB2 reinforced aluminum based in situ composites fabricated by stir casting10.1016/j.msea.2014.12.033 ↗
11. Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite10.1016/j.actamat.2019.11.068 ↗
12. Enhancing strength and ductility of AlSi10Mg fabricated by selective laser melting by TiB2 nanoparticles10.1016/j.jmst.2021.08.030 ↗
13. Microstructures, mechanical properties, and aging behavior of hybrid-sized TiB2 particulate-reinforced 2219 aluminum matrix composites10.1016/j.msea.2021.142180 ↗
14. Influence of heat treatment on microstructure evolution and mechanical properties of TiB2/Al 2024 composites fabricated by directed energy deposition10.1016/j.jmrt.2020.10.014 ↗
15. Selective laser melting of high-strength TiB2/AlMgScZr composites: microstructure, tensile deformation behavior, and mechanical properties10.1016/j.jmrt.2021.11.150 ↗
16. Effect of Y-modified TiB2 ceramic particles on the microstructure and mechanical properties of TIG welded joints of spray-formed 7055 aluminum alloy10.1016/j.jmrt.2022.08.077 ↗
17. Properties of reactively cast aluminium–TiB2 alloys10.1179/mst.1993.9.10.833 ↗
18. Development of TiB2 reinforced aluminum foundry alloy based in situ composites - Part I: an improved halide salt route to fabricate Al-5wt%TiB2 master composite10.1016/j.msea.2014.02.088 ↗
19. Development of TiB2 reinforced aluminum foundry alloy based in situ composites - Part II: enhancing the practical aluminum foundry alloys using the improved Al-5wt%TiB2 master composite upon dilution10.1016/j.msea.2014.03.021 ↗
20. Multi-scale study of microstructure evolution in hot extruded nano-sized TiB2 particle reinforced aluminum composites10.1016/j.matdes.2016.12.070 ↗
21. Microstructure and mechanical properties of in-situ TiB2/AlSi7Mg composite via powder metallurgy and hot extrusion10.1016/j.jmrt.2022.05.117 ↗
22. The effect of TiB2 ceramic particles on Portevin–Le Chatelier behavior of TiB2/AlMg metal matrix composites10.1016/j.jmrt.2021.07.135 ↗
23. Understanding the influencing mechanism of sub-micron sized TiB2p on the microstructures and properties of rheological squeeze casting hypereutectic Al–Si alloys10.1016/j.jmrt.2021.06.048 ↗
24. TiC-TiB2 composites: a review of phase relationships, processing and properties10.1016/j.jeurceramsoc.2007.11.011 ↗
25. Material properties of titanium diboride10.6028/jres.105.057 ↗
26. Size control of in situ synthesized TiB2 particles in molten aluminum10.1007/s11661-021-06260-2 ↗
27. Nanoparticle promoted solution treatment by reducing segregation in AA703410.1016/j.msea.2021.141691 ↗
28. Nano-treating promoted solute dissolution for novel high strength Al-Cu-Mg alloys10.1016/j.mtla.2022.101466 ↗
29. Achieving strength-ductility synergy in semi-solid squeeze cast 6TiB2/Al–17Si–4Cu composites by heat treatment10.1016/j.jmrt.2022.10.080 ↗
30. Effects of ultrasonic vibration treatment on particles distribution of TiB2 particles reinforced aluminum composites10.1016/j.msea.2016.10.103 ↗
31. Preparation of in-situ 5 vol% TiB2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process10.1016/j.matdes.2016.01.023 ↗
32. Improvement of particles distribution of in-situ 5 vol% TiB2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment10.1016/j.jallcom.2016.09.013 ↗
33. Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites10.1016/j.msea.2022.142958 ↗
34. Fundamental studies of ultrasonic melt processing10.1016/j.ultsonch.2018.12.028 ↗
35. The application of external fields to the manufacturing of novel dense composite master alloys and aluminum-based nanocomposites10.1007/s11661-015-2850-3 ↗
36. Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt10.1016/S1350-4177(02)00158-X ↗
37. Manipulating the particle distribution of in situ TiB2p/Al composites via acoustic vibration and cooling rate10.1016/j.matlet.2019.127063 ↗
38. Three orthogonally arranged ultrasounds modulate solidification microstructures and mechanical properties for AZ91 magnesium alloy10.1016/j.actamat.2022.118382 ↗
39. Strength and ductility enhancement of high-entropy FeCoNi2Al0.9 alloy by ultrasonically refining eutectic structures10.1016/j.scriptamat.2022.115154 ↗
40. Application of synchrotron radiation X-ray computed tomography to investigate the agglomerating behavior of TiB2 particles in aluminum10.1016/j.jallcom.2014.10.190 ↗
41. Electron microscope study of Al-Fe-Si intermetallics in 6201 aluminum alloy10.1007/BF02649760 ↗
42. The effect of strontium on the Mg2Si precipitation process in 6201 aluminum alloy10.1007/s11661-997-0265-5 ↗
43. Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification10.1016/j.jmst.2019.08.053 ↗
44. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
45. TEM investigation of heterogeneous nucleation mechanisms in Al-Si alloys10.1016/S0022-3093(02)01992-0 ↗
46. Grain refining mechanism in the Al/Al-Ti-B system10.1016/j.actamat.2014.10.055 ↗
47. The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys10.1016/j.actamat.2021.116652 ↗
48. Interaction between nucleant particles and a solid-liquid interface in Al-4.5Cu alloy10.1016/j.actamat.2021.116956 ↗
49. Crystallography of engulfed and pushed TiB2 particles in aluminium10.1016/j.scriptamat.2007.08.009 ↗
50. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
51. The effect of interface atomic structure on the deformation mechanisms of Ti2AlN/TiAl composite under nanoindentation using MD simulations10.1088/1361-648X/aafd0e ↗
52. Problems of plastic gliding10.1088/0959-5309/52/1/303 ↗
53. Fracture and strength of solids10.1088/0034-4885/12/1/309 ↗
54. Effect of electron concentration on electrical conductivity in in situ Al-TiB2 nanocomposites10.1063/1.5129817 ↗
55. Understanding and designing metal matrix nanocomposites with high electrical conductivity: a review10.1007/s10853-022-07010-4 ↗
56. Removal of vanadium from molten aluminum-Part I. Analysis of VB2 formation10.1007/s11663-013-9974-x ↗
57. Removal of vanadium from molten aluminum-Part II. Kinetic analysis and mechanism of VB2 formation10.1007/s11663-013-9975-9 ↗
58. Removal of vanadium from molten aluminum-Part III. Analysis of industrial boron treatment practice10.1007/s11663-013-0017-4 ↗
59. Thermodynamic and kinetic analyses of the removal of impurity titanium and vanadium from molten aluminum for electrical conductor applications10.1007/s11663-021-02241-3 ↗
60. Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of AA1070 aluminum10.1016/j.matdes.2015.06.149 ↗
61. Study on the improvement of electrical conductivity and mechanical properties of low alloying electrical aluminum alloys10.1016/j.compositesb.2016.11.042 ↗
62. The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment10.1016/j.jallcom.2019.02.242 ↗
63. The improvement of boron treatment efficiency and electrical conductivity of AA1070Al achieved by trace Ti assistant10.1016/j.jallcom.2017.11.099 ↗
64. Formation mechanism of TiB2 nanoparticles and development of TiB2p/6201 nanocomposites as a neoteric conducting material10.1016/j.jallcom.2022.165461 ↗
65. A study on microstructure and mechanical properties of Al 6061-TiB2 in-situ composites10.1016/j.msea.2011.02.024 ↗
66. In situ observations of interaction between particulate agglomerates and an advancing planar solid/liquid interface: microgravity experiments10.1016/S0022-0248(99)00198-0 ↗
67. Electrical resistivity of metal matrix composites10.1016/S1359-6454(03)00462-2 ↗
68. Modeling the electrical resistivity of deformation processed metal-metal composites10.1016/j.actamat.2014.06.013 ↗
69. Bulk Cu-NbC nanocomposites with high strength and high electrical conductivity10.1016/j.jallcom.2018.02.215 ↗
70. The electrical resistivity of dislocations10.1080/14786436308209092 ↗
71. The dynamic mechanical response of Al2O3 and TiB2 particulate reinforced aluminum matrix composites produced by in-situ reaction10.1016/S0167-577X(98)00129-3 ↗
72. Low-cycle fatigue behavior of Al-based composites containing in situ TiB2, Al2O3 and Al3Ti reinforcements10.1016/S0921-5093(03)00266-1 ↗
73. On the preparation and mechanical properties of in situ small-sized TiB2/Al-4.5Cu composites via ultrasound assisted RD method10.1016/j.jallcom.2018.06.303 ↗
74. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes10.1016/j.matdes.2011.07.037 ↗
75. Investigation of aluminum-based nanocomposites with ultra-high strength10.1016/j.msea.2009.07.067 ↗
76. Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition10.1016/j.compositesb.2017.12.005 ↗
77. Wire-arc directed energy deposition of aluminum alloy 7075 with dispersed nanoparticles10.1115/1.4056257 ↗