journal article·2023-09Open access

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Fei Chen, Fei Liu, Yuan-Biao Tan, Wei Shi, Song Xiang

Abstract

High-density dislocations and nano-twinning are known to significantly influence the work hardening ability of materials, presenting a potent approach for enhancing their overall strength. Here, a superior tensile strength-ductility synergy in a FeCoCrNiMo0.2 high entropy alloy (HEA) with high density dislocation and nano-twinning was achieved by employing cryo-rolling followed by subsequent annealing. Through electron microscope observation, the effects of geometrically necessary dislocation density and nano-twinning on tensile strength and plasticity are elucidated. The microstructure analysis reveals a substantial presence of dislocations and nano-twinning within the deformed grains following short-time annealing at 600 °C and 800 °C. The strategic presence of nano-twins serves as effective impediments to dislocation slip, resulting in the storage of dislocations within the grains, which contributes to the alloy's superior strength-ductility synergy and remarkable work hardening ability. Impressively, the obtained tensile strength-ductility matching exhibits yield strength and ductility values of 992.1 MPa/0.19 and 719 MPa/0.39, respectively. Upon increasing the annealing temperature to 1000 °C, high-density annealing twins emerge in the recrystallized grains, accompanied by a concomitant reduction in the geometrically necessary dislocation density due to dislocation rearrangement and annihilation. Furthermore, a small amount of topological close-packed (TCP) phase and L12 phase precipitation during annealing are observed, contributing to increased work hardening ability of the alloy. The findings underscore the importance of microstructural engineering as a valuable strategy for optimizing the mechanical properties of HEAs with a face-centered cubic structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Dynamically reversible shear transformations in a CrMnFeCoNi high-entropy alloy at cryogenic temperature10.1016/j.actamat.2022.117937 ↗
2. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
5. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications10.1016/j.actamat.2021.117288 ↗
6. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
7. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗
8. Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20
9. Enhanced strengthening effect via nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloys10.1016/j.msea.2023.144676 ↗
10. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
11. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
12. E.A.-s.M.P. Microstructure, Processing, Annealing hardening in cryo-rolled high-entropy alloys by belated deformation twinning10.1016/j.msea.2020.140403 ↗
13. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
14. Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects10.1016/j.jmst.2022.04.055 ↗
15. Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling10.1016/j.intermet.2022.107638 ↗
16. Break the strength-ductility trade-off in a transformation-induced plasticity high-entropy alloy reinforced with precipitation strengthening10.1016/j.jmst.2021.08.061 ↗
17. Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate10.1016/j.actamat.2020.02.035 ↗
18. Abnormal work hardening in a TRIP-assisted metastable β titanium alloy under high strain rate loading10.1016/j.msea.2022.142813 ↗
19. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility10.1016/j.actamat.2022.117847 ↗
20. Excellent strength-ductility combination in Co36Cr15Fe18Ni18Al8Ti4Mo1 multi-principal element alloys by dual-morphology B2 precipitates strengthening10.1016/j.jmst.2022.07.002 ↗
21. Hierarchical grain size and nanotwin gradient microstructure for improved mechanical properties of a non-equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2021.02.059 ↗
22. A superior strength-ductility synergy of Al0.1CrFeCoNi high-entropy alloy with fully recrystallized ultrafine grains and annealing twins10.1016/j.jmst.2022.06.003 ↗
23. Compounds, nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
24. Hardening by slip-twin and twin-twin interactions in FeMnNiCoCr10.1016/j.actamat.2018.04.054 ↗
25. Gradient nanotwinned CrCoNi medium-entropy alloy with strength-ductility synergy10.1016/j.scriptamat.2021.114117 ↗
26. Twinning in metastable high-entropy alloys10.1038/s41467-018-04780-x ↗
27. Enhancing mechanical properties of Al0.25CoCrFeNi high-entropy alloy via cold rolling and subsequent annealing10.1016/j.jallcom.2020.154645 ↗
28. Tailoring the strength and ductility of Al0.25CoCrFeNi high entropy alloy through cryo-rolling and annealing10.1016/j.msea.2021.141964 ↗
29. Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys10.1016/j.actamat.2018.02.048 ↗
30. Effect of annealing temperatures on microstructure and deformation behavior of Al0·1CrFeCoNi high-entropy alloy10.1016/j.msea.2020.140523 ↗
31. Effects of annealing process parameters on microstructural evolution and strength-ductility combination of CoCrFeMnNi high-entropy alloy10.1016/j.msea.2022.142880 ↗
32. Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy10.1016/j.jallcom.2019.152111 ↗
33. Evolution of the microstructure and mechanical properties of an sigma-hardened high-entropy alloy at different annealing temperatures10.1016/j.msea.2021.142140 ↗
34. Influences of recrystallisation and σ phase precipitation on the mechanical properties of CoFeNiMnV high-entropy alloy
35. Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy10.1016/j.msea.2018.11.136 ↗
36. Effect of Si content and annealing temperatures on microstructure, tensile properties of FeCoCrNiMn high entropy alloys10.1016/j.jallcom.2022.168090 ↗
37. Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy10.1016/j.msea.2017.04.111 ↗
38. Nanoscale B2 precipitation and strengthening behavior in Al0.5CoCrFeNi high-entropy alloy10.1016/j.matchar.2022.112156 ↗
39. Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment10.1016/j.jmatprotec.2020.116945 ↗
40. Geometrically necessary dislocations favor the Taylor uniform deformation mode in ultra-fine-grained polycrystals10.1016/j.actamat.2016.06.062 ↗
41. Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy10.1016/j.jmst.2022.09.020 ↗
42. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
43. Hetero-deformation-induced strengthening behavior of as-annealed Co30Cr30Fe18Ni18Mo4 high entropy alloy by metastable σ phase10.1016/j.msea.2022.144296 ↗
44. Effect of annealing on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion additive manufacturing10.1016/j.msea.2022.142868 ↗
45. Deformation mechanisms of FeCoCrNiMo0.2 high entropy alloy at 77 and 15 K10.1016/j.scriptamat.2019.11.026 ↗
46. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗
47. Influence of ordered L1(2) precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy10.1038/s41598-019-42870-y ↗
48. Evolution of fatigue mechanical properties and micro defects in nickel-based single crystal superalloys: a molecular dynamics research