journal article·2023-07Open access

Tribological behaviors of LDED Inconel 718 samples polished with a hybrid laser polishing technique

Yufan Liu, Shengyuan Sun, Jiale Wang, Wentai Ouyang, Jihao Xu, Liyuan Sheng, Zifa Xu, Haolei Ru, Yongyue Liu, Junke Jiao

Abstract

A hybrid laser polishing technique consisting of pulsed laser and continuous wave laser was utilized to polish the surface of laser directed energy deposition (LDED) Inconel 718 samples. The resulting surface morphology, microstructure and tribological performance of the polished samples were analyzed. The results showed that an increase in the average thickness of the remelted layer to 50 μm while preserving the columnar microstructure. However, the grain size was reduced. Additionally, the wear rate at 25 °C decreased remarkably by 70.9%, decreasing from 4.5 × 10−3 mm3/(Nm) for the as-fabricated sample to 2.2 × 10−3 mm3/(Nm) for the polished sample at 600 °C. Furthermore, there was a significant decrease in the average coefficient of friction from 0.42 for the as-fabricated sample to 0.29 for the laser-polished sample. To investigate the wear resistance enhancement mechanism of laser polishing, methods such as scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and electron backscatter diffraction (EBSD) were utilized. The results indicated an increase in the Nb and Mo element concentration in the surface layer of the LDED Inconel 718 sample after laser polishing, resulting in the formation of small-sized and homogeneously distributed fine grains with low angle boundaries in the precipitated phase. These features effectively prevented the growth of fatigue cracks and ultimately led to a significant enhancement in wear resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Microstructure and mechanical properties of high chromium nickel-based superalloy fabricated by laser metal deposition10.1016/j.msea.2020.139185 ↗
2. Microstructural and compositional design of Ni-based single crystalline superalloys―A review10.1016/j.jallcom.2018.01.224 ↗
3. Advances in nickel-based cast superalloys10.1007/s12666-010-0036-7 ↗
4. Controlling microstructural and mechanical properties of direct laser deposited Inconel 718 via laser power10.1016/j.jallcom.2021.159588 ↗
5. Effect on microstructural and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting with rescanning by low energy density10.1016/j.jmrt.2020.12.053 ↗
6. Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition10.1016/j.msea.2019.138580 ↗
7. Microstructure modelling of laser metal powder directed energy deposition of alloy 718
8. Effect of laser remelting processing on microstructure and mechanical properties of 17-4 PH stainless steel during laser direct metal deposition10.1016/j.jmatprotec.2020.116738 ↗
9. Analysis of tool wear performance and surface quality in post milling of additive manufactured 316L stainless steel10.1007/s12206-019-0237-x ↗
10. Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition10.1016/j.jmatprotec.2016.09.005 ↗
11. Finishing of additively manufactured titanium alloy by shape adaptive grinding (SAG)10.1088/2051-672X/3/2/024001 ↗
12. Grinding characteristics, material removal, and damage formation mechanisms of zirconia ceramics in hybrid laser/grinding10.1115/1.4039645 ↗
13. Microstructure homogenizations of Ti-6Al-4V alloy manufactured by hybrid selective laser melting and laser deposition manufacturing10.1016/j.msea.2019.05.049 ↗
14. Electrochemical corrosion behaviors before and after laser polishing of additive manufactured TC4 titanium alloy
15. Investigation of electrochemical post-processing procedure for Ti-6Al-4V lattice structure manufactured by direct metal laser sintering (DMLS)10.1007/s00170-019-03996-5 ↗
16. Laser polishing of additively manufactured metal parts: a review10.1080/02670844.2022.2072080 ↗
17. Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components
18. Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components10.1016/j.jmapro.2021.03.014 ↗
19. Effect of laser polishing post-processing technique on the roughness and wear resistance of Inconel 625 deposited by laser cladding on AISI 304L stainless steel10.1007/s11665-021-05962-3 ↗
20. Laser polishing of additive manufactured Ti alloys10.1016/j.optlaseng.2017.02.005 ↗
21. Surface morphology evolution and tribological behavior in nanosecond pulsed laser polishing of S136 mold steel10.1016/j.jmrt.2022.12.153 ↗
22. Material characterization, thermal analysis, and mechanical performance of a laser-polished Ti alloy prepared by selective laser melting10.3390/met9020112 ↗
23. Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr alloys10.1016/j.apsusc.2018.02.246 ↗
24. Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process10.1007/s00170-021-06861-6 ↗
25. Laser polishing of additive manufactured tool steel components using pulsed or continuous-wave lasers10.1007/s00170-019-04205-z ↗
26. Improving the quality of up-facing inclined surfaces in laser powder bed fusion of metals using a dual laser setup10.1016/j.procir.2020.09.050 ↗
27. Novel strategy for quality improvement of up-facing inclined surfaces of LPBF parts by combining laser-induced shock waves and in situ laser remelting10.1016/j.jmatprotec.2020.116981 ↗
28. Hybrid dual laser processing for improved quality of inclined up-facing surfaces in laser powder bed fusion of metals10.1016/j.jmatprotec.2021.117263 ↗
29. Process parameter dependencies of continuous and pulsed laser modes on surface polishing of additive manufactured aluminium AlSi10Mg parts10.1002/mawe.202000335 ↗
30. Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion10.1016/j.actamat.2018.03.017 ↗
31. Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy10.1016/j.actamat.2017.02.007 ↗
32. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties10.1016/j.jallcom.2013.09.171 ↗
33. Laser polishing of additive manufactured superalloy10.1016/j.procir.2018.05.088 ↗
34. Microstructure and wear properties of laser-clad NiCo alloy coating on Inconel 718 alloy10.1016/j.jallcom.2021.160412 ↗
35. Friction behaviors of rough chromium surfaces under starving lubrication conditions10.1016/j.apsusc.2017.09.009 ↗
36. Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel10.1016/j.jmatprotec.2020.117016 ↗
37. Investigation of hardness, wear and magnetic properties of NiCoCrFeZrx HEA prepared through mechanical alloying and spark plasma sintering10.1016/j.jallcom.2021.161924 ↗
38. Properties and high temperature dry sliding wear behavior of boronized Inconel 71810.1007/s11661-019-05577-3 ↗
39. An investigation of the wear mechanism leading to self-replenishing transfer films10.1016/j.wear.2011.08.002 ↗
40. Microstructure and friction properties of GNP/Ni-based superalloy composite coating by laser melting deposition10.1016/j.apsusc.2020.148492 ↗
41. Abrasive wear maps for high velocity oxy fuel (HVOF) sprayed WC-12Co and Cr3C2− 25NiCr coatings10.1016/j.triboint.2017.04.037 ↗
42. Effect of heat treatment on microstructure and tribological behavior of Ti–6Al–4V alloys fabricated by selective laser melting10.1016/j.triboint.2021.106996 ↗
43. A novel intermediate temperature self-lubricating CoCrCu1-xFeNix high entropy alloy fabricated by direct laser cladding
44. An experimental comparison between several active composite actuators for power generation10.1088/0964-1726/15/5/007 ↗
45. Role of graphene additive on wear and electrochemical corrosion behaviour of plasma electrolytic oxidation (PEO) coatings on Mg–MWCNT nanocomposite10.1080/02670844.2019.1689640 ↗
46. Wear rate control of peek surfaces modified by femtosecond laser10.1016/j.apsusc.2015.09.204 ↗
47. Fundamental wear mechanism of metals10.1016/S0043-1648(03)00273-4 ↗
48. Effect of grain size and hardness on fretting wear behavior of Inconel 600 alloys10.1016/j.triboint.2014.08.005 ↗
49. Combining laser transformation hardening and ultrasonic impact strain hardening for enhanced wear resistance of AISI 1045 steel
50. Enhancing the wear and oxidation behaviors of the Inconel 718 by low temperature aluminizing10.1016/j.surfcoat.2021.127069 ↗
51. Mechanisms of sliding wear of metals and alloys at elevated temperatures10.1016/j.triboint.2007.10.003 ↗
52. The role of oxidation in the wear of alloyes10.1016/S0301-679X(98)00008-5 ↗
53. Tribological behaviors and microstructure evolution of Inconel 718 superalloy at mid-high temperature10.1016/j.jmrt.2021.07.102 ↗
54. Laser-induction hybrid cladding of different coatings on rail surface: microstructure, wear properties and contact fatigue behaviors10.1016/j.apsusc.2021.150678 ↗
55. EBSD study of early-damaging phenomena in wheel–rail model test10.1016/j.wear.2015.08.004 ↗
56. Crystal orientation effect on fretting fatigue induced geometrically necessary dislocation distribution in Ni-based single-crystal superalloys10.1016/j.actamat.2019.08.035 ↗
57. A modified Hall–Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing10.1016/j.scriptamat.2012.02.008 ↗
58. Effects of laser peening on residual stresses and fatigue crack growth properties of Ti–6Al–4V titanium alloy10.1016/j.optlaseng.2013.06.011 ↗